diff --git a/locales/ar.yml b/locales/ar.yml index ae4bc0b0..9930efbd 100644 --- a/locales/ar.yml +++ b/locales/ar.yml @@ -176,6 +176,7 @@ tools: finance: تمويل default: تقصير toml: TOML + automation: الأتمتة password-strength-analyser: title: محلل قوة كلمة المرور description: اكتشف قوة كلمة المرور الخاصة بك باستخدام أداة التحليل هذه التي تعمل @@ -4836,6 +4837,7 @@ tools: label-permanent: دائم title-generated-fw-command: "أمر fw المُولَّد:" tag-const-zone-ref: منطقة ثابتة = مرجع + tooltip-remove: قم بإزالة هذا من القائمة title: مولد أوامر جدار الحماية description: إنشاء أوامر جدار الحماية (firewalld) fortune-wheel: @@ -4853,6 +4855,11 @@ tools: tag-clear-all-options: مسح جميع الخيارات tag-no-options-added-yet-add-some-options-to-start-spinning: لم تتم إضافة أي خيارات بعد. أضف بعض الخيارات لبدء الدوران! tag-: ✕ + wheel-options-wheeloptions-length: خيارات العجلات ({0}) + spinning: الغزل... + spin-to-win: أدر العجلة واربح! + spin-the-wheel: أدر العجلة! + checkbox-remove-winner-after-spin: إزالة الفائز بعد الدوران fstab-generator: title: مولد FStab description: إنشاء سطر /etc/fstab @@ -9110,6 +9117,10 @@ tools: label-azerty: أزيرتي label-dvorak: دفوراك label-colemak: كولماك + title: اختبار لوحة المفاتيح + description: اختبر مفاتيح لوحة المفاتيح وتأكد من عملها بشكل صحيح. يُعرض مؤشر + مرئي لكل ضغطة مفتاح، مع دعم مختلف تخطيطات لوحة المفاتيح. + externalAccess: باطل markdown-to-data: texts: label-paste-your-markdown-content: "ألصق محتوى Markdown الخاص بك:" @@ -9694,6 +9705,10 @@ tools: tag-copy-json-paths: انسخ مسارات JSON tag-generate-patch: إنشاء رقعة tag-apply-patch: قم بتطبيق التصحيح + title: أداة اختبار تصحيح JSON + description: أداة بسيطة لإنشاء واختبار تصحيحات JSON وفقًا لـ RFC 6902. وسرد + مسارات كائن JSON. + externalAccess: باطل ping: title: بينغ description: قم بإجراء اختبار اتصال (ping) لمجموعة من أسماء المضيفين أو عناوين @@ -10024,6 +10039,130 @@ tools: description: اختبر مكبرات الصوت وسماعات الرأس بتشغيل أصوات اختبارية. اضبط مستوى الصوت وتحقق من وضوح الصوت. externalAccess: باطل + current-loop-4-20ma-converter: + title: محول 4-20 مللي أمبير + description: قم بتحويل تيار 4-20 مللي أمبير (أو 0-20 مللي أمبير) إلى قيمة هندسية + والعكس، باستخدام تشخيص حلقة NAMUR NE 43. + texts: + signal-label: حاضِر + label-4-20-ma: 4-20 مللي أمبير + label-0-20-ma: 0-20 مللي أمبير + voltage-0-10v-converter: + title: محول 0-10 فولت + description: قم بتحويل جهد 0-10 فولت، أو 2-10 فولت، أو 0-5 فولت، أو 1-5 فولت، أو + ±10 فولت إلى قيمة هندسية والعكس. + texts: + signal-label: الجهد االكهربى + label-0-10-v: 0-10 فولت + label-2-10-v: 2-10 فولت + label-0-5-v: 0-5 فولت + label-1-5-v: 1-5 فولت + label-10-v: ±10 فولت + analog-scaling-calculator: + title: آلة حاسبة للقياس التناظري + description: قم بتحويل قيمة تناظرية خام لوحدة التحكم المنطقية القابلة للبرمجة + (Siemens 0-27648، Schneider 0-10000، 12/15/16 بت...) إلى قيمة هندسية ثم + أعد تحويلها إلى قيمة هندسية. + texts: + signal-label: القيمة الخام + preset-siemens-unipolar: سيمنز S7 أحادي القطب (من 0 إلى 27648) + preset-siemens-bipolar: سيمنز S7 ثنائي القطب (-27648 إلى 27648) + preset-schneider: شنايدر M340/M580 (من 0 إلى 10000) + preset-12-bits: 12 بت (من 0 إلى 4095) + preset-15-bits: 15 بت (من 0 إلى 32767) + preset-16-bits: 16 بت (من 0 إلى 65535) + paste-image: + texts: + copy-image: انسخ الصورة + copy-as-base64: انسخ بصيغة base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: لا يمكن لمتصفحك ترميز {0}. سيتم تنزيل الصورة كـ {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "الناتج: {0}، {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "الأصل: {0}، {1}" + image-width-image-height-px: "{0} × {1} بكسل" + clear-all: مسح الكل + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} تم لصقها في هذه الجلسة" + quality: "{0}%" + paste-from-clipboard: لصق من الحافظة + the-image-stays-in-your-browser-nothing-is-uploaded: تبقى الصورة في متصفحك. لا يتم تحميل أي شيء. + anywhere-on-this-page-to-paste-an-image: يمكنك لصق صورة في أي مكان على هذه الصفحة. + press: يضعط + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: لم يتمكن المتصفح من نسخ عنوان URL لبيانات base64 إلى الحافظة. + base64-data-url-copied-to-the-clipboard: تم نسخ رابط بيانات Base64 إلى الحافظة + the-browser-could-not-copy-the-image-to-the-clipboard: لم يتمكن المتصفح من نسخ الصورة إلى الحافظة. + image-copied-to-the-clipboard: تم نسخ الصورة إلى الحافظة + the-browser-could-not-read-the-clipboard: لم يتمكن المتصفح من قراءة الحافظة. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + قام المتصفح بحظر الوصول إلى الحافظة. اسمح بذلك في إعدادات الموقع، أو + اضغط على {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + لا يستطيع متصفحك قراءة الصور من الحافظة باستخدام زر. اضغط على {0} بدلاً + من ذلك. + the-browser-could-not-read-the-pasted-image: لم يتمكن المتصفح من قراءة الصورة الملصقة. + the-browser-could-not-convert-the-image: لم يتمكن المتصفح من تحويل الصورة. + the-clipboard-has-no-image-copy-an-image-then-try-again: لا توجد صورة في الحافظة. انسخ صورة، ثم حاول مرة أخرى. + ctrl-v: Ctrl + V + v: ⌘ + V + title: لصق الصورة + description: الصق صورة من الحافظة، وحوّلها إلى PNG أو JPEG أو WebP، ثم قم بتنزيلها. + externalAccess: باطل + whitespace-cleaner: + options: + texts: + convert-crlf-lf: تحويل CRLF → LF + lf-endings: نهايات LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: قم بقص الأسطر من اليسار وأعد ربط الفقرات لـ Reddit و Discord و Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: ضم الفقرات ذات الالتفاف المرن + smart-unwrap: فك التغليف الذكي + strip-from-patches: إزالة علامة الجمع والطرح {'@'}{'@'} من الرقع + diff-markers: علامات التفاضل + remove-common-leading-indent: إزالة المسافة البادئة المشتركة + indent: مسافة بادئة + collapse-2-blank-lines-into-1: قم بدمج سطرين فارغين أو أكثر في سطر واحد + blank-lines: خطوط فارغة + remove-end-of-line-whitespace: قم بإزالة المسافات البيضاء في نهاية السطر + trailing-space: مساحة خلفية + strip-prefixes: إزالة البادئات ●، ○، ⏺ + bullet-markers: علامات الرصاص + remove-characters: إزالة الأحرف ─ │ └ ┐ + box-drawing: رسم صندوقي + strip-color-escape-sequences: تسلسلات الهروب الملونة + ansi-codes: رموز ANSI + strip-1-2-1-t-prefixes: إزالة البادئات 1│، 2│، 1\\t + line-numbers: أرقام الأسطر + texts: + cleaning-options: خيارات التنظيف + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: ستظهر مخرجاتك المنقحة هنا. + paste-fragmented-claude-code-output-here: ألصق هنا مخرجات كود كلود المجزأة... + sample: عينة + paste: لصق + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: فشلت عملية النسخ. تم تحديد الملف الناتج. اضغط على Ctrl+C لنسخه. + copied-to-the-clipboard: تم نسخها إلى الحافظة. + the-clipboard-api-is-unavailable: واجهة برمجة تطبيقات الحافظة غير متاحة. + copy-failed: فشلت عملية النسخ + copied: تم النسخ ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} أسطر · {1} أحرف · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} أسطر · {1} أحرف" + title: منظف المساحات البيضاء + description: "تنظيف مخرجات الطرفية ورمز كلود: إزالة أرقام الأسطر، ورموز ANSI، + ورسم المربعات، وعلامات التعداد النقطي، وعلامات الاختلاف، والمسافات البيضاء + الإضافية." + externalAccess: باطل + cli-banner-generator: + title: مولد لافتات واجهة سطر الأوامر + description: قم بإنشاء لافتات ASCII ورسالة اليوم (MOTD) لتطبيقات CLI أو المحطة + الطرفية أو جهاز التوجيه الخاص بك. + externalAccess: باطل + texts: + label-border-char: "رمز الحدود:" + placeholder-: "8" + label-width-min-20-max-200: "العرض (الحد الأدنى 20 - الحد الأقصى 200):" + label-banner-text: "نص الشعار:" + placeholder-enter-motd-banner-text-here: أدخل نص شعار رسالة اليوم هنا... + title-generated-banner: تم إنشاء لافتة spanCopyable: copy: نسخ إلى الحافظة copied: تم النسخ! @@ -10048,3 +10187,40 @@ collapsibleToolMenu: collapsing: ينهار... collapse-all-tools: طي جميع الأدوات expand-all-tools: عرض جميع الأدوات +analogSignalConverter: + texts: + title-input: مدخل + title-parameters: حدود + title-output: الناتج + swap-direction: تبديل الاتجاه + status-ok: ضمن النطاق + copy-output: انسخ قيمة الإخراج + title-reference-points: نقاط مرجعية + label-signal-type: نوع الإشارة + preset-custom: مخصص + label-engineering-range: الحد الأدنى / الحد الأقصى للهندسة + label-engineering-unit: وحدة الهندسة + placeholder-unit: وحدة + error-signal-range: يجب أن تكون قيمة الإشارة الدنيا أقل من قيمة الإشارة القصوى. + error-engineering-range: يجب أن يكون الحد الأدنى للهندسة أقل من الحد الأقصى للهندسة. + label-engineering-value: القيمة الهندسية + label-rounded-signal: عدد صحيح مقرب + status-below-range: الإشارة خارج النطاق. + status-above-range: الإشارة أعلى من النطاق. + status-below-live-zero: الإشارة أقل من الصفر المباشر، تحقق من وجود سلك مقطوع أو مستشعر معطل. + engineering-below-range: إذا كانت القيمة أقل من النطاق الهندسي، فستكون الإشارة خارج النطاق. + engineering-above-range: إذا كانت القيمة أعلى من النطاق الهندسي، فستكون الإشارة خارج النطاق. + loop-status-failure-low: "فشل منخفض (≤ 3.6 مللي أمبير، NAMUR NE 43): حلقة + مكسورة، أو جهاز إرسال غير مزود بالطاقة أو معيب." + loop-status-uncertain-low: "بين 3.6 و 3.8 مللي أمبير: منطقة غير محددة، من + المحتمل حدوث عطل (NAMUR NE 43)." + loop-status-under-range: "النطاق الأدنى (من 3.8 إلى 4 مللي أمبير): يكون القياس + مشبعًا في أسفل النطاق." + loop-status-over-range: "تجاوز النطاق (20 إلى 20.5 مللي أمبير): يتم تشبع القياس عند أعلى النطاق." + loop-status-uncertain-high: "بين 20.5 و 21 مللي أمبير: منطقة غير محددة، من + المحتمل حدوث عطل (NAMUR NE 43)." + loop-status-failure-high: "فشل عالي (≥ 21 مللي أمبير، NAMUR NE 43): جهاز إرسال معيب أو دارة قصر." + label-formula: صيغة + formula-value: قيمة + formula-signal: إشارة + column-percent: يتراوح diff --git a/locales/da.yml b/locales/da.yml index b2bac8ab..e77b6b25 100644 --- a/locales/da.yml +++ b/locales/da.yml @@ -126,6 +126,7 @@ tools: finance: Finansiere default: Misligholdelse toml: TOML + automation: Automatisering password-strength-analyser: title: Kodeords styrke analysator description: Afslør styrken af dit kodeord med denne client-side-only kodeords @@ -4784,6 +4785,7 @@ tools: label-permanent: Permanent title-generated-fw-command: "Genereret fw-kommando:" tag-const-zone-ref: konstant zone = ref + tooltip-remove: Fjern fra denne liste title: firewalld kommandolinjegenerator description: Generer firewalld-kommandolinjer fortune-wheel: @@ -4803,6 +4805,11 @@ tools: Ingen muligheder tilføjet endnu. Tilføj nogle muligheder for at begynde at dreje! tag-: ✕ + wheel-options-wheeloptions-length: Hjulindstillinger ({0}) + spinning: Spinning... + spin-to-win: Spin for at vinde! + spin-the-wheel: Drej hjulet! + checkbox-remove-winner-after-spin: Fjern vinderen efter spin fstab-generator: title: FStab-generator description: Generer /etc/fstab-linjen @@ -9182,6 +9189,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Tastaturtester + description: Test dine tastaturtaster, og kontroller, om alle taster fungerer + korrekt. Visuel feedback for hvert tastetryk med understøttelse af + forskellige tastaturlayouts. + externalAccess: nul markdown-to-data: texts: label-paste-your-markdown-content: "Indsæt dit markdown-indhold:" @@ -9769,6 +9781,10 @@ tools: tag-copy-json-paths: Kopiér JSON-stier tag-generate-patch: Generer programrettelse tag-apply-patch: Påfør programrettelse + title: Json-patchtester + description: Et simpelt værktøj til at oprette og teste JSON-patches i henhold + til RFC 6902. Og liste stier til et JSON-objekt. + externalAccess: nul ping: title: Ping description: Ping et sæt værtsnavne, IP'er, CIDR eller IP-interval @@ -10098,6 +10114,132 @@ tools: description: Test dine højttalere og hovedtelefoner ved at afspille testlyde. Juster lydstyrken, og kontroller lyden. externalAccess: nul + current-loop-4-20ma-converter: + title: 4-20 mA konverter + description: Konverter en 4-20 mA (eller 0-20 mA) strøm til en teknisk værdi og + tilbage igen med NAMUR NE 43 loopdiagnostik. + texts: + signal-label: Strøm + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: 0-10 V konverter + description: Konverter en 0-10 V, 2-10 V, 0-5 V, 1-5 V eller ±10 V spænding til + en teknisk værdi og tilbage. + texts: + signal-label: Spænding + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Analog skaleringsberegner + description: Skalér en rå PLC analog værdi (Siemens 0-27648, Schneider 0-10000, + 12/15/16 bits...) til en teknisk værdi og tilbage. + texts: + signal-label: Rå værdi + preset-siemens-unipolar: Siemens S7 unipolar (0 til 27648) + preset-siemens-bipolar: Siemens S7 bipolar (-27648 til 27648) + preset-schneider: Schneider M340/M580 (0 til 10000) + preset-12-bits: 12 bit (0 til 4095) + preset-15-bits: 15 bit (0 til 32767) + preset-16-bits: 16 bit (0 til 65535) + paste-image: + texts: + copy-image: Kopiér billede + copy-as-base64: Kopiér som base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Din browser kan ikke kode {0}. Billedet downloades som {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Udgang: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Oprindelig: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Ryd alt + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} indsat i denne session" + quality: "{0}%" + paste-from-clipboard: Indsæt fra udklipsholder + the-image-stays-in-your-browser-nothing-is-uploaded: Billedet forbliver i din browser. Intet uploades. + anywhere-on-this-page-to-paste-an-image: hvor som helst på denne side for at indsætte et billede. + press: Trykke + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: Browseren kunne ikke kopiere base64-data-URL'en til udklipsholderen. + base64-data-url-copied-to-the-clipboard: Base64-data-URL kopieret til udklipsholderen + the-browser-could-not-copy-the-image-to-the-clipboard: Browseren kunne ikke kopiere billedet til udklipsholderen. + image-copied-to-the-clipboard: Billede kopieret til udklipsholderen + the-browser-could-not-read-the-clipboard: Browseren kunne ikke læse udklipsholderen. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Browseren blokerede adgang til udklipsholderen. Tillad det i + webstedsindstillingerne, eller tryk på {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Din browser kan ikke læse billeder fra udklipsholderen med en knap. Tryk + i stedet på {0}. + the-browser-could-not-read-the-pasted-image: Browseren kunne ikke læse det indsatte billede. + the-browser-could-not-convert-the-image: Browseren kunne ikke konvertere billedet. + the-clipboard-has-no-image-copy-an-image-then-try-again: Udklipsholderen har intet billede. Kopiér et billede, og prøv igen. