RAID (Redundant Array of Independent Disks) is a method of combining multiple physical drives into one logical unit to improve performance, redundancy, or both.
+{{ t('tools.mttdl-calculator.texts.tag-raid-redundant-array-of-independent-disks-is-a-method-of-combining-multiple-physical-drives-into-one-logical-unit-to-improve-performance-redundancy-or-both') }}
| RAID Level | -Description | +{{ t('tools.mttdl-calculator.texts.tag-raid-level') }} | +{{ t('tools.mttdl-calculator.texts.tag-description') }} |
|---|---|---|---|
| RAID 0 | -Striping only. No redundancy. Fast but risky—if one drive fails, all data is lost. | +{{ t('tools.mttdl-calculator.texts.tag-raid-0') }} | +{{ t('tools.mttdl-calculator.texts.tag-striping-only-no-redundancy-fast-but-risky-if-one-drive-fails-all-data-is-lost') }} |
| RAID 1 | -Mirroring. Data is duplicated across drives. High redundancy, low capacity efficiency. | +{{ t('tools.mttdl-calculator.texts.tag-raid-1') }} | +{{ t('tools.mttdl-calculator.texts.tag-mirroring-data-is-duplicated-across-drives-high-redundancy-low-capacity-efficiency') }} |
| RAID 5 | -Striping with parity. Can tolerate one drive failure. Balanced speed and redundancy. | +{{ t('tools.mttdl-calculator.texts.tag-raid-5') }} | +{{ t('tools.mttdl-calculator.texts.tag-striping-with-parity-can-tolerate-one-drive-failure-balanced-speed-and-redundancy') }} |
| RAID 6 | -Double parity. Can survive two drive failures. | +{{ t('tools.mttdl-calculator.texts.tag-raid-6') }} | +{{ t('tools.mttdl-calculator.texts.tag-double-parity-can-survive-two-drive-failures') }} |
| RAID 10 | -Mirrored pairs striped together. High performance and redundancy. | +{{ t('tools.mttdl-calculator.texts.tag-raid-10') }} | +{{ t('tools.mttdl-calculator.texts.tag-mirrored-pairs-striped-together-high-performance-and-redundancy') }} |
| RAID-Z1/Z2/Z3 | -ZFS-based RAID levels with single, double, or triple parity. Designed for data integrity. | +{{ t('tools.mttdl-calculator.texts.tag-raid-z1-z2-z3') }} | +{{ t('tools.mttdl-calculator.texts.tag-zfs-based-raid-levels-with-single-double-or-triple-parity-designed-for-data-integrity') }} |
| RAID 50 | -Stripe of RAID 5 arrays. Combines performance of RAID 0 with redundancy of RAID 5. | +{{ t('tools.mttdl-calculator.texts.tag-raid-50') }} | +{{ t('tools.mttdl-calculator.texts.tag-stripe-of-raid-5-arrays-combines-performance-of-raid-0-with-redundancy-of-raid-5') }} |
The average time (in hours) a drive is expected to operate before failing. Higher MTBF means more reliable hardware.
+{{ t('tools.mttdl-calculator.texts.tag-the-average-time-in-hours-a-drive-is-expected-to-operate-before-failing-higher-mtbf-means-more-reliable-hardware') }}
-The time required to reconstruct data on a replacement drive after a failure. Longer rebuild times increase the risk of a second failure during recovery.
+{{ t('tools.mttdl-calculator.texts.tag-the-time-required-to-reconstruct-data-on-a-replacement-drive-after-a-failure-longer-rebuild-times-increase-the-risk-of-a-second-failure-during-recovery') }}
-A statistical estimate of how long a RAID system can operate before data loss occurs. It considers drive failures, rebuild time, and RAID redundancy. Higher MTTDL means a safer system.
+{{ t('tools.mttdl-calculator.texts.tag-a-statistical-estimate-of-how-long-a-raid-system-can-operate-before-data-loss-occurs-it-considers-drive-failures-rebuild-time-and-raid-redundancy-higher-mttdl-means-a-safer-system') }}
-The probability that a bit read from a disk will be incorrect due to hardware limitations. Even tiny BERs (like 1 in a trillion) can cause issues during rebuilds, especially with large drives.
+{{ t('tools.mttdl-calculator.texts.tag-the-probability-that-a-bit-read-from-a-disk-will-be-incorrect-due-to-hardware-limitations-even-tiny-bers-like-1-in-a-trillion-can-cause-issues-during-rebuilds-especially-with-large-drives') }}
-Occurs when a drive fails to read a sector during rebuild. BER contributes to URE risk, which can compromise RAID recovery.
+{{ t('tools.mttdl-calculator.texts.tag-occurs-when-a-drive-fails-to-read-a-sector-during-rebuild-ber-contributes-to-ure-risk-which-can-compromise-raid-recovery') }}
-Total storage per drive. Larger drives take longer to rebuild and are more susceptible to BER-related errors.
+{{ t('tools.mttdl-calculator.texts.tag-total-storage-per-drive-larger-drives-take-longer-to-rebuild-and-are-more-susceptible-to-ber-related-errors') }}
-The chance that the RAID system will experience data loss over a given time period (e.g., 5 years). Calculated using MTTDL and exponential failure models.
+{{ t('tools.mttdl-calculator.texts.tag-the-chance-that-the-raid-system-will-experience-data-loss-over-a-given-time-period-e-g-5-years-calculated-using-mttdl-and-exponential-failure-models') }}