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Indsæt billede + description: Indsæt et billede fra dit udklipsholder, konverter det til PNG, + JPEG eller WebP, og download det. + externalAccess: nul + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Konverter CRLF → LF + lf-endings: LF-slutninger + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Venstrebeskæring af linjer og genforbind afsnit for Reddit, Discord, + Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Forbind afsnit med blød ombrydning + smart-unwrap: Smart udpakning + strip-from-patches: Fjern + - {'@'}{'@'} fra patches + diff-markers: Differencemarkører + remove-common-leading-indent: Fjern fælles indledende indrykning + indent: Indryk + collapse-2-blank-lines-into-1: Skjul 2+ tomme linjer til 1 + blank-lines: Blanke linjer + remove-end-of-line-whitespace: Fjern mellemrum ved linjeslut + trailing-space: Efterfølgende plads + strip-prefixes: Fjern præfikser ●, ○, ⏺ + bullet-markers: Punktmarkører + remove-characters: Fjern ─ │ └ ┐ tegn + box-drawing: Kassetegning + strip-color-escape-sequences: Fjern farve-escape-sekvenser + ansi-codes: ANSI-koder + strip-1-2-1-t-prefixes: Fjern præfikser 1│, 2│, 1\t + line-numbers: Linjenumre + texts: + cleaning-options: Rengøringsmuligheder + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Dit rensede output vil blive vist her. + paste-fragmented-claude-code-output-here: Indsæt fragmenteret Claude Code-output her… + sample: Prøve + paste: Indsæt + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Kopiering + mislykkedes. Outputtet er valgt. Tryk på Ctrl+C for at kopiere det. + copied-to-the-clipboard: Kopieret til udklipsholderen. + the-clipboard-api-is-unavailable: Udklipsholder-API'en er ikke tilgængelig. + copy-failed: Kopiering mislykkedes + copied: Kopieret ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} linjer · {1} tegn · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} linjer · {1} tegn" + title: Rengøring af mellemrum + description: "Ren terminal og Claude Code output: strip linjenumre, ANSI-koder, + bokstegning, punktmarkører, diff-markører og ekstra mellemrum." + externalAccess: nul + cli-banner-generator: + title: CLI-bannergenerator + description: Generer ASCII-bannere, Dagens Besked (MOTD) til dine + CLI-applikationer, terminal eller router. + externalAccess: nul + texts: + label-border-char: "Kanttegn:" + placeholder-: "#" + label-width-min-20-max-200: "Bredde (min. 20 – maks. 200):" + label-banner-text: "Bannertekst:" + placeholder-enter-motd-banner-text-here: Indtast MOTD-bannertekst her... + title-generated-banner: Genereret banner about: alltools-title: Alle {toolsCount} værktøjer tools: @@ -10176,3 +10318,40 @@ collapsibleToolMenu: collapsing: Kollapser... collapse-all-tools: Skjul alle værktøjer expand-all-tools: Udvid alle værktøjer +analogSignalConverter: + texts: + title-input: Input + title-parameters: Parametre + title-output: Produktion + swap-direction: Skift retning + status-ok: Inden for rækkevidde + copy-output: Kopiér outputværdien + title-reference-points: Referencepunkter + label-signal-type: Signaltype + preset-custom: Skik + label-engineering-range: Ingeniør min/maks + label-engineering-unit: Ingeniørenhed + placeholder-unit: Enhed + error-signal-range: Signalminimum skal være lavere end signalmaksimum. + error-engineering-range: Det tekniske min. skal være lavere end det tekniske maks. + label-engineering-value: Ingeniørværdi + label-rounded-signal: Afrundet (heltal) + status-below-range: Signalet er under intervallet. + status-above-range: Signalet er over intervallet. + status-below-live-zero: Signalet er under live zero, kontroller for en brudt + ledning eller en defekt sensor. + engineering-below-range: Værdien er under det tekniske område, signalet vil være uden for området. + engineering-above-range: Værdien er over det tekniske område, signalet vil være uden for området. + loop-status-failure-low: "Lav fejl (≤ 3,6 mA, NAMUR NE 43): brudt sløjfe, + strømløs eller defekt transmitter." + loop-status-uncertain-low: "Mellem 3,6 og 3,8 mA: udefineret zone, en fejl er + sandsynlig (NAMUR NE 43)." + loop-status-under-range: "Under område (3,8 til 4 mA): Målingen er mættet i bunden af området." + loop-status-over-range: "Over område (20 til 20,5 mA): målingen er mættet i toppen af området." + loop-status-uncertain-high: "Mellem 20,5 og 21 mA: udefineret zone, en fejl er + sandsynlig (NAMUR NE 43)." + loop-status-failure-high: "Høj fejl (≥ 21 mA, NAMUR NE 43): defekt transmitter eller kortslutning." + label-formula: Formel + formula-value: værdi + formula-signal: signal + column-percent: Rækkevidde diff --git a/locales/de.yml b/locales/de.yml index af580d22..ddc5c7a8 100644 --- a/locales/de.yml +++ b/locales/de.yml @@ -197,6 +197,7 @@ tools: finance: Finanzen default: Standard toml: TOML + automation: Automatisierung password-strength-analyser: title: Passwortstärken-Analysator description: Ermittle die Stärke deines Passworts mit diesem Client-seitigen @@ -5071,6 +5072,7 @@ tools: label-permanent: Dauerhaft title-generated-fw-command: "Generierter FW-Befehl:" tag-const-zone-ref: Konstante Zone = Ref + tooltip-remove: Aus dieser Liste entfernen title: firewalld-Befehlszeilengenerator description: Generiere firewalld-Befehlszeilen fortune-wheel: @@ -5090,6 +5092,11 @@ tools: Noch keine Optionen hinzugefügt. Fügen Sie einige Optionen hinzu, um mit dem Drehen zu beginnen! tag-: ✕ + wheel-options-wheeloptions-length: Radoptionen ({0}) + spinning: Spinnen... + spin-to-win: Drehen und gewinnen! + spin-the-wheel: Dreh das Rad! + checkbox-remove-winner-after-spin: Gewinner nach dem Drehen entfernen fstab-generator: title: FStab-Generator description: Zeile /etc/fstab generieren @@ -9491,6 +9498,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Tastaturtester + description: Testen Sie Ihre Tastaturtasten und prüfen Sie, ob alle Tasten + einwandfrei funktionieren. Visuelles Feedback für jeden Tastendruck mit + Unterstützung für verschiedene Tastaturlayouts. + externalAccess: "null" markdown-to-data: texts: label-paste-your-markdown-content: "Fügen Sie Ihren Markdown-Inhalt ein:" @@ -10081,6 +10093,10 @@ tools: tag-copy-json-paths: JSON-Pfade kopieren tag-generate-patch: Patch generieren tag-apply-patch: Patch anwenden + title: JSON-Patch-Tester + description: Ein einfaches Werkzeug zum Erstellen und Testen von JSON-Patches + gemäß RFC 6902. Und zum Auflisten der Pfade eines JSON-Objekts. + externalAccess: "null" ping: title: Klingeln description: Eine Gruppe von Hostnamen, IPs, CIDRs oder IP-Adressbereichen anpingen @@ -10421,6 +10437,139 @@ tools: description: Testen Sie Ihre Lautsprecher und Kopfhörer, indem Sie Testtöne abspielen. Passen Sie die Lautstärke an und prüfen Sie die Klangqualität. externalAccess: "null" + current-loop-4-20ma-converter: + title: 4-20 mA Wandler + description: Mit dem NAMUR NE 43 Schleifendiagnosegerät können Sie einen 4-20 mA + (oder 0-20 mA) Strom in einen technischen Wert umwandeln und zurück. + texts: + signal-label: Aktuell + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: 0-10 V Wandler + description: Eine Spannung von 0-10 V, 2-10 V, 0-5 V, 1-5 V oder ±10 V in einen + technischen Wert umrechnen und zurück. + texts: + signal-label: Stromspannung + label-0-10-v: 0-10 V + label-2-10-v: 2-10 V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Analoger Skalierungsrechner + description: Einen rohen analogen SPS-Wert (Siemens 0-27648, Schneider 0-10000, + 12/15/16 Bit...) in einen technischen Wert umrechnen und zurück. + texts: + signal-label: Rohwert + preset-siemens-unipolar: Siemens S7 unipolar (0 bis 27648) + preset-siemens-bipolar: Siemens S7 bipolar (-27648 bis 27648) + preset-schneider: Schneider M340/M580 (0 bis 10000) + preset-12-bits: 12 Bit (0 bis 4095) + preset-15-bits: 15 Bit (0 bis 32767) + preset-16-bits: 16 Bit (0 bis 65535) + paste-image: + texts: + copy-image: Bild kopieren + copy-as-base64: Als Base64 kopieren + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + Ihr Browser kann {0} nicht kodieren. Das Bild wird als {1} + heruntergeladen. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Ausgabe: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Original: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Alles löschen + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} wurde in dieser Sitzung eingefügt" + quality: "{0}%" + paste-from-clipboard: Aus der Zwischenablage einfügen + the-image-stays-in-your-browser-nothing-is-uploaded: Das Bild bleibt in Ihrem Browser. Es wird nichts hochgeladen. + anywhere-on-this-page-to-paste-an-image: Sie können an beliebiger Stelle auf dieser Seite ein Bild einfügen. + press: Drücken + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + Der Browser konnte die Base64-Daten-URL nicht in die Zwischenablage + kopieren. + base64-data-url-copied-to-the-clipboard: Base64-Daten-URL in die Zwischenablage kopiert + the-browser-could-not-copy-the-image-to-the-clipboard: Der Browser konnte das Bild nicht in die Zwischenablage kopieren. + image-copied-to-the-clipboard: Bild in die Zwischenablage kopiert + the-browser-could-not-read-the-clipboard: Der Browser konnte die Zwischenablage nicht lesen. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Der Browser hat den Zugriff auf die Zwischenablage blockiert. Erlauben + Sie ihn in den Website-Einstellungen oder drücken Sie {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Ihr Browser kann Bilder aus der Zwischenablage nicht per Knopfdruck + lesen. Drücken Sie stattdessen {0}. + the-browser-could-not-read-the-pasted-image: Der Browser konnte das eingefügte Bild nicht lesen. + the-browser-could-not-convert-the-image: Der Browser konnte das Bild nicht konvertieren. + the-clipboard-has-no-image-copy-an-image-then-try-again: Die Zwischenablage + enthält kein Bild. Kopieren Sie ein Bild und versuchen Sie es erneut. + ctrl-v: Strg + V + v: ⌘ + V + title: Bild einfügen + description: Fügen Sie ein Bild aus Ihrer Zwischenablage ein, konvertieren Sie + es in PNG, JPEG oder WebP und laden Sie es herunter. + externalAccess: "null" + whitespace-cleaner: + options: + texts: + convert-crlf-lf: CRLF in LF umwandeln + lf-endings: LF-Endungen + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Zeilenumbrüche linksbündig abschneiden und Absätze für Reddit, Discord + und Slack wieder zusammenfügen + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Verbinden Sie weich umbrochene Absätze + smart-unwrap: Intelligentes Auspacken + strip-from-patches: Entfernen Sie + - {'@'}{'@'} aus Patches + diff-markers: Diff-Marker + remove-common-leading-indent: Gemeinsamen führenden Einzug entfernen + indent: Einzug + collapse-2-blank-lines-into-1: Reduziere 2 oder mehr Leerzeilen auf 1 + blank-lines: Leere Zeilen + remove-end-of-line-whitespace: Entferne die Leerzeichen am Zeilenende. + trailing-space: Nachlauf + strip-prefixes: Entfernen Sie die Präfixe ●, ○, ⏺. + bullet-markers: Kugelmarkierungen + remove-characters: Entferne die Zeichen ─ │ └ ┐ + box-drawing: Kastenzeichnung + strip-color-escape-sequences: Streifenfarben-Escape-Sequenzen + ansi-codes: ANSI-Codes + strip-1-2-1-t-prefixes: Streifen Sie die Präfixe 1│, 2│, 1\\t + line-numbers: Zeilennummern + texts: + cleaning-options: Reinigungsoptionen + ctrl-a-ctrl-c: ⌘/Strg+A · Strg+C + your-cleaned-output-will-appear-here: Ihre bereinigte Ausgabe wird hier angezeigt. + paste-fragmented-claude-code-output-here: Fügen Sie hier die fragmentierte Ausgabe des Claude-Codes ein… + sample: Probe + paste: Paste + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Kopiervorgang + fehlgeschlagen. Die Ausgabe ist ausgewählt. Drücken Sie Strg+C, um sie + zu kopieren. + copied-to-the-clipboard: In die Zwischenablage kopiert. + the-clipboard-api-is-unavailable: Die Clipboard-API ist nicht verfügbar. + copy-failed: Kopieren fehlgeschlagen + copied: Kopiert ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} Zeilen · {1} Zeichen · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} Zeilen · {1} Zeichen" + title: Whitespace Cleaner + description: "Saubere Terminal- und Claude-Code-Ausgabe: Streifenzeilennummern, + ANSI-Codes, Rahmenzeichnung, Aufzählungszeichen, Differenzzeichen und + zusätzliche Leerzeichen." + externalAccess: "null" + cli-banner-generator: + title: CLI-Banner-Generator + description: Generieren Sie ASCII-Banner und Nachrichten des Tages (MOTD) für + Ihre CLI-Anwendungen, Ihr Terminal oder Ihren Router. + externalAccess: "null" + texts: + label-border-char: "Rahmenzeichen:" + placeholder-: "#" + label-width-min-20-max-200: "Breite (Min. 20 – Max. 200):" + label-banner-text: "Bannertext:" + placeholder-enter-motd-banner-text-here: Hier den Text für das MOTD-Banner eingeben... + title-generated-banner: Generiertes Banner locale-selector: select-a-language: Wählen Sie eine Sprache collapsibleToolMenu: @@ -10429,3 +10578,47 @@ collapsibleToolMenu: collapsing: Zusammenbrechen... collapse-all-tools: Alle Werkzeuge ausblenden expand-all-tools: Alle Werkzeuge ausklappen +analogSignalConverter: + texts: + title-input: Eingang + title-parameters: Parameter + title-output: Ausgabe + swap-direction: Richtung wechseln + status-ok: Im Bereich + copy-output: Kopiere den Ausgabewert + title-reference-points: Bezugspunkte + label-signal-type: Signalart + preset-custom: Brauch + label-engineering-range: Technisches Minimum / Maximum + label-engineering-unit: Ingenieurabteilung + placeholder-unit: Einheit + error-signal-range: Das Signalminimum muss kleiner sein als das Signalmaximum. + error-engineering-range: Der technische Mindestwert muss niedriger sein als der + technische Höchstwert. + label-engineering-value: Technischer Wert + label-rounded-signal: Gerundet (ganze Zahl) + status-below-range: Das Signal liegt unterhalb der Reichweite. + status-above-range: Das Signal liegt über dem Messbereich. + status-below-live-zero: Das Signal liegt unterhalb des Nullpunkts. Prüfen Sie, + ob ein Kabel gebrochen oder der Sensor defekt ist. + engineering-below-range: Der Wert liegt unterhalb des technischen Messbereichs, + das Signal liegt außerhalb des Messbereichs. + engineering-above-range: Der Wert liegt über dem technischen Messbereich, das + Signal liegt außerhalb des Messbereichs. + loop-status-failure-low: "Niedrige Ausfallrate (≤ 3,6 mA, NAMUR NE 43): + unterbrochener Stromkreis, nicht mit Strom versorgter oder defekter + Messumformer." + loop-status-uncertain-low: "Zwischen 3,6 und 3,8 mA: undefinierter Bereich, ein + Ausfall ist wahrscheinlich (NAMUR NE 43)." + loop-status-under-range: "Unterer Messbereich (3,8 bis 4 mA): Die Messung ist am + unteren Ende des Messbereichs gesättigt." + loop-status-over-range: "Überschreitung des Messbereichs (20 bis 20,5 mA): Die + Messung ist am oberen Ende des Messbereichs gesättigt." + loop-status-uncertain-high: "Zwischen 20,5 und 21 mA: undefinierter Bereich, ein + Ausfall ist wahrscheinlich (NAMUR NE 43)." + loop-status-failure-high: "Hoher Ausfall (≥ 21 mA, NAMUR NE 43): Fehlerhafter + Messumformer oder Kurzschluss." + label-formula: Formel + formula-value: Wert + formula-signal: Signal + column-percent: Reichweite diff --git a/locales/el.yml b/locales/el.yml index 9e148f65..b5798bf0 100644 --- a/locales/el.yml +++ b/locales/el.yml @@ -4430,6 +4430,7 @@ tools: label-permanent: Μόνιμος title-generated-fw-command: "Δημιουργήθηκε εντολή fw:" tag-const-zone-ref: σταθερή ζώνη = αναφ. + tooltip-remove: Αφαίρεση από αυτήν τη λίστα title: γεννήτρια γραμμής εντολών firewalld description: Δημιουργία γραμμών εντολών firewalld fortune-wheel: @@ -4449,6 +4450,11 @@ tools: Δεν έχουν προστεθεί ακόμη επιλογές. Προσθέστε μερικές επιλογές για να ξεκινήσετε την περιστροφή! tag-: ✕ + wheel-options-wheeloptions-length: Επιλογές τροχού ({0}) + spinning: Κλώση... + spin-to-win: Γυρίστε για να κερδίσετε! + spin-the-wheel: Γυρίστε τον τροχό! + checkbox-remove-winner-after-spin: Αφαίρεση νικητή μετά την περιστροφή fstab-generator: title: Γεννήτρια FStab description: Δημιουργήστε τη γραμμή /etc/fstab @@ -5340,6 +5346,7 @@ tools: finance: Οικονομικά default: Αθέτηση toml: ΤΟΜΛ + automation: Αυτοματοποίηση websocket-tester: title: Δοκιμή Websocket description: Επιτρέπει τον έλεγχο συνδέσεων WebSocket @@ -9530,6 +9537,11 @@ tools: label-azerty: ΑΖΕΡΤΙ label-dvorak: Ντβόρακ label-colemak: ΚΟΛΕΜΑΚ + title: Δοκιμαστής πληκτρολογίου + description: Δοκιμάστε τα πλήκτρα του πληκτρολογίου σας και ελέγξτε αν όλα + λειτουργούν σωστά. Οπτική ανατροφοδότηση για κάθε πάτημα πλήκτρου με + υποστήριξη για διαφορετικές διατάξεις πληκτρολογίου. + externalAccess: άκυρος markdown-to-data: texts: label-paste-your-markdown-content: "Επικολλήστε το περιεχόμενο της έκπτωσης:" @@ -10127,6 +10139,11 @@ tools: tag-copy-json-paths: Αντιγραφή διαδρομών JSON tag-generate-patch: Δημιουργία ενημέρωσης κώδικα tag-apply-patch: Εφαρμογή έμπλαστρου + title: Δοκιμαστής ενημερώσεων κώδικα Json + description: Ένα απλό εργαλείο για τη δημιουργία και τον έλεγχο ενημερώσεων + κώδικα JSON σύμφωνα με το RFC 6902. Και καταγραφή διαδρομών ενός + αντικειμένου JSON. + externalAccess: άκυρος ping: title: Πινγκ description: Ping σε ένα σύνολο ονομάτων κεντρικού υπολογιστή, IP, CIDR ή εύρους IP @@ -10466,9 +10483,184 @@ tools: description: Δοκιμάστε τα ηχεία και τα ακουστικά σας αναπαράγοντας δοκιμαστικούς ήχους. Ρυθμίστε την ένταση και ελέγξτε την καθαρότητα του ήχου. externalAccess: άκυρος + current-loop-4-20ma-converter: + title: Μετατροπέας 4-20 mA + description: Μετατρέψτε ένα ρεύμα 4-20 mA (ή 0-20 mA) σε μια τιμή μηχανικής και + αντίστροφα, με τη διαγνωστική λειτουργία βρόχου NAMUR NE 43. + texts: + signal-label: Ρεύμα + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: Μετατροπέας 0-10 V + description: Μετατρέψτε μια τάση 0-10 V, 2-10 V, 0-5 V, 1-5 V ή ±10 V σε μια + μηχανική τιμή και αντίστροφα. + texts: + signal-label: Δυναμικό + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Αναλογική αριθμομηχανή κλιμάκωσης + description: Μετατρέψτε μια ακατέργαστη αναλογική τιμή PLC (Siemens 0-27648, + Schneider 0-10000, 12/15/16 bits...) σε μια τιμή μηχανικής και αντίστροφα. + texts: + signal-label: Ακατέργαστη τιμή + preset-siemens-unipolar: Siemens S7 μονοπολικό (0 έως 27648) + preset-siemens-bipolar: Διπολικός φορτιστής Siemens S7 (-27648 έως 27648) + preset-schneider: Σνάιντερ M340/M580 (0 έως 10000) + preset-12-bits: 12 bit (0 έως 4095) + preset-15-bits: 15 bit (0 έως 32767) + preset-16-bits: 16 bit (0 έως 65535) + paste-image: + texts: + copy-image: Αντιγραφή εικόνας + copy-as-base64: Αντιγραφή ως base64 + getoutputextension-image: "{0}" + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + Το πρόγραμμα περιήγησής σας δεν μπορεί να κωδικοποιήσει το {0}. Η εικόνα + λαμβάνεται ως {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Έξοδος: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Πρωτότυπο: {0}, {1}" + image-width-image-height-px: "{0} × {1} εικονοστοιχεία" + clear-all: Διαγραφή όλων + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} επικολλήθηκε σε αυτήν την περίοδο σύνδεσης" + quality: "{0}%" + paste-from-clipboard: Επικόλληση από το πρόχειρο + the-image-stays-in-your-browser-nothing-is-uploaded: Η εικόνα παραμένει στο + πρόγραμμα περιήγησής σας. Δεν μεταφορτώνεται τίποτα. + anywhere-on-this-page-to-paste-an-image: οπουδήποτε σε αυτήν τη σελίδα για να επικολλήσετε μια εικόνα. + press: Τύπος + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + Το πρόγραμμα περιήγησης δεν μπόρεσε να αντιγράψει τη διεύθυνση URL + δεδομένων base64 στο πρόχειρο. + base64-data-url-copied-to-the-clipboard: Η διεύθυνση URL δεδομένων Base64 αντιγράφηκε στο πρόχειρο + the-browser-could-not-copy-the-image-to-the-clipboard: Το πρόγραμμα περιήγησης + δεν μπόρεσε να αντιγράψει την εικόνα στο πρόχειρο. + image-copied-to-the-clipboard: Η εικόνα αντιγράφηκε στο πρόχειρο + the-browser-could-not-read-the-clipboard: Το πρόγραμμα περιήγησης δεν μπόρεσε να διαβάσει το πρόχειρο. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Το πρόγραμμα περιήγησης απέκλεισε την πρόσβαση στο πρόχειρο. Επιτρέψτε + την στις ρυθμίσεις ιστότοπου ή πατήστε {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Το πρόγραμμα περιήγησής σας δεν μπορεί να διαβάσει εικόνες από το + πρόχειρο με ένα κουμπί. Πατήστε {0} αντί αυτού. + the-browser-could-not-read-the-pasted-image: Το πρόγραμμα περιήγησης δεν μπόρεσε να διαβάσει την επικολλημένη εικόνα. + the-browser-could-not-convert-the-image: Το πρόγραμμα περιήγησης δεν μπόρεσε να μετατρέψει την εικόνα. + the-clipboard-has-no-image-copy-an-image-then-try-again: Το πρόχειρο δεν έχει εικόνα. Αντιγράψτε μια εικόνα και δοκιμάστε ξανά. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Επικόλληση εικόνας + description: Επικολλήστε μια εικόνα από το πρόχειρο, μετατρέψτε την σε PNG, JPEG + ή WebP και κατεβάστε την. + externalAccess: άκυρος + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Μετατροπή CRLF → LF + lf-endings: Τελειώματα LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Αριστερή περικοπή γραμμών και επανένωση παραγράφων για Reddit, + Discord, Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Σύνδεση παραγράφων με απαλή αναδίπλωση + smart-unwrap: Έξυπνη αποσυσκευασία + strip-from-patches: Απογύμνωση + - {'@'}{'@'} από ενημερώσεις κώδικα + diff-markers: Δείκτες διαφοράς + remove-common-leading-indent: Αφαίρεση κοινής αρχικής εσοχής + indent: Δαντελώνω + collapse-2-blank-lines-into-1: Σύμπτυξη 2+ κενών γραμμών σε 1 + blank-lines: Κενές γραμμές + remove-end-of-line-whitespace: Αφαίρεση κενού στο τέλος της γραμμής + trailing-space: Χώρος στο τέλος + strip-prefixes: Προθέματα Strip ●, ○, ⏺ + bullet-markers: Δείκτες κουκκίδων + remove-characters: Αφαίρεση χαρακτήρων ─ │ └ ┐ + box-drawing: Σχέδιο κουτιού + strip-color-escape-sequences: Ακολουθίες διαφυγής χρώματος λωρίδας + ansi-codes: Κώδικες ANSI + strip-1-2-1-t-prefixes: Προθέματα Strip 1│, 2│, 1\\t + line-numbers: Αριθμοί γραμμών + texts: + cleaning-options: Επιλογές καθαρισμού + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Το καθαρισμένο σας αποτέλεσμα θα εμφανιστεί εδώ. + paste-fragmented-claude-code-output-here: Επικολλήστε εδώ την κατακερματισμένη έξοδο του κώδικα Claude… + sample: Δείγμα + paste: Πάστα + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Η αντιγραφή απέτυχε. + Η έξοδος έχει επιλεγεί. Πατήστε Ctrl+C για να την αντιγράψετε. + copied-to-the-clipboard: Αντιγράφηκε στο πρόχειρο. + the-clipboard-api-is-unavailable: Το API του Πρόχειρου δεν είναι διαθέσιμο. + copy-failed: Η αντιγραφή απέτυχε. + copied: Αντιγράφηκε ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} γραμμές · {1} χαρακτήρες · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} γραμμές · {1} χαρακτήρες" + title: Καθαριστικό κενών χώρων + description: "Καθαρή έξοδος τερματικού και κώδικα Claude: αριθμοί γραμμών + λωρίδας, κωδικοί ANSI, σχέδιο πλαισίου, δείκτες κουκκίδων, δείκτες + διαφοράς και επιπλέον κενό διάστημα." + externalAccess: άκυρος + cli-banner-generator: + title: Γεννήτρια banner CLI + description: Δημιουργήστε banner ASCII, Μήνυμα της Ημέρας (MOTD) για τις + εφαρμογές CLI, το τερματικό ή τον δρομολογητή σας. + externalAccess: άκυρος + texts: + label-border-char: "Χαρακτήρας ορίων:" + placeholder-: "#" + label-width-min-20-max-200: "Πλάτος (Ελάχιστο 20 – Μέγιστο 200):" + label-banner-text: "Κείμενο banner:" + placeholder-enter-motd-banner-text-here: Εισαγάγετε εδώ κείμενο banner MOTD... + title-generated-banner: Δημιουργημένο banner collapsibleToolMenu: text: expanding: Επέκταση... collapsing: Κατάρρευση... collapse-all-tools: Σύμπτυξη όλων των εργαλείων expand-all-tools: Ανάπτυξη όλων των εργαλείων +analogSignalConverter: + texts: + title-input: Εισαγωγή + title-parameters: Παράμετροι + title-output: Παραγωγή + swap-direction: Αλλαγή κατεύθυνσης + status-ok: Εντός εμβέλειας + copy-output: Αντιγράψτε την τιμή εξόδου + title-reference-points: Σημεία αναφοράς + label-signal-type: Τύπος σήματος + preset-custom: Εθιμο + label-engineering-range: Ελάχ. / Μέγ. Μηχανικής + label-engineering-unit: Μονάδα Μηχανικών + placeholder-unit: Μονάδα + error-signal-range: Το ελάχιστο σήμα πρέπει να είναι χαμηλότερο από το μέγιστο σήμα. + error-engineering-range: Η ελάχιστη μηχανική τιμή πρέπει να είναι χαμηλότερη από + τη μέγιστη μηχανική τιμή. + label-engineering-value: Μηχανική αξία + label-rounded-signal: Στρογγυλοποιημένο (ακέραιος) + status-below-range: Το σήμα είναι κάτω από το εύρος. + status-above-range: Το σήμα είναι πάνω από το εύρος. + status-below-live-zero: Το σήμα είναι κάτω από το μηδέν, ελέγξτε για σπασμένο + καλώδιο ή ελαττωματικό αισθητήρα. + engineering-below-range: Εάν η τιμή είναι κάτω από το εύρος μηχανικής, το σήμα + θα είναι εκτός εύρους. + engineering-above-range: Εάν η τιμή είναι πάνω από το εύρος μηχανικής, το σήμα + θα είναι εκτός εύρους. + loop-status-failure-low: "Χαμηλή βλάβη (≤ 3,6 mA, NAMUR NE 43): σπασμένος + βρόχος, πομπός χωρίς τροφοδοσία ή ελαττωματικός." + loop-status-uncertain-low: "Μεταξύ 3,6 και 3,8 mA: απροσδιόριστη ζώνη, πιθανή + είναι η βλάβη (NAMUR NE 43)." + loop-status-under-range: "Κάτω από το εύρος (3,8 έως 4 mA): η μέτρηση είναι + κορεσμένη στο κάτω μέρος του εύρους." + loop-status-over-range: "Υπέρβαση εύρους (20 έως 20,5 mA): η μέτρηση είναι + κορεσμένη στην κορυφή του εύρους." + loop-status-uncertain-high: "Μεταξύ 20,5 και 21 mA: απροσδιόριστη ζώνη, πιθανή + είναι η βλάβη (NAMUR NE 43)." + loop-status-failure-high: "Υψηλή βλάβη (≥ 21 mA, NAMUR NE 43): ελαττωματικός πομπός ή βραχυκύκλωμα." + label-formula: Τύπος + formula-value: αξία + formula-signal: σύνθημα + column-percent: Σειρά diff --git a/locales/en.yml b/locales/en.yml index e2c4a0bc..eeccaa4a 100644 --- a/locales/en.yml +++ b/locales/en.yml @@ -1,4 +1,4 @@ -'404': +"404": notFound: 404 Not Found sorry: Sorry, this page does not seem to exist maybe: Maybe the cache is doing tricky things, try force-refreshing? @@ -51,9 +51,9 @@ about: put-your-favorites-json-array-here: Put your favorites JSON array here... import-button: Import favorites-imported-successfully: Favorites imported successfully! - error-importing-favorites-e: 'Error importing favorites: {0}' + error-importing-favorites-e: "Error importing favorites: {0}" text: - collection-of-handy-online-tools-for-developers-with-great-ux-it-tools-is-a-free-and-open-source-collection-of-handy-online-tools-for-developers-and-people-working-in-it: >- + collection-of-handy-online-tools-for-developers-with-great-ux-it-tools-is-a-free-and-open-source-collection-of-handy-online-tools-for-developers-and-people-working-in-it: Collection of handy online tools for developers, with great UX. IT Tools is a free and open-source collection of handy online tools for developers & people working in IT. @@ -120,7 +120,7 @@ home: themeDark: Dark page: text: - collection-of-handy-online-tools-for-developers-with-great-ux-it-tools-is-a-free-and-open-source-collection-of-handy-online-tools-for-developers-and-people-working-in-it: >- + collection-of-handy-online-tools-for-developers-with-great-ux-it-tools-is-a-free-and-open-source-collection-of-handy-online-tools-for-developers-and-people-working-in-it: Collection of handy online tools for developers, with great UX. IT Tools is a free and open-source collection of handy online tools for developers & people working in IT. @@ -137,18 +137,18 @@ tools: reset: Reset fit: Fit change-image: Change Image - aspect-ratio: 'Aspect Ratio:' - custom-ratio: 'Custom Ratio:' - background-color: 'Background Color:' + aspect-ratio: "Aspect Ratio:" + custom-ratio: "Custom Ratio:" + background-color: "Background Color:" transparent: Transparent - zoom-image: 'Zoom Image:' - rotate-image: 'Rotate Image:' - rule-of-thirds-grid: 'Rule-of-Thirds Grid:' + zoom-image: "Zoom Image:" + rotate-image: "Rotate Image:" + rule-of-thirds-grid: "Rule-of-Thirds Grid:" export-settings: Export Settings - export-format: 'Export Format:' - image-quality: 'Image Quality:' - export-width: 'Export Width:' - custom-width: 'Custom Width (px):' + export-format: "Export Format:" + image-quality: "Image Quality:" + export-width: "Export Width:" + custom-width: "Custom Width (px):" export-download-image: Export & Download Cropped Image ratio-square: 1:1 (Square) ratio-widescreen: 16:9 (Widescreen) @@ -165,18 +165,16 @@ tools: label-webp: WebP chronometer: title: Chronometer - description: >- - Monitor the duration of a thing. Basically a chronometer with simple - chronometer features. + description: Monitor the duration of a thing. Basically a chronometer with + simple chronometer features. button: start: Start stop: Stop reset: Reset token-generator: title: Token generator - description: >- - Generate random string with the chars you want, uppercase or lowercase - letters, numbers and/or symbols. + description: Generate random string with the chars you want, uppercase or + lowercase letters, numbers and/or symbols. uppercase: Uppercase (ABC...) lowercase: Lowercase (abc...) numbers: Numbers (123...) @@ -194,17 +192,16 @@ tools: label-allow-ambiguous-characters: Allows Visually Ambigous Characters percentage-calculator: title: Percentage calculator - description: >- - Easily calculate percentages from a value to another value, or from a - percentage to a value. + description: Easily calculate percentages from a value to another value, or from + a percentage to a value. texts: placeholder-x: X - placeholder-y: 'Y' + placeholder-y: Y placeholder-result: Result placeholder-from: From placeholder-to: To tag-what-is: What is - tag-of: '% of' + tag-of: "% of" tag-x-is-what-percent-of-y: X is what percent of Y tag-is-what-percent-of: is what percent of tag-what-is-the-percentage-increase-decrease: What is the percentage increase/decrease @@ -213,19 +210,19 @@ tools: description: Calculate the tip for a bill and split it among multiple people. texts: title-bill-details: Bill Details - label-bill-amount: 'Bill Amount:' + label-bill-amount: "Bill Amount:" placeholder-total-bill: Total Bill - label-tip-percentage: 'Tip Percentage:' + label-tip-percentage: "Tip Percentage:" placeholder-tip: Tip % - label-number-of-person: 'Number of person:' + label-number-of-person: "Number of person:" placeholder-people: People title-results: Results - label-tip-amount: 'Tip Amount:' - label-total-bill: 'Total Bill:' - label-amount-per-person: 'Amount Per Person:' + label-tip-amount: "Tip Amount:" + label-total-bill: "Total Bill:" + label-amount-per-person: "Amount Per Person:" title-quick-tip: Quick Tip % tag-const-billamount-ref: const billAmount = ref - tag-: '%' + tag-: "%" svg-placeholder-generator: title: SVG placeholder generator description: Generate svg images to use as a placeholder in your applications. @@ -266,9 +263,9 @@ tools: title: Camera recorder description: Take a picture or record a video from your webcam or camera. texts: - label-video: 'Video:' + label-video: "Video:" placeholder-select-camera: Select camera - label-audio: 'Audio:' + label-audio: "Audio:" placeholder-select-microphone: Select microphone tag-your-browser-does-not-support-recording-video-from-camera: Your browser does not support recording video from camera tag-you-need-to-grant-permission-to-use-your-camera-and-microphone: You need to grant permission to use your camera and microphone @@ -282,33 +279,31 @@ tools: tag-video-recording-is-not-supported-in-your-browser: Video recording is not supported in your browser keycode-info: title: Keycode info - description: >- - Find the javascript keycode, code, location and modifiers of any pressed - key. + description: Find the javascript keycode, code, location and modifiers of any + pressed key. texts: - label-key: 'Key :' - label-keycode: 'Keycode :' - label-code: 'Code :' - label-location: 'Location :' - label-modifiers: 'Modifiers :' + label-key: "Key :" + label-keycode: "Keycode :" + label-code: "Code :" + label-location: "Location :" + label-modifiers: "Modifiers :" tag-press-the-key-on-your-keyboard-you-want-to-get-info-about-this-key: Press the key on your keyboard you want to get info about this key - label-scancode: 'Scancode (hex) :' - label-scancode-dec: 'Scancode (dec) :' + label-scancode: "Scancode (hex) :" + label-scancode-dec: "Scancode (dec) :" bcrypt: title: Bcrypt - description: >- - Hash and compare text string using bcrypt. Bcrypt is a password-hashing - function based on the Blowfish cipher. + description: Hash and compare text string using bcrypt. Bcrypt is a + password-hashing function based on the Blowfish cipher. texts: text-hashed-string-copied-to-the-clipboard: Hashed string copied to the clipboard title-hash: Hash placeholder-your-string-to-bcrypt: Your string to bcrypt... - label-your-string: 'Your string: ' - label-salt-count: 'Salt count: ' + label-your-string: "Your string: " + label-salt-count: "Salt count: " placeholder-salt-rounds: Salt rounds... title-compare-string-with-hash: Compare string with hash placeholder-your-string-to-compare: Your string to compare... - label-your-hash: 'Your hash: ' + label-your-hash: "Your hash: " placeholder-your-hash-to-compare: Your hash to compare... tag-copy-hash: Copy hash hashed-string: Hashed string @@ -320,28 +315,26 @@ tools: compared-in-elapsed-period: Compared in {elapsedPeriod} crontab-generator: title: Crontab generator - description: >- - Validate and generate crontab and get the human-readable description of - the cron schedule. + description: Validate and generate crontab and get the human-readable + description of the cron schedule. texts: message-this-cron-is-invalid: This cron is invalid - placeholder-: '* * * * *' + placeholder-: "* * * * *" label-unix-standard: Unix standard label-aws: AWS label-verbose: Verbose label-use-24-hour-time-format: Use 24 hour time format label-days-start-at-0: Days start at 0 label-months-start-at-0: Months start at 0 - label-timezone: 'Timezone:' - tag-symbol: 'Symbol:' - tag-meaning: 'Meaning:' - tag-example: 'Example:' - tag-equivalent: 'Equivalent:' + label-timezone: "Timezone:" + tag-symbol: "Symbol:" + tag-meaning: "Meaning:" + tag-example: "Example:" + tag-equivalent: "Equivalent:" sql-prettify: title: SQL prettify and format - description: >- - Format and prettify your SQL queries online (it supports various SQL - dialects). + description: Format and prettify your SQL queries online (it supports various + SQL dialects). texts: label-uppercase: UPPERCASE label-lowercase: lowercase @@ -380,14 +373,13 @@ tools: title-parsing-error: Parsing error benchmark-builder: title: Benchmark builder - description: >- - Easily compare execution time of tasks with this very simple online + description: Easily compare execution time of tasks with this very simple online benchmark builder. texts: label-suite-name: Suite name placeholder-suite-name: Suite name... label-suite-values: Suite values - placeholder-unit-eg-ms: 'Unit (eg: ms)' + placeholder-unit-eg-ms: "Unit (eg: ms)" label-unit: Unit tag-delete-suite: Delete suite tag-add-suite: Add suite @@ -398,48 +390,45 @@ tools: tag-add-a-measure: Add a measure git-memo: title: Git cheatsheet - description: >- - Git is a decentralized version management software. With this cheatsheet, - you will have quick access to the most common git commands. + description: Git is a decentralized version management software. With this + cheatsheet, you will have quick access to the most common git commands. slugify-string: title: Slugify string description: Make a string url, filename and id safe. texts: text-slug-copied-to-clipboard: Slug copied to clipboard - placeholder-put-your-string-here-ex-my-file-path: 'Put your string here (ex: My file path)' + placeholder-put-your-string-here-ex-my-file-path: "Put your string here (ex: My file path)" label-your-string-to-slugify: Your string to slugify placeholder-put-separator-char-here: Put separator char here label-separator-character: Separator character - placeholder-you-slug-will-be-generated-here-ex-my-file-path: 'You slug will be generated here (ex: my-file-path)' + placeholder-you-slug-will-be-generated-here-ex-my-file-path: "You slug will be generated here (ex: my-file-path)" label-your-slug: Your slug tag-copy-slug: Copy slug encryption: title: Encrypt / decrypt text - description: >- - Encrypt clear text and decrypt ciphertext using crypto algorithms like - AES, TripleDES, Rabbit or RC4. + description: Encrypt clear text and decrypt ciphertext using crypto algorithms + like AES, TripleDES, Rabbit or RC4. defaultErrorMessage: Unable to cypher your text title-encrypt: Encrypt title-decrypt: Decrypt texts: label-plain-text: Plain Text label-hexadecimal-text: Hexadecimal Text - label-your-text: 'Your text:' + label-your-text: "Your text:" placeholder-the-string-to-cypher: The string to cypher - label-your-secret-key: 'Your secret key:' + label-your-secret-key: "Your secret key:" label-key-encoding: Key encoding placeholder-select-the-key-encoding: Select the key encoding... - label-encryption-algorithm: 'Encryption algorithm:' + label-encryption-algorithm: "Encryption algorithm:" title-error-while-cyphering: Error while cyphering - label-your-text-encrypted: 'Your text encrypted:' + label-your-text-encrypted: "Your text encrypted:" placeholder-your-string-hash: Your string hash - label-your-encrypted-text: 'Your encrypted text:' + label-your-encrypted-text: "Your encrypted text:" title-error-while-decrypting: Error while decrypting - label-your-decrypted-text: 'Your decrypted text:' + label-your-decrypted-text: "Your decrypted text:" random-port-generator: title: Random port generator - description: >- - Generate random port numbers outside of the range of "known" ports + description: Generate random port numbers outside of the range of "known" ports (0-1023). texts: text-port-copied-to-the-clipboard: Port copied to the clipboard @@ -448,16 +437,14 @@ tools: yaml-prettify: title: YAML prettify and format description: Prettify your YAML string into a friendly, human-readable format. - externalAccess: >- - This tool may download a JSON schema from https://www.schemastore.org (or - the configured schema catalog) when validation is requested. No data is - sent externally. + externalAccess: This tool may download a JSON schema from + https://www.schemastore.org (or the configured schema catalog) when + validation is requested. No data is sent externally. eta-calculator: title: ETA calculator - description: >- - An ETA (Estimated Time of Arrival) calculator to determine the approximate - end time of a task, for example, the end time and duration of a file - download. + description: An ETA (Estimated Time of Arrival) calculator to determine the + approximate end time of a task, for example, the end time and duration of + a file download. texts: label-milliseconds: milliseconds label-seconds: seconds @@ -467,7 +454,7 @@ tools: label-amount-of-element-to-consume: Amount of element to consume label-the-consumption-started-at: The consumption started at label-total-duration: Total duration - label-it-will-end: 'It will end ' + label-it-will-end: "It will end " tag-amount-of-unit-consumed-by-time-span: Amount of unit consumed by time span tag-in: in roman-numeral-converter: @@ -479,13 +466,12 @@ tools: text-arabic-number-copied-to-the-clipboard: Arabic number copied to the clipboard title-arabic-to-roman: Arabic to roman title-roman-to-arabic: Roman to arabic - tag-min-arabic-to-roman-value: '= MIN_ARABIC_TO_ROMAN && value' + tag-min-arabic-to-roman-value: = MIN_ARABIC_TO_ROMAN && value tag-copy: Copy hmac-generator: title: Hmac generator - description: >- - Computes a hash-based message authentication code (HMAC) using a secret - key and your favorite hashing function. + description: Computes a hash-based message authentication code (HMAC) using a + secret key and your favorite hashing function. texts: label-plain-text: Plain Text label-hexadecimal-text: Hexadecimal Text @@ -508,19 +494,18 @@ tools: tag-copy-hmac: Copy HMAC bip39-generator: title: BIP39 passphrase generator - description: >- - Generate a BIP39 passphrase from an existing or random mnemonic, or get - the mnemonic from the passphrase. + description: Generate a BIP39 passphrase from an existing or random mnemonic, or + get the mnemonic from the passphrase. texts: message-entropy-length-should-be-16-32-and-be-a-multiple-of-4: Entropy length should be >= 16, <= 32 and be a multiple of 4 message-entropy-should-be-an-hexadecimal-string: Entropy should be an hexadecimal string message-invalid-mnemonic: Invalid mnemonic text-entropy-copied-to-the-clipboard: Entropy copied to the clipboard text-passphrase-copied-to-the-clipboard: Passphrase copied to the clipboard - label-language: 'Language:' - label-entropy-seed: 'Entropy (seed):' + label-language: "Language:" + label-entropy-seed: "Entropy (seed):" placeholder-your-string: Your string... - label-passphrase-mnemonic: 'Passphrase (mnemonic):' + label-passphrase-mnemonic: "Passphrase (mnemonic):" placeholder-your-mnemonic: Your mnemonic... base64-file-converter: title: Base64 file converter @@ -540,11 +525,10 @@ tools: tag-preview-image: Preview image tag-download-file: Download file tag-copy: Copy - include-data-uri-prefix: 'Include data: URI prefix' + include-data-uri-prefix: "Include data: URI prefix" list-converter: title: List converter - description: >- - This tool can process column-based data and apply various changes + description: This tool can process column-based data and apply various changes (transpose, add prefix and suffix, reverse list, sort list, lowercase values, truncate values) to each row. texts: @@ -604,9 +588,9 @@ tools: placeholder-the-decoded-string-will-be-here: The decoded string will be here tag-copy-base64: Copy base64 tag-copy-decoded-string: Copy decoded string - text-encoding: 'Text Encoding:' + text-encoding: "Text Encoding:" label-utf-8: UTF-8 - label-utf-8-alias-utf8: 'UTF-8 (Alias: UTF8)' + label-utf-8-alias-utf8: "UTF-8 (Alias: UTF8)" label-utf-16le: UTF-16LE label-utf-16be: UTF-16BE label-utf-7: UTF-7 @@ -660,12 +644,11 @@ tools: output-label-yaml-from-your-toml: YAML from your TOML math-evaluator: title: Math evaluator - description: >- - A calculator for evaluating mathematical expressions. You can use + description: A calculator for evaluating mathematical expressions. You can use functions like sqrt, cos, sin, abs, etc. texts: - placeholder-your-math-expression-ex-2-sqrt-6: 'Your math expression (ex: 2*sqrt(6) )...' - title-result: 'Result ' + placeholder-your-math-expression-ex-2-sqrt-6: "Your math expression (ex: 2*sqrt(6) )..." + title-result: "Result " json-to-yaml-converter: title: JSON to YAML converter description: Simply convert JSON to YAML with this live online converter. @@ -676,9 +659,8 @@ tools: output-label-yaml-from-your-json: YAML from your JSON json-to-env: title: JSON to .env - description: >- - Convert a flat JSON object into a .env file. Keys are upper-cased and - values are safely quoted when they contain whitespace, quotes, or + description: Convert a flat JSON object into a .env file. Keys are upper-cased + and values are safely quoted when they contain whitespace, quotes, or env-special characters. texts: message-provided-json-is-not-a-valid-flat-object: Provided JSON is not a valid flat object. @@ -690,7 +672,7 @@ tools: description: Simply convert JSON to Javascript object with this live online converter. texts: message-provided-json-is-not-valid: Provided JSON is not valid. - label-indent-size: 'Indent size :' + label-indent-size: "Indent size :" input-label-your-json: Your JSON input-placeholder-paste-your-json-here: Paste your JSON here... output-label-javascript-object-from-your-json: JavaScript Object from your JSON @@ -699,16 +681,16 @@ tools: description: Simply convert Javascript object to JSON with this live online converter. texts: message-provided-js-object-is-not-valid: Provided JS Object is not valid. - label-indent-size: 'Indent size :' + label-indent-size: "Indent size :" input-label-your-javascript-object: Your JavaScript Object input-placeholder-paste-your-js-object-here: Paste your JS Object here... output-label-json-from-your-javascript-object: JSON from your JavaScript Object numeronym-generator: title: Numeronym generator - description: >- - A numeronym is a word where a number is used to form an abbreviation. For - example, "i18n" is a numeronym of "internationalization" where 18 stands - for the number of letters between the first i and the last n in the word. + description: A numeronym is a word where a number is used to form an + abbreviation. For example, "i18n" is a numeronym of "internationalization" + where 18 stands for the number of letters between the first i and the last + n in the word. texts: placeholder-enter-a-word-e-g-internationalization: Enter a word, e.g. 'internationalization' placeholder-your-numeronym-will-be-here-e-g-i18n: Your numeronym will be here, e.g. 'i18n' @@ -716,56 +698,54 @@ tools: title: Case converter description: Transform the case of a string and choose between different formats texts: - message-invalid-cleaning-regex-0: 'Invalid cleaning regex: {0}' - label-lowercase: 'Lowercase:' - label-uppercase: 'Uppercase:' - label-camelcase: 'Camelcase:' - label-capitalcase: 'Capitalcase:' - label-constantcase: 'Constantcase:' - label-dotcase: 'Dotcase:' - label-kebab-paramcase: 'Kebab/paramcase:' - label-nocase: 'Nocase:' - label-train-headercase: 'Train/headercase:' - label-pascalcase: 'Pascalcase:' - label-pathcase: 'Pathcase:' - label-sentencecase: 'Sentencecase:' - label-snakecase: 'Snakecase:' - label-mockingcase: 'Mockingcase:' - label-your-string: 'Your string:' + message-invalid-cleaning-regex-0: "Invalid cleaning regex: {0}" + label-lowercase: "Lowercase:" + label-uppercase: "Uppercase:" + label-camelcase: "Camelcase:" + label-capitalcase: "Capitalcase:" + label-constantcase: "Constantcase:" + label-dotcase: "Dotcase:" + label-kebab-paramcase: "Kebab/paramcase:" + label-nocase: "Nocase:" + label-train-headercase: "Train/headercase:" + label-pascalcase: "Pascalcase:" + label-pathcase: "Pathcase:" + label-sentencecase: "Sentencecase:" + label-snakecase: "Snakecase:" + label-mockingcase: "Mockingcase:" + label-your-string: "Your string:" placeholder-your-string: Your string... - label-cleaning-regex: 'Cleaning regex:' + label-cleaning-regex: "Cleaning regex:" placeholder-your-cleaning-regex: Your cleaning regex... - label-titlecase: 'Titlecase:' - label-spongecase: 'Spongecase:' - label-swapcase: 'Swapcase:' - label-lang-title-case: 'Language TitleCase:' - label-language: 'Language:' + label-titlecase: "Titlecase:" + label-spongecase: "Spongecase:" + label-swapcase: "Swapcase:" + label-lang-title-case: "Language TitleCase:" + label-language: "Language:" placeholder-your-language: Language Title casing language... html-entities: title: Escape HTML entities - description: >- - Escape or unescape HTML entities (replace characters like <,>, &, " and \' - with their HTML version) + description: Escape or unescape HTML entities (replace characters like <,>, &, " + and \' with their HTML version) texts: title-escape-html-entities: Escape HTML entities - label-your-string: 'Your string :' + label-your-string: "Your string :" placeholder-the-string-to-escape: The string to escape - label-your-string-escaped: 'Your string escaped :' + label-your-string-escaped: "Your string escaped :" placeholder-your-string-escaped: Your string escaped title-unescape-html-entities: Unescape HTML entities - label-your-escaped-string: 'Your escaped string :' + label-your-escaped-string: "Your escaped string :" placeholder-the-string-to-unescape: The string to unescape - label-your-string-unescaped: 'Your string unescaped :' + label-your-string-unescaped: "Your string unescaped :" placeholder-your-string-unescaped: Your string unescaped tag-it-tool: IT Tool tag-copy: Copy json-prettify: title: JSON prettify and format description: Prettify your JSON string into a friendly, human-readable format. - externalAccess: >- - This tool may download a JSON schema from https://www.schemastore.org (or - the configured schema catalog) when validation is requested. No data is - sent externally. + externalAccess: This tool may download a JSON schema from + https://www.schemastore.org (or the configured schema catalog) when + validation is requested. No data is sent externally. docker-run-to-docker-compose-converter: title: Docker run to Docker compose converter description: Transforms "docker run" commands into docker-compose files! @@ -773,12 +753,12 @@ tools: label-v2-2-x: V2 - 2.x label-v2-3-x: V2 - 3.x label-commonspec: CommonSpec - label-your-docker-run-command-s: 'Your docker run command(s):' + label-your-docker-run-command-s: "Your docker run command(s):" placeholder-your-docker-run-command-s-to-convert: Your docker run command(s) to convert... - label-eventually-paste-your-existing-docker-compose: 'Eventually, paste your existing Docker Compose:' - label-docker-compose-format: 'Docker Compose format:' + label-eventually-paste-your-existing-docker-compose: "Eventually, paste your existing Docker Compose:" + label-docker-compose-format: "Docker Compose format:" placeholder-select-docker-compose-format: Select Docker Compose format - label-indent-size: 'Indent size:' + label-indent-size: "Indent size:" title-the-following-errors-occured: The following errors occured tag-download-docker-compose-yml: Download docker-compose.yml mac-address-lookup: @@ -786,20 +766,20 @@ tools: description: Find the vendor and manufacturer of a device by its MAC address. texts: text-vendor-info-copied-to-the-clipboard: Vendor info copied to the clipboard - label-mac-address: 'MAC address:' + label-mac-address: "MAC address:" placeholder-type-a-mac-address: Type a MAC address - tag-vendor-info: 'Vendor info:' + tag-vendor-info: "Vendor info:" tag-unknown-vendor-for-this-address: Unknown vendor for this address tag-copy-vendor-info: Copy vendor info mime-types: title: MIME types description: Convert MIME types to file extensions and vice-versa. texts: - placeholder-select-your-mimetype-here-ex-application-pdf: 'Select your mimetype here... (ex: application/pdf)' + placeholder-select-your-mimetype-here-ex-application-pdf: "Select your mimetype here... (ex: application/pdf)" tag-mime-type-to-extension: Mime type to extension tag-know-which-file-extensions-are-associated-to-a-mime-type: Know which file extensions are associated to a mime-type tag-extensions-of-files-with-the: Extensions of files with the - tag-mime-type: 'mime-type:' + tag-mime-type: "mime-type:" tag-file-extension-to-mime-type: File extension to mime type tag-know-which-mime-type-is-associated-to-a-file-extension: Know which mime type is associated to a file extension tag-mime-type-associated-to-the-extension: Mime type associated to the extension @@ -815,12 +795,12 @@ tools: output-label-json-from-your-toml: JSON from your TOML lorem-ipsum-generator: title: Lorem ipsum generator - description: >- - Lorem ipsum is a placeholder text commonly used to demonstrate the visual - form of a document or a typeface without relying on meaningful content + description: Lorem ipsum is a placeholder text commonly used to demonstrate the + visual form of a document or a typeface without relying on meaningful + content texts: text-lorem-ipsum-copied-to-the-clipboard: Lorem ipsum copied to the clipboard - label-language: 'Language:' + label-language: "Language:" label-paragraphs: Paragraphs label-sentences-per-paragraph: Sentences per paragraph label-words-per-sentence: Words per sentence @@ -832,13 +812,12 @@ tools: tag-print-ie-use-a-pdf-printer-to-get-a-pdf-file: Print (ie, use a PDF Printer to get a PDF file) qrcode-generator: title: QR Code generator - description: >- - Generate and download a QR code for a URL (or just plain text), and + description: Generate and download a QR code for a URL (or just plain text), and customize the background and foreground colors. - error-resistance: 'Error resistance:' - background-color: 'Background color:' - foreground-color: 'Foreground color:' - text: 'Text:' + error-resistance: "Error resistance:" + background-color: "Background color:" + foreground-color: "Foreground color:" + text: "Text:" placeholder: Your link or text... button: download: Download QR code @@ -850,8 +829,8 @@ tools: description: Prettify your XML string into a friendly, human-readable format. texts: message-provided-xml-is-not-valid: Provided XML is not valid. - label-collapse-content: 'Collapse content:' - label-indent-size: 'Indent size:' + label-collapse-content: "Collapse content:" + label-indent-size: "Indent size:" input-label-your-xml: Your XML input-placeholder-paste-your-xml-here: Paste your XML here... output-label-formatted-xml-from-your-xml: Formatted XML from your XML @@ -859,9 +838,8 @@ tools: tag-bar: bar temperature-converter: title: Temperature converter - description: >- - Degrees temperature conversions for Kelvin, Celsius, Fahrenheit, Rankine, - Delisle, Newton, Réaumur, and Rømer. + description: Degrees temperature conversions for Kelvin, Celsius, Fahrenheit, + Rankine, Delisle, Newton, Réaumur, and Rømer. rsa-key-pair-generator: title: RSA key pair generator description: Generate a new random RSA private and public pem certificate key pair. @@ -873,14 +851,14 @@ tools: label-openssh-new: OpenSSH New label-putty: PuTTY message-bits-should-be-256-bits-16384-and-be-a-multiple-of-8: Bits should be 256 <= bits <= 16384 and be a multiple of 8 - label-format: 'Format:' + label-format: "Format:" placeholder-select-a-key-format: Select a key format - label-bits: 'Bits :' - label-passphrase: 'Passphrase :' + label-bits: "Bits :" + label-passphrase: "Passphrase :" placeholder-passphrase: Passphrase - label-comment: 'Comment :' + label-comment: "Comment :" placeholder-comment: Comment - tag-256-value: '= 256 && value' + tag-256-value: = 256 && value tag-refresh-key-pair: Refresh key-pair tag-public-key: Public key tag-private-key: Private key @@ -890,17 +868,16 @@ tools: bits-should-be-256-less-than-bits-less-than-16384-and-be-a-multiple-of-8: Bits should be 256 <= bits <= 16384 and be a multiple of 8 html-wysiwyg-editor: title: HTML WYSIWYG editor - description: >- - Online, feature-rich WYSIWYG HTML editor which generates the source code - of the content immediately. + description: Online, feature-rich WYSIWYG HTML editor which generates the source + code of the content immediately. texts: placeholder-your-html-content: Your HTML content... - label-your-html-to-convert-can-paste-from-clipboard: 'Your HTML to convert (can paste from clipboard):' - label-minify: 'Minify:' + label-your-html-to-convert-can-paste-from-clipboard: "Your HTML to convert (can paste from clipboard):" + label-minify: "Minify:" tag-hey: Hey! tag-welcome-to-this-html-wysiwyg-editor: Welcome to this HTML wysiwyg editor tag-click-here-to-paste-or-edit-raw-html: Click here to paste or edit raw html - label-xhtmlfy: 'XHtml:' + label-xhtmlfy: "XHtml:" yaml-to-toml: title: YAML to TOML description: Parse and convert YAML to TOML. @@ -923,9 +900,8 @@ tools: description: Convert date and time into the various different formats ipv4-subnet-calculator: title: IPv4 subnet calculator - description: >- - Parse your IPv4 CIDR blocks and get all the info you need about your - subnet. + description: Parse your IPv4 CIDR blocks and get all the info you need about + your subnet. texts: message-we-cannot-parse-this-address-check-the-format: We cannot parse this address, check the format label-netmask: Netmask @@ -955,28 +931,26 @@ tools: description: Generate open-graph and socials HTML meta tags for your website. ipv6-ula-generator: title: IPv6 ULA generator - description: >- - Generate your own local, non-routable IP addresses for your network + description: Generate your own local, non-routable IP addresses for your network according to RFC4193. texts: - label-ipv6-ula: 'IPv6 ULA:' - label-first-routable-block: 'First routable block:' - label-last-routable-block: 'Last routable block:' + label-ipv6-ula: "IPv6 ULA:" + label-first-routable-block: "First routable block:" + label-last-routable-block: "Last routable block:" title-info: Info placeholder-type-a-mac-address: Type a MAC address - label-mac-address: 'MAC address:' + label-mac-address: "MAC address:" hash-text: title: Hash text - description: >- - Hash a text string using the function you need : MD5, SHA1, SHA256, - SHA224, SHA512, SHA384, SHA3 or RIPEMD160 + description: "Hash a text string using the function you need : MD5, SHA1, + SHA256, SHA224, SHA512, SHA384, SHA3 or RIPEMD160" texts: label-binary-base-2: Binary (base 2) label-hexadecimal-base-16: Hexadecimal (base 16) label-base64-base-64: Base64 (base 64) label-base64url-base-64-with-url-safe-chars: Base64url (base 64 with url safe chars) placeholder-your-string-to-hash: Your string to hash... - label-your-text-to-hash: 'Your text to hash:' + label-your-text-to-hash: "Your text to hash:" label-digest-encoding: Digest encoding tag-argon2d: Argon2d tag-argon2i: Argon2i @@ -1000,9 +974,8 @@ tools: output-label-ts-from-your-json: TS from your JSON device-information: title: Device information - description: >- - Get information about your current device (screen size, pixel-ratio, user - agent, ...) + description: Get information about your current device (screen size, + pixel-ratio, user agent, ...) texts: label-screen-size: Screen size label-orientation: Orientation @@ -1019,10 +992,9 @@ tools: tag-unknown: unknown pdf-signature-checker: title: PDF signature checker - description: >- - Verify the signatures of a PDF file. A signed PDF file contains one or - more signatures that may be used to determine whether the contents of the - file have been altered since the file was signed. + description: Verify the signatures of a PDF file. A signed PDF file contains one + or more signatures that may be used to determine whether the contents of + the file have been altered since the file was signed. texts: title-drag-and-drop-a-pdf-file-here-or-click-to-select-a-file: Drag and drop a PDF file here, or click to select a file tag-no-signatures-found-in-the-provided-file: No signatures found in the provided file. @@ -1031,7 +1003,7 @@ tools: description: Sort your JSON by keys and values. texts: message-provided-json-is-not-valid: Provided JSON is not valid. - label-key-name: 'Key Name:' + label-key-name: "Key Name:" label-key-value: Key Value label-key-name-descending: Key Name (Descending) label-key-value-descending: Key Value (Descending) @@ -1049,9 +1021,8 @@ tools: output-label-minified-version-of-your-json: Minified version of your JSON json-string-converter: title: Json string converter - description: >- - Convert your text or JavaScript objects to JSON string format and vice - versa. + description: Convert your text or JavaScript objects to JSON string format and + vice versa. texts: message-provided-text-is-not-valid-make-sure-your-json-is-in-double-quotes: Provided text is not valid. (Make sure your JSON is in double quotes) label-json-stringify: JSON Stringify @@ -1062,38 +1033,34 @@ tools: output-label-json-string-conversion-of-your-input: JSON string conversion of your input ulid-generator: title: ULID generator - description: >- - Generate random Universally Unique Lexicographically Sortable Identifier - (ULID). + description: Generate random Universally Unique Lexicographically Sortable + Identifier (ULID). texts: label-raw: Raw label-json: JSON text-ulids-copied-to-the-clipboard: ULIDs copied to the clipboard - label-format: 'Format: ' - tag-quantity: 'Quantity:' + label-format: "Format: " + tag-quantity: "Quantity:" tag-refresh: Refresh tag-copy: Copy string-obfuscator: title: String obfuscator - description: >- - Obfuscate a string (like a secret, an IBAN, or a token) to make it + description: Obfuscate a string (like a secret, an IBAN, or a token) to make it shareable and identifiable without revealing its content. texts: placeholder-enter-string-to-obfuscate: Enter string to obfuscate - label-string-to-obfuscate: 'String to obfuscate:' - tag-keep-first: 'Keep first:' - tag-keep-last: 'Keep last:' - tag-keep-nbsp-spaces: 'Keep spaces:' + label-string-to-obfuscate: "String to obfuscate:" + tag-keep-first: "Keep first:" + tag-keep-last: "Keep last:" + tag-keep-nbsp-spaces: "Keep spaces:" base-converter: title: Integer base converter - description: >- - Convert a number between different bases (decimal, hexadecimal, binary, - octal, base64, ...) + description: Convert a number between different bases (decimal, hexadecimal, + binary, octal, base64, ...) floating-point-converter: title: Floating point number converter - description: >- - Convert a decimal number to a IEEE 754 binary floating point number or - vice versa. + description: Convert a decimal number to a IEEE 754 binary floating point number + or vice versa. yaml-to-json-converter: title: YAML to JSON converter description: Simply convert YAML to JSON with this online live converter. @@ -1105,8 +1072,7 @@ tools: label-nestify-a-b-c-to-nested-objects: Nestify ('a.b.c' to nested objects) uuid-generator: title: UUIDs generator - description: >- - A Universally Unique Identifier (UUID) is a 128-bit number used to + description: A Universally Unique Identifier (UUID) is a 128-bit number used to identify information in computer systems. The number of possible UUIDs is 16^32, which is 2^128 or about 3.4x10^38 (which is a lot!). texts: @@ -1145,30 +1111,28 @@ tools: placeholder-your-uuids: Your uuids ipv4-address-converter: title: IPv4 address converter - description: >- - Convert an IP address into decimal, binary, hexadecimal, or even an IPv6 - representation of it. + description: Convert an IP address into decimal, binary, hexadecimal, or even an + IPv6 representation of it. texts: - label-decimal: 'Decimal: ' - label-hexadecimal: 'Hexadecimal: ' - label-binary: 'Binary: ' - label-ipv6: 'Ipv6: ' - label-ipv6-short: 'Ipv6 (short): ' - label-ipv6-decimal: 'Ipv6 (decimal): ' + label-decimal: "Decimal: " + label-hexadecimal: "Hexadecimal: " + label-binary: "Binary: " + label-ipv6: "Ipv6: " + label-ipv6-short: "Ipv6 (short): " + label-ipv6-decimal: "Ipv6 (decimal): " label-6to4-prefix: 6to4 prefix label-cidr-notation: CIDR notation label-arpa: ARPA label-ip-class: IP class label-type: Type message-invalid-ipv4-address: Invalid ipv4 address - label-the-ipv4-address: 'The ipv4 address:' + label-the-ipv4-address: "The ipv4 address:" placeholder-the-ipv4-address: The ipv4 address... placeholder-set-a-correct-ipv4-address: Set a correct ipv4 address text-statistics: title: Text statistics - description: >- - Get information about a text, the number of characters, the number of - words, its size in bytes, ... + description: Get information about a text, the number of characters, the number + of words, its size in bytes, ... characters: Character count words: Word count lines: Line count @@ -1229,9 +1193,8 @@ tools: tag-copy-text-to-clipboard: Copy text to clipboard ipv4-range-expander: title: IPv4 range expander - description: >- - Given a start and an end IPv4 address, this tool calculates a valid IPv4 - subnet along with its CIDR notation. + description: Given a start and an end IPv4 address, this tool calculates a valid + IPv4 subnet along with its CIDR notation. texts: label-start-address: Start address label-end-address: End address @@ -1241,7 +1204,7 @@ tools: placeholder-start-ipv4-address: Start IPv4 address... placeholder-end-ipv4-address: End IPv4 address... title-invalid-combination-of-start-and-end-ipv4-address: Invalid combination of start and end IPv4 address - tag-nbsp: ' ' + tag-nbsp: " " tag-old-value: old value tag-new-value: new value tag-switch-start-and-end-ipv4-address: Switch start and end IPv4 address @@ -1254,14 +1217,12 @@ tools: tag-ignore-whitespaces: Ignore Trailing Whitespaces? otp-generator: title: OTP code generator - description: >- - Generate and validate time-based and event-based OTP (one time password) - for multi-factor authentication. + description: Generate and validate time-based and event-based OTP (one time + password) for multi-factor authentication. url-encoder: title: Encode/decode url formatted strings - description: >- - Encode to url-encoded format (also known as "percent-encoded") or decode - from it. + description: Encode to url-encoded format (also known as "percent-encoded") or + decode from it. texts: label-uricomponent: URIComponent label-rfc3986-uricomponent: RFC3986 - URIComponent @@ -1272,22 +1233,21 @@ tools: text-encoded-string-copied-to-the-clipboard: Encoded string copied to the clipboard text-decoded-string-copied-to-the-clipboard: Decoded string copied to the clipboard title-encode: Encode - label-encoding-kind: 'Encoding Kind:' - label-your-string: 'Your string :' + label-encoding-kind: "Encoding Kind:" + label-your-string: "Your string :" placeholder-the-string-to-encode: The string to encode - label-your-string-encoded: 'Your string encoded :' + label-your-string-encoded: "Your string encoded :" placeholder-your-string-encoded: Your string encoded title-decode: Decode - label-your-encoded-string: 'Your encoded string :' + label-your-encoded-string: "Your encoded string :" placeholder-the-string-to-decode: The string to decode - label-your-string-decoded: 'Your string decoded :' + label-your-string-decoded: "Your string decoded :" placeholder-your-string-decoded: Your string decoded tag-copy: Copy image-resizer: title: Image resizer - description: >- - Change the width and height of the image, preview and download it in the - desired format. + description: Change the width and height of the image, preview and download it + in the desired format. texts: label-custom: Custom label-original: Original @@ -1308,17 +1268,17 @@ tools: placeholder-h: H tag-reset-width-and-height-to-image-dimensions: Reset width and height to image dimensions tag-dimensions: Dimensions - tag-width-px: 'Width (px):' - tag-height-px: 'Height (px):' + tag-width-px: "Width (px):" + tag-height-px: "Height (px):" tag-️-width-and-height-must-be-greater-than-0: ⚠️ Width and height must be greater than 0 tag-aspect-ratio: Aspect Ratio tag-aspect-ratio-presets: Aspect Ratio Presets tag-apply: Apply - tag-: ':' - tag-preview-is-disabled-when-width-or-height-exceeds-7-680-pixels-for-performance-reasons: >- + tag-: ":" + tag-preview-is-disabled-when-width-or-height-exceeds-7-680-pixels-for-performance-reasons: Preview is disabled when width or height exceeds 7,680 pixels for performance reasons. - tag-download-options: 'Download Options:' + tag-download-options: "Download Options:" tag-download-jpg: Download JPG tag-download-png: Download PNG tag-download-webp: Download WebP @@ -1335,9 +1295,8 @@ tools: description: Unicode Characters to Java Entities Converter and vice-versa uuid-converter: title: UUID converter - description: >- - Converts a UUID with and without a hyphen to other common SQL notations - and back. + description: Converts a UUID with and without a hyphen to other common SQL + notations and back. uuid: UUID uuidhexupper: HEX notation (upper) uuidhexlower: HEX notation (lower) @@ -1424,11 +1383,11 @@ tools: title-api-calling: API Calling label-base-api-url: Base API Url placeholder-base-api-url: Base API Url - label-http-method: 'HTTP Method:' + label-http-method: "HTTP Method:" title-headers: Headers placeholder-header-name: Header Name placeholder-value: Value - label-content-type: 'Content-Type:' + label-content-type: "Content-Type:" title-query-parameters: Query Parameters placeholder-param-name: Param Name label-body: Body @@ -1482,7 +1441,7 @@ tools: tag-pixels-width: Pixels width tag-pixels-height: Pixels height tag-ratio-width: Ratio width - tag-: ':' + tag-: ":" tag-ratio-height: Ratio height tag-calculate: Calculate tag-clear-ratio: Clear Ratio @@ -1491,15 +1450,15 @@ tools: title: Barcode generator description: Barcode generator texts: - label-text: 'Text:' + label-text: "Text:" placeholder-your-barcode: Your barcode... - label-format: 'Format:' - label-foreground-color: 'Foreground color:' - label-background-color: 'Background color:' - label-scale: 'Scale:' - label-height-mm: 'Height (mm):' - label-margin: 'Margin:' - label-display-text: 'Display text:' + label-format: "Format:" + label-foreground-color: "Foreground color:" + label-background-color: "Background color:" + label-scale: "Scale:" + label-height-mm: "Height (mm):" + label-margin: "Margin:" + label-display-text: "Display text:" tag-download-png-barcode: Download PNG barcode tag-download-svg-barcode: Download SVG barcode barcode-reader: @@ -1564,17 +1523,16 @@ tools: description: Generate a deck of playing cards texts: text-cards-picked-copied-to-the-clipboard: Cards Picked copied to the clipboard - label-number-of-cards: 'Number of cards:' + label-number-of-cards: "Number of cards:" placeholder-number-of-cards-to-pick: Number of cards to pick - label-number-of-packs: 'Number of packs:' + label-number-of-packs: "Number of packs:" placeholder-number-of-card-packs-to-pick-in: Number of card packs to pick in tag-use-jokers: Use Jokers tag-copy-deck: Copy deck tag-refresh-deck: Refresh deck cidr-in-cidr: title: IPv4-6/IPRange/CIDR in IPRange/CIDR/IPMask - description: >- - Given a CIDR/IP Range/Wildcard IP/IP Mask, tell if a given + description: Given a CIDR/IP Range/Wildcard IP/IP Mask, tell if a given IPv4-6/Range/CIDR/Wildcard IP/IP Mask is in subnet range texts: message-we-cannot-parse-this-cidr-ip-range-mask-wildcard-check-the-format: We cannot parse this CIDR/IP Range/Mask/Wildcard, check the format @@ -1591,10 +1549,10 @@ tools: texts: label-language: Language label-theme: Theme - label-code-snippet-to-format: 'Code snippet to format:' + label-code-snippet-to-format: "Code snippet to format:" placeholder-put-your-code-snippet-here: Put your code snippet here label-show-line-numbers: Show line numbers - tag-: ''', ''' + tag-: "', '" tag-copy-html-formatted: Copy HTML Formatted tag-copy-code-text: Copy Code Text tag-copy-html-word: Copy to HTML/Rich text in Word @@ -1612,20 +1570,20 @@ tools: text-good: Good text-very-good: Very good text-super: Super - label-forecolor: 'Forecolor:' - label-backcolor: 'Backcolor:' + label-forecolor: "Forecolor:" + label-backcolor: "Backcolor:" title-wcag-2-1: WCAG 2.1 - label-wcag-constrast: 'WCAG Contrast:' - label-contrast-quality: 'Contrast quality:' - label-small-texts: 'Small texts:' - label-large-texts: 'Large texts:' + label-wcag-constrast: "WCAG Contrast:" + label-contrast-quality: "Contrast quality:" + label-small-texts: "Small texts:" + label-large-texts: "Large texts:" title-normal-text: Normal text - label-wcag-2-1-aa: 'WCAG 2.1 AA:' - label-wcag-2-1-aaa: 'WCAG 2.1 AAA:' + label-wcag-2-1-aa: "WCAG 2.1 AA:" + label-wcag-2-1-aaa: "WCAG 2.1 AAA:" title-large-text: Large text title-apca: APCA - label-apca-constrast: 'APCA Contrast:' - tag-text-that-is-14pt-18-67px-and-bold-or-any-text-bigger-than-18pt-24px-is-defined-as-large-scale-text: >- + label-apca-constrast: "APCA Contrast:" + tag-text-that-is-14pt-18-67px-and-bold-or-any-text-bigger-than-18pt-24px-is-defined-as-large-scale-text: Text that is 14pt (18.67px) and bold or any text bigger than 18pt (24px) is defined as large scale text. color-wheel: @@ -1665,10 +1623,9 @@ tools: tag-stop: Stop crc-calculator: title: CRC calculator - description: >- - Compute text or file CRC (CRC1, CRC8, CRC8 1-Wire, CRC8 DVB-S2, CRC16, - CRC16 CCITT, CRC16 Modbus, CRC16 Kermit, CRC16 XModem, CRC24, CRC32, CRC32 - MPEG-2, CRCJAM) + description: Compute text or file CRC (CRC1, CRC8, CRC8 1-Wire, CRC8 DVB-S2, + CRC16, CRC16 CCITT, CRC16 Modbus, CRC16 Kermit, CRC16 XModem, CRC24, + CRC32, CRC32 MPEG-2, CRCJAM) texts: label-binary-base-2: Binary (base 2) label-hexadecimal-base-16: Hexadecimal (base 16) @@ -1676,7 +1633,7 @@ tools: label-base64url-base-64-with-url-safe-chars: Base64url (base 64 with url safe chars) title-drag-and-drop-a-file-here-or-click-to-select-a-file: Drag and drop a file here, or click to select a file placeholder-paste-string-to-crc: Paste string to CRC... - label-your-text-to-crc: 'Your text to CRC:' + label-your-text-to-crc: "Your text to CRC:" label-digest-encoding: Digest encoding tag-or: OR tag-an-error-occured-hashing-file: An error occured hashing file. @@ -1685,37 +1642,37 @@ tools: description: Certificate Signing Request generator (PEM format) texts: message-common-name-domain-name-must-not-be-empty: Common Name/Domain Name must not be empty - label-common-name-domain-name: 'Common Name/Domain Name:' + label-common-name-domain-name: "Common Name/Domain Name:" placeholder-common-domain-name: Common/Domain Name - label-organization-name: 'Organization Name:' + label-organization-name: "Organization Name:" placeholder-organization-name: Organization Name - label-organization-unit: 'Organization Unit:' + label-organization-unit: "Organization Unit:" placeholder-organization-unit: Organization Unit - label-state: 'State:' + label-state: "State:" placeholder-state: State - label-city: 'City:' + label-city: "City:" placeholder-city: City - label-country: 'Country:' + label-country: "Country:" placeholder-country: Country - label-contact-email: 'Contact Email:' + label-contact-email: "Contact Email:" placeholder-contact-email: Contact Email - label-subject-alternative-names: 'Subject Alternative Names:' + label-subject-alternative-names: "Subject Alternative Names:" placeholder-dns-names-emails-ip-uri: DNS Names, emails, IP, URI... - label-private-key-passphrase: 'Private Key passphrase:' + label-private-key-passphrase: "Private Key passphrase:" placeholder-passphrase: Passphrase tag-refresh-csr: Refresh CSR tag-certificate-signing-request: Certificate Signing Request tag-public-key: Public key tag-private-key: Private key - label-rsa-bits: 'RSA Bits:' + label-rsa-bits: "RSA Bits:" bits-should-be-256-less-than-bits-less-than-16384-and-be-a-multiple-of-8: Bits should be 256 <= bits <= 16384 and be a multiple of 8 css-prettifier: title: Css prettifier description: CSS Prettify texts: placeholder-your-css-content: Your CSS content... - label-your-css-to-format-can-paste-from-clipboard: 'Your CSS to format (can paste from clipboard):' - label-output-prettified-css: 'Output prettified CSS:' + label-your-css-to-format-can-paste-from-clipboard: "Your CSS to format (can paste from clipboard):" + label-output-prettified-css: "Output prettified CSS:" css-selectors-memo: title: CSS Selectors Cheatsheet description: CSS Selectors Syntax Cheatsheet @@ -1738,32 +1695,29 @@ tools: description: Generate common coding languages version of provided curl command line texts: placeholder-your-curl-command: Your curl command - label-language: 'Language:' - label-curl-language-equivalent: 'Curl language equivalent:' - label-warnings: 'Warnings:' + label-language: "Language:" + label-curl-language-equivalent: "Curl language equivalent:" + label-warnings: "Warnings:" currency-converter: title: Currency Converter description: Convert currency values using https://github.com/fawazahmed0/exchange-api texts: title-currency-converter: Currency Converter label-from: From - label-amount: 'Amount:' - label-for-date: 'For Date:' + label-amount: "Amount:" + label-for-date: "For Date:" title-converted-currencies: Converted currencies placeholder-please-select-a-currency: Please select a currency title-country-to-currencies: Country to Currencies label-country: Country title-currencies-to-countries: Currencies to Countries label-currency: Currency - externalAccess: >- - This tool downloads fresh currency data from + externalAccess: This tool downloads fresh currency data from https://cdn.jsdelivr.net/npm/{'@'}fawazahmed0/currency-api (or the configured mirror) data-storage-unit-converter: title: Data Storage Unit converter - description: >- - Convert data storage or transfer units (bytes, bibytes, bits, - kilobytes...) + description: Convert data storage or transfer units (bytes, bibytes, bits, kilobytes...) texts: label-bytes-b: Bytes (B) label-bits-bit: Bits (bit) @@ -1792,12 +1746,12 @@ tools: label-yottabytes-yb: Yottabytes (YB) label-yottabits-ybit: Yottabits (Ybit) label-yobibytes-yib: Yobibytes (YiB) - label-input-size: 'Input Size:' - placeholder-put-your-number-here-ex-1024: 'Put your number here (ex: 1024)' + label-input-size: "Input Size:" + placeholder-put-your-number-here-ex-1024: "Put your number here (ex: 1024)" placeholder-select-input-unit: Select input unit - label-output: 'Output:' + label-output: "Output:" placeholder-select-output-unit: Select output unit - label-precision: 'Precision:' + label-precision: "Precision:" placeholder-precision: Precision... label-output-value: Output value placeholder-output-value-will-be-here: Output value will be here... @@ -1836,23 +1790,23 @@ tools: label-zettabits-zbit: Zettabits (Zbit) label-yottabits-ybit: Yottabits (Ybit) title-transfer-time: Transfer Time - label-data-size: 'Data Size:' + label-data-size: "Data Size:" placeholder-data-size: Data Size... placeholder-select-a-storage-unit: Select a storage unit - label-bit-rate: 'Bit Rate:' + label-bit-rate: "Bit Rate:" placeholder-bit-rate: Bit Rate... placeholder-select-a-bit-rate-unit: Select a bit rate unit label-transfer-time: Transfer time placeholder-transfer-time-will-be-here: Transfer time will be here... title-transfer-bit-rate-speed: Transfer Bit Rate/Speed - label-duration-h-m-s: 'Duration (h/m/s):' + label-duration-h-m-s: "Duration (h/m/s):" placeholder-hours: Hours placeholder-minutes: Minutes placeholder-seconds: Seconds - label-transfer-bit-rate-speed: 'Transfer Bit Rate/Speed:' + label-transfer-bit-rate-speed: "Transfer Bit Rate/Speed:" placeholder-bit-rate-will-be-here: Bit Rate will be here... title-amount-transferable: Amount Transferable - label-amount-transferable: 'Amount transferable:' + label-amount-transferable: "Amount transferable:" placeholder-amount-transferable-will-be-here: Amount transferable will be here... tag-1mib-1024kib-1mb-1000kb-1gib-1024mib-1gb-1000mb: 1MiB = 1024KiB ; 1MB = 1000kB ; 1GiB = 1024MiB ; 1GB = 1000MB ; tag-see-here-for-details: see here for details @@ -1861,28 +1815,30 @@ tools: description: Add/substract durations from a specific date texts: title-date-duration-calculator: Date + Duration Calculator - label-reference-date: 'Reference Date:' + label-reference-date: "Reference Date:" label-duration-s: Duration(s) placeholder-please-enter-duration-one-per-line-with-optional-sign: Please enter duration, one per line with optional sign title-lines-errors: Lines errors - label-result-date: 'Result Date:' - label-result-iso-date: 'Result ISO Date:' - label-duration-seconds: 'Duration (seconds):' - label-duration: 'Duration:' - tag-supports-comment-line-hh-mm-ss-fff-3d-1h-3s-p4dt12h20m20-3s: 'Supports: comment (# line), HH:MM:SS.FFF, 3d 1h 3s..., P4DT12H20M20.3S..' + label-result-date: "Result Date:" + label-result-iso-date: "Result ISO Date:" + label-duration-seconds: "Duration (seconds):" + label-duration: "Duration:" + tag-supports-comment-line-hh-mm-ss-fff-3d-1h-3s-p4dt12h20m20-3s: + "Supports: comment (# line), HH:MM:SS.FFF, 3d 1h 3s..., + P4DT12H20M20.3S.." days-calculator: title: Days Calculator description: Calculate days interval, holidays, difference, business times texts: title-dates-interval: Dates Interval - label-date-range: 'Date Range:' - label-country: 'Country:' - label-state: 'State:' + label-date-range: "Date Range:" + label-country: "Country:" + label-state: "State:" placeholder-select-a-specific-state-or-let-empty-for-general-info: Select a specific state or let empty for general info - label-region: 'Region:' - label-timezone: 'Timezone:' - label-business-start-hour: 'Business Start Hour:' - label-business-end-hour: 'Business End Hour:' + label-region: "Region:" + label-timezone: "Timezone:" + label-business-start-hour: "Business Start Hour:" + label-business-end-hour: "Business End Hour:" title-weekdays: Weekdays label-monday: Monday label-tuesday: Tuesday @@ -1905,7 +1861,7 @@ tools: label-total-difference-years: Total Difference Years label-total-difference: Total Difference label-difference-seconds: Difference Seconds - label-difference: 'Difference ' + label-difference: "Difference " label-business-seconds: Business Seconds label-business-time: Business Time label-business-hours: Business Hours @@ -1928,15 +1884,15 @@ tools: description: RPG Dice Roller using Dice Notation texts: text-dice-roll-copied-to-the-clipboard: Dice Roll copied to the clipboard - label-dice-roll-notations: 'Dice Roll Notations:' + label-dice-roll-notations: "Dice Roll Notations:" placeholder-dice-configuration: Dice configuration title-roll-result: Roll Result label-total: Total - placeholder-dice-roll-total: 'Dice Roll total:' + placeholder-dice-roll-total: "Dice Roll total:" title-dice-notation-stats: Dice Notation Stats - label-min-total: 'Min Total:' - label-max-total: 'Max Total:' - label-avg-total: 'Avg Total:' + label-min-total: "Min Total:" + label-max-total: "Max Total:" + label-avg-total: "Avg Total:" tag-for-more-information-about-dice-notation-see: For more information about Dice Notation, see tag-here: here tag-copy-roll-result: Copy roll result @@ -1953,14 +1909,14 @@ tools: placeholder-put-your-eml-email-content-here: Put your eml/email content here... title-output: Output label-file-name: File Name - label-orgname: 'OrgName:' - label-email: 'Email:' - label-extracontactinfo: 'extraContactInfo:' - label-reportid: 'reportId:' - label-date-begin: 'Date Begin:' - label-date-end: 'Date End:' - label-domain: 'Domain:' - title-policy-published: 'Policy Published:' + label-orgname: "OrgName:" + label-email: "Email:" + label-extracontactinfo: "extraContactInfo:" + label-reportid: "reportId:" + label-date-begin: "Date Begin:" + label-date-end: "Date End:" + label-domain: "Domain:" + title-policy-published: "Policy Published:" title-failures: Failures tag-source-ip: Source IP tag-email-volume: Email Volume @@ -1974,28 +1930,27 @@ tools: texts: label-name: Name placeholder-name-to-query: Name to query - label-dns-record-type: 'DNS record type:' + label-dns-record-type: "DNS record type:" title-query-results: Query results tag-send-dns-query: Send DNS query - externalAccess: >- - This tool send DNS query throught a responding DOH endpoint in the - following list: https://martinheidegger.github.io/dns-query/resolvers.json + externalAccess: "This tool send DNS query throught a responding DOH endpoint in + the following list: + https://martinheidegger.github.io/dns-query/resolvers.json" docker-compose-converter: title: Docker Compose Format Converter - description: >- - Convert Docker Compose file between V1, 2.x, 3.x or CommonSpec and may - expand ports/volumes syntaxes + description: Convert Docker Compose file between V1, 2.x, 3.x or CommonSpec and + may expand ports/volumes syntaxes texts: label-v1-to-v2-2-x: V1 to V2 2.x label-v1-to-v2-3-x: V1 to V2 3.x label-v2-2-x-to-3-x: V2 - 2.x to 3.x label-v2-3-x-to-2-x: V2 - 3.x to 2.x label-to-commonspec: To CommonSpec - label-paste-your-existing-docker-compose: 'Paste your existing Docker Compose:' + label-paste-your-existing-docker-compose: "Paste your existing Docker Compose:" title-the-following-errors-occured: The following errors occured - label-docker-compose-conversion: 'Docker Compose conversion:' + label-docker-compose-conversion: "Docker Compose conversion:" placeholder-select-docker-compose-conversion: Select Docker Compose conversion - label-indent-size: 'Indent size:' + label-indent-size: "Indent size:" tag-expand-ports: Expand Ports tag-expand-volumes: Expand Volumes tag-download-converted-docker-compose-yml: Download converted docker-compose.yml @@ -2003,24 +1958,24 @@ tools: title: Docker Compose to Docker run converter description: Turns Docker Compose filt to docker run command(s)! texts: - label-paste-your-docker-compose-file-content: 'Paste your Docker Compose file content:' + label-paste-your-docker-compose-file-content: "Paste your Docker Compose file content:" title-the-following-errors-occured: The following errors occured tag-detach-d: Detach (-d) tag-remove-rm: Remove (--rm) tag-long-arguments: Long Arguments tag-multiline: Multiline - tag-equal-sep: '--arg=value' + tag-equal-sep: --arg=value docker-compose-to-kubernetes: title: Docker compose to kubernetes description: Docker Compose to Kubernetes manifests texts: - label-paste-your-docker-compose-file-content: 'Paste your Docker Compose file content:' + label-paste-your-docker-compose-file-content: "Paste your Docker Compose file content:" title-the-following-errors-occured: The following errors occured docker-compose-validator: title: Docker Compose Validator description: Validate Docker Compose files against CommonSpec schema texts: - label-paste-your-docker-compose-file-content: 'Paste your Docker Compose file content:' + label-paste-your-docker-compose-file-content: "Paste your Docker Compose file content:" title-the-following-errors-occured: The following errors occured tag-see-docker-compose-help: See Docker Compose help tag-: ) @@ -2032,19 +1987,19 @@ tools: title: Docker run to kubernetes description: Docker run command(s) to Kubernetes manifests texts: - label-your-docker-run-command-s: 'Your docker run command(s):' + label-your-docker-run-command-s: "Your docker run command(s):" placeholder-your-docker-run-command-s-to-convert: Your docker run command(s) to convert... title-the-following-errors-occured: The following errors occured duplicate-line-finder: title: Duplicate Lines Finder description: Find and list duplicated lines texts: - message-invalid-regex-0: 'Invalid regex: {0}' + message-invalid-regex-0: "Invalid regex: {0}" placeholder-your-string-to-list-duplicated-lines: Your string to list duplicated lines... - label-your-text: 'Your text: ' + label-your-text: "Your text: " placeholder-your-cleaning-regex: Your cleaning regex... - label-cleaning-regex: 'Cleaning regex: ' - label-duplicated-lines: 'Duplicated lines:' + label-cleaning-regex: "Cleaning regex: " + label-duplicated-lines: "Duplicated lines:" duration-calculator: title: Duration Calculator description: Calculate/parse durations @@ -2066,11 +2021,12 @@ tools: label-weeks: Weeks label-years: Years title-lines-errors: Lines errors - tag-supports-comment-line-hh-mm-ss-fff-3d-1h-3s-p4dt12h20m20-3s: 'Supports: comment (# line), HH:MM:SS.FFF, 3d 1h 3s..., P4DT12H20M20.3S..' + tag-supports-comment-line-hh-mm-ss-fff-3d-1h-3s-p4dt12h20m20-3s: + "Supports: comment (# line), HH:MM:SS.FFF, 3d 1h 3s..., + P4DT12H20M20.3S.." ecdsa-key-pair-generator: title: ECDSA key pair generator - description: >- - Generate new random ECDSA private and public keys (with or without + description: Generate new random ECDSA private and public keys (with or without passphrase). texts: label-nistp256: nistp256 @@ -2081,13 +2037,13 @@ tools: label-openssh-standard: OpenSSH Standard label-openssh-new: OpenSSH New label-putty: PuTTY - label-format: 'Format:' + label-format: "Format:" placeholder-select-a-key-format: Select a key format - label-curve: 'Curve:' + label-curve: "Curve:" placeholder-select-a-curve-type: Select a curve type - label-passphrase: 'Passphrase :' + label-passphrase: "Passphrase :" placeholder-passphrase: Passphrase - label-comment: 'Comment :' + label-comment: "Comment :" placeholder-comment: Comment tag-refresh-key-pair: Refresh key-pair tag-public-key: Public key @@ -2096,20 +2052,19 @@ tools: tag-md5-fingerprint: Fingerprint (MD5) ed25519-key-pair-generator: title: Ed25519 key pair generator - description: >- - Generate new random Ed25519 private and public keys (with or without - passphrase). + description: Generate new random Ed25519 private and public keys (with or + without passphrase). texts: label-pem: PEM label-pkcs-8: PKCS#8 label-openssh-standard: OpenSSH Standard label-openssh-new: OpenSSH New label-putty: PuTTY - label-format: 'Format:' + label-format: "Format:" placeholder-select-a-key-format: Select a key format - label-passphrase: 'Passphrase :' + label-passphrase: "Passphrase :" placeholder-passphrase: Passphrase - label-comment: 'Comment :' + label-comment: "Comment :" placeholder-comment: Comment tag-refresh-key-pair: Refresh key-pair tag-public-key: Public key @@ -2168,39 +2123,39 @@ tools: label-base64url-base-64-with-url-safe-chars: Base64url (base 64 with url safe chars) title-drag-and-drop-a-file-here-or-click-to-select-a-file: Drag and drop a file here, or click to select a file label-digest-encoding: Digest encoding - tag-createblake2b-bits-number-key-idatatype-promise: 'createBLAKE2b, // (bits?: number, key?: IDataType): Promise' - tag-createmd5-promise: 'createMD5, // (): Promise' - tag-createripemd160-promise: 'createRIPEMD160, // (): Promise' - tag-createsha1-promise: 'createSHA1, // (): Promise' - tag-createsha224-promise: 'createSHA224, // (): Promise' - tag-createsha256-promise: 'createSHA256, // (): Promise' - tag-createsha512-promise: 'createSHA512, // (): Promise' - tag-createsm3-promise: 'createSM3, // (): Promise' - tag-createwhirlpool-promise: 'createWhirlpool, // (): Promise' - tag-createxxhash32-seed-number-promise: '// createXXHash32, //(seed: number): Promise' - tag-createxxhash64-seedlow-number-seedhigh-number-promise: '// createXXHash64, //(seedLow: number, seedHigh: number): Promise' - tag-createxxhash3-seedlow-number-seedhigh-number-promise: '// createXXHash3, //(seedLow: number, seedHigh: number): Promise' - tag-createxxhash128-seedlow-number-seedhigh-number-promise: '// createXXHash128, //(seedLow: number, seedHigh: number): Promise' - tag-blake2b-await-createblake2b-bits-number-key-idatatype-promise: >- - BLAKE2b: await createBLAKE2b(), // (bits?: number, key?: IDataType): - Promise - tag-md5-await-createmd5-promise: 'MD5: await createMD5(), // (): Promise' - tag-ripemd160-await-createripemd160-promise: 'RIPEMD160: await createRIPEMD160(), // (): Promise' - tag-sha1-await-createsha1-promise: 'SHA1: await createSHA1(), // (): Promise' - tag-sha224-await-createsha224-promise: 'SHA224: await createSHA224(), // (): Promise' - tag-sha256-await-createsha256-promise: 'SHA256: await createSHA256(), // (): Promise' - tag-sha512-await-createsha512-promise: 'SHA512: await createSHA512(), // (): Promise' - tag-sm3-await-createsm3-promise: 'SM3: await createSM3(), // (): Promise' - tag-whirlpool-await-createwhirlpool-promise: 'Whirlpool: await createWhirlpool(), // (): Promise' + tag-createblake2b-bits-number-key-idatatype-promise: "createBLAKE2b, // (bits?: number, key?: IDataType): Promise" + tag-createmd5-promise: "createMD5, // (): Promise" + tag-createripemd160-promise: "createRIPEMD160, // (): Promise" + tag-createsha1-promise: "createSHA1, // (): Promise" + tag-createsha224-promise: "createSHA224, // (): Promise" + tag-createsha256-promise: "createSHA256, // (): Promise" + tag-createsha512-promise: "createSHA512, // (): Promise" + tag-createsm3-promise: "createSM3, // (): Promise" + tag-createwhirlpool-promise: "createWhirlpool, // (): Promise" + tag-createxxhash32-seed-number-promise: "// createXXHash32, //(seed: number): Promise" + tag-createxxhash64-seedlow-number-seedhigh-number-promise: "// createXXHash64, //(seedLow: number, seedHigh: number): Promise" + tag-createxxhash3-seedlow-number-seedhigh-number-promise: "// createXXHash3, //(seedLow: number, seedHigh: number): Promise" + tag-createxxhash128-seedlow-number-seedhigh-number-promise: "// createXXHash128, //(seedLow: number, seedHigh: number): Promise" + tag-blake2b-await-createblake2b-bits-number-key-idatatype-promise: + "BLAKE2b: await createBLAKE2b(), // (bits?: number, key?: IDataType): + Promise" + tag-md5-await-createmd5-promise: "MD5: await createMD5(), // (): Promise" + tag-ripemd160-await-createripemd160-promise: "RIPEMD160: await createRIPEMD160(), // (): Promise" + tag-sha1-await-createsha1-promise: "SHA1: await createSHA1(), // (): Promise" + tag-sha224-await-createsha224-promise: "SHA224: await createSHA224(), // (): Promise" + tag-sha256-await-createsha256-promise: "SHA256: await createSHA256(), // (): Promise" + tag-sha512-await-createsha512-promise: "SHA512: await createSHA512(), // (): Promise" + tag-sm3-await-createsm3-promise: "SM3: await createSM3(), // (): Promise" + tag-whirlpool-await-createwhirlpool-promise: "Whirlpool: await createWhirlpool(), // (): Promise" file-type: title: File Type Detector description: Identify the type of a file texts: title-drag-and-drop-a-file-here-or-click-to-select-a-file: Drag and drop a file here, or click to select a file title-information: Information - label-file-name: 'File name:' - label-extension: 'Extension:' - label-mime-type: 'MIME Type:' + label-file-name: "File name:" + label-extension: "Extension:" + label-mime-type: "MIME Type:" an-error-occured-processing: An error occured processing folder-structure-diagram: title: Folder Structure Diagram @@ -2244,49 +2199,48 @@ tools: label-megagram-force: megagram-force geo-distance-calculator: title: Geo distance calculator - description: >- - Compute distance between two geo location (and display current user + description: Compute distance between two geo location (and display current user location information) texts: title-distance-computer: Distance computer - label-geolocation-1-latitude-longitude: 'Geolocation 1 (latitude, longitude):' + label-geolocation-1-latitude-longitude: "Geolocation 1 (latitude, longitude):" placeholder-latitude: Latitude... placeholder-longitude: Longitude... - label-geolocation-2-latitude-longitude: 'Geolocation 2 (latitude, longitude):' - label-distance-km: 'Distance (km):' - label-distance-mile: 'Distance (mile):' - label-distance-meter: 'Distance (meter):' - label-distance-nmi: 'Distance (nmi):' + label-geolocation-2-latitude-longitude: "Geolocation 2 (latitude, longitude):" + label-distance-km: "Distance (km):" + label-distance-mile: "Distance (mile):" + label-distance-meter: "Distance (meter):" + label-distance-nmi: "Distance (nmi):" title-your-position: Your position - label-latitude: 'Latitude:' - label-longitude: 'Longitude:' - label-altitude: 'Altitude:' - label-heading: 'Heading:' - label-speed: 'Speed:' - label-accuracy: 'Accuracy:' + label-latitude: "Latitude:" + label-longitude: "Longitude:" + label-altitude: "Altitude:" + label-heading: "Heading:" + label-speed: "Speed:" + label-accuracy: "Accuracy:" gpt-token-estimator: title: GPT Token Estimator description: OpenAI GPT Token Estimator texts: message-invalid-messages-array: Invalid "messages" array message-invalid-tools-array: Invalid "tools" array - label-model: 'Model:' + label-model: "Model:" placeholder-select-gpt-model: Select GPT model label-advanded-json-mode: Advanded JSON Mode title-prompts: Prompts placeholder-your-messages-json-array: Your 'messages' JSON array... - label-your-messages-json-array: 'Your ''messages'' JSON array:' + label-your-messages-json-array: "Your 'messages' JSON array:" placeholder-your-tools-json-array: Your 'tools' JSON array... - label-your-tools-json-array: 'Your ''tools'' JSON array:' + label-your-tools-json-array: "Your 'tools' JSON array:" title-input-json-s: Input JSON(s) placeholder-your-system-prompt-content: Your System Prompt content... - label-your-system-prompt-content: 'Your System Prompt content:' + label-your-system-prompt-content: "Your System Prompt content:" placeholder-your-user-prompt-content: Your User Prompt content... - label-your-user-prompt-content: 'Your User Prompt content:' - label-used-tokens: 'Used Tokens:' - label-prompt-tokens: 'Prompt Tokens:' - label-completion-tokens: 'Completion Tokens:' - label-used-usd: 'Used USD:' + label-your-user-prompt-content: "Your User Prompt content:" + label-used-tokens: "Used Tokens:" + label-prompt-tokens: "Prompt Tokens:" + label-completion-tokens: "Completion Tokens:" + label-used-usd: "Used USD:" tag-see-openapi-pricings: See OpenAPI Pricings gzip-converter: title: GZip/Deflate converter @@ -2315,10 +2269,9 @@ tools: tag-sanitize-and-download: Sanitize and download hdd-calculator: title: HDD calculator - description: >- - Storage device manufacturers report capacities in decimal form (like GB), - while operating systems and other software uses binary form (GiB), - although still incorrectly using the decimal unit (GiB). This tool + description: Storage device manufacturers report capacities in decimal form + (like GB), while operating systems and other software uses binary form + (GiB), although still incorrectly using the decimal unit (GiB). This tool converts decimal form capacity into various binary forms. texts: label-kb: kB @@ -2343,7 +2296,7 @@ tools: label-png: PNG label-output-format: Output format title-drag-and-drop-a-heic-file-here-or-click-to-select-a-file: Drag and drop a HEIC file here, or click to select a file - an-error-occured-processing-heic-heif-is-invalid: 'An error occured processing: HEIC/HEIF is invalid.' + an-error-occured-processing-heic-heif-is-invalid: "An error occured processing: HEIC/HEIF is invalid." hex-file-converter: title: HEX File Converter description: Convert between file and hexadecimal representation @@ -2371,24 +2324,24 @@ tools: description: Clean HTML texts: placeholder-your-html-content: Your HTML content... - label-your-html-to-clean-can-paste-from-clipboard: 'Your HTML to clean (can paste from clipboard):' - label-output-cleaned-html: 'Output cleaned HTML:' + label-your-html-to-clean-can-paste-from-clipboard: "Your HTML to clean (can paste from clipboard):" + label-output-cleaned-html: "Output cleaned HTML:" html-prettifier: title: HTML Prettifier description: Prettify HTML code texts: placeholder-your-html-content: Your HTML content... - label-your-html-to-format-can-paste-from-clipboard: 'Your HTML to format (can paste from clipboard):' - label-output-prettified-html: 'Output prettified HTML:' + label-your-html-to-format-can-paste-from-clipboard: "Your HTML to format (can paste from clipboard):" + label-output-prettified-html: "Output prettified HTML:" html-to-markdown: title: HTML to markdown description: Convert HTML (either from clipboard) to Markdown texts: placeholder-your-html-content: Your HTML content... - label-your-html-to-convert-can-paste-from-clipboard: 'Your HTML to convert (can paste from clipboard):' - label-output-markdown: 'Output markdown:' - label-heading-style: 'Headings Style:' - label-emphasis-style: 'Emphasis Style:' + label-your-html-to-convert-can-paste-from-clipboard: "Your HTML to convert (can paste from clipboard):" + label-output-markdown: "Output markdown:" + label-heading-style: "Headings Style:" + label-emphasis-style: "Emphasis Style:" label-hash: Hash (#) label-underline: Underline (=/-) label-surround-heading: Surround (= Heading =) @@ -2397,9 +2350,8 @@ tools: label-tilde: Tilde (~) markdown-format-converter: title: Format Converter - description: >- - Convert between standard Markdown, Obsidian, Logseq, Slack, Jira, and - other formats. + description: Convert between standard Markdown, Obsidian, Logseq, Slack, Jira, + and other formats. texts: label-source-format: Source Format label-target-format: Target Format @@ -2433,22 +2385,21 @@ tools: title: Image Formats Converter description: Convert images from one format to another texts: - label-output-format: 'Output format:' + label-output-format: "Output format:" placeholder-select-output-format: Select output format - label-output-quality: 'Output quality:' - label-svg-scaling: 'SVG scaling:' + label-output-quality: "Output quality:" + label-svg-scaling: "SVG scaling:" title-drag-and-drop-images-files-here-or-click-to-select-some-files: Drag and drop images files here, or click to select some files - tag-first-select-output-options: 'First, select output options:' - tag-then-drag-and-drop-your-images-below-and-they-will-be-converted-and-downloaded-immediately: >- - Then, drag and drop your images below and they will be converted and - downloaded immediately: + tag-first-select-output-options: "First, select output options:" + tag-then-drag-and-drop-your-images-below-and-they-will-be-converted-and-downloaded-immediately: + "Then, drag and drop your images below and they will be converted and + downloaded immediately:" invalid-image-file: Invalid Image file! an-error-occured-processing: An error occured processing image-exif-reader: title: Image EXIF/Metadata/GPS/JPEG Quality reader - description: >- - Read EXIF, IPTC, XMP, GPS and other metadata, JPEG Quality, and other - infos from images files + description: Read EXIF, IPTC, XMP, GPS and other metadata, JPEG Quality, and + other infos from images files texts: title-drag-and-drop-a-image-file-here-or-click-to-select-a-file: Drag and drop a Image file here, or click to select a file title-jpeg-quality: JPEG Quality @@ -2467,7 +2418,7 @@ tools: texts: title-drag-and-drop-a-image-file-here-or-click-to-select-a-file: Drag and drop a Image file here, or click to select a file label-output-scale: Output scale - label-ascii-art-text: 'Ascii Art text:' + label-ascii-art-text: "Ascii Art text:" tag-processing: Processing... tag-current-settings-resulted-in-error: Current settings resulted in error. image-to-css: @@ -2483,7 +2434,7 @@ tools: title-drag-and-drop-an-image-here-or-click-to-select-a-file: Drag and drop an image here, or click to select a file label-svg-content: SVG Content placeholder-paste-your-svg-content-here: Paste your SVG content here - label-css-type: 'CSS Type:' + label-css-type: "CSS Type:" placeholder-select-css-type: Select CSS Type tag-css-code: CSS Code integers-to-ip: @@ -2495,7 +2446,7 @@ tools: label-decimal: Decimal label-hexadecimal: Hexadecimal label-input-number: Input number - placeholder-put-your-number-here-ex-3232235777: 'Put your number here (ex: 3232235777)' + placeholder-put-your-number-here-ex-3232235777: "Put your number here (ex: 3232235777)" label-input-base: Input base placeholder-select-a-base: Select a base label-formatted-ipv4: Formatted IPv4 @@ -2507,10 +2458,10 @@ tools: description: Calculate IP Range from a CIDR (IPv4/6) texts: message-invalid-ipv4-6-cidr: Invalid ipv4/6 CIDR - label-ipv4-6-cidr-ie-1-0-0-0-23-or-1-1-1-1-255-255-252-0-or-1-1-1-1-2-2-2-2-or-10-0-0: >- + label-ipv4-6-cidr-ie-1-0-0-0-23-or-1-1-1-1-255-255-252-0-or-1-1-1-1-2-2-2-2-or-10-0-0: IPv4/6 CIDR (ie, 1.0.0.0/23 or 1.1.1.1/255.255.252.0 or 1.1.1.1-2.2.2.2 or 10.0.0.*) - placeholder-ipv4-6-cidr-ie-1-0-0-0-23-or-1-1-1-1-255-255-252-0-or-1-1-1-1-2-2-2-2-or-10-0-0: >- + placeholder-ipv4-6-cidr-ie-1-0-0-0-23-or-1-1-1-1-255-255-252-0-or-1-1-1-1-2-2-2-2-or-10-0-0: IPv4/6 CIDR (ie, 1.0.0.0/23 or 1.1.1.1/255.255.252.0 or 1.1.1.1-2.2.2.2 or 10.0.0.*) title-resulting-cidr: Resulting CIDR @@ -2531,19 +2482,17 @@ tools: tag-signup-for-a-free-token: Signup for a free token tag-click-on-button-above-to-get-latest-infos: Click on button above to get latest infos tag-localize-on-open-street-map: Localize on Open Street Map - externalAccess: >- - This tool sends provided IP(s) to https://ipinfo.io/ to get IP Geolocation - information + externalAccess: This tool sends provided IP(s) to https://ipinfo.io/ to get IP + Geolocation information ip-include-exclude: title: IP Subnets Exclude Calculator - description: >- - Substract a disallowed IP Ranges/Mask/CIDR list from an allowed IP + description: Substract a disallowed IP Ranges/Mask/CIDR list from an allowed IP Ranges/Mask/CIDR list texts: label-allowedips-ipv4-6-cidr-range-mask-wildcard: AllowedIPs (IPv4/6 CIDR/Range/Mask/Wildcard) placeholder-an-ipv4-6-cidr-range-mask-wildcard: An IPv4/6 CIDR/Range/Mask/Wildcard... label-disallowedips-ipv4-6-cidr-range-mask-wildcard: DisallowedIPs (IPv4/6 CIDR/Range/Mask/Wildcard) - label-final-allowedips: 'Final AllowedIPs:' + label-final-allowedips: "Final AllowedIPs:" title-allowed-subnets: Allowed Subnets title-disallowed-subnets: Disallowed Subnets ip-range-to-cidr: @@ -2559,29 +2508,28 @@ tools: title-invalid-combination-of-start-and-end-ipv4-6-address: Invalid combination of start and end IPv4/6 address title-invalid-combination-of-ip-version-4-6: Invalid combination of IP version 4/6 tag-switch-start-and-end-ipv4-6-address: Switch start and end IPv4/6 address - tag-start-ip-and-end-ip-must-be-of-same-version-ipv4-or-ipv6: 'Start IP and End IP must be of same version: IPv4 or IPv6' + tag-start-ip-and-end-ip-must-be-of-same-version-ipv4-or-ipv6: "Start IP and End IP must be of same version: IPv4 or IPv6" ipv6-address-converter: title: Ipv6 address converter description: Convert an ip address into decimal, binary, hexadecimal and get infos texts: - label-decimal: 'Decimal: ' - label-hexadecimal: 'Hexadecimal: ' - label-binary: 'Binary: ' - label-cidr: 'CIDR: ' - label-ipv6-short: 'Ipv6 (short): ' - label-ipv6-long: 'Ipv6 (long): ' - label-arpa: 'ARPA: ' - label-microsoft-transcription: 'Microsoft Transcription: ' - label-type: 'Type: ' + label-decimal: "Decimal: " + label-hexadecimal: "Hexadecimal: " + label-binary: "Binary: " + label-cidr: "CIDR: " + label-ipv6-short: "Ipv6 (short): " + label-ipv6-long: "Ipv6 (long): " + label-arpa: "ARPA: " + label-microsoft-transcription: "Microsoft Transcription: " + label-type: "Type: " message-invalid-ipv6-address: Invalid ipv6 address - label-the-ipv6-address: 'The ipv6 address:' + label-the-ipv6-address: "The ipv6 address:" placeholder-the-ipv6-address: The ipv6 address... placeholder-set-a-correct-ipv6-address: Set a correct ipv6 address ipv6-subnet-calculator: title: Ipv6 subnet calculator - description: >- - Parse your IPv6 CIDR blocks and get all the info you need about your sub - network. + description: Parse your IPv6 CIDR blocks and get all the info you need about + your sub network. texts: message-we-cannot-parse-this-address-check-the-format: We cannot parse this address, check the format label-full-address: Full address @@ -2626,7 +2574,7 @@ tools: description: Allow searching for Country Code (ISO 3166) and info texts: placeholder-search-countries-by-name-iso2-iso3: Search Countries by name, iso2, iso3... - label-max-results: 'Max results:' + label-max-results: "Max results:" label-name: Name label-official-name: Official Name label-domain: Domain @@ -2647,15 +2595,15 @@ tools: tag-search-result: Search result tag-iso2-iso3: Iso2/Iso3 tag-name-and-info: Name and Info - tag-gt-see-on-openstreetmap: '> See on OpenStreetMap' + tag-gt-see-on-openstreetmap: "> See on OpenStreetMap" loading-more-results: Loading more results... javascript-prettifier: title: Javascript Prettifier description: JS/Javascript Prettifier texts: placeholder-your-js-content: Your JS content... - label-your-js-to-format-can-paste-from-clipboard: 'Your JS to format (can paste from clipboard):' - label-output-prettified-js: 'Output prettified JS:' + label-your-js-to-format-can-paste-from-clipboard: "Your JS to format (can paste from clipboard):" + label-output-prettified-js: "Output prettified JS:" jq-memo: title: Jq Cheatsheet description: JQ command cheatsheet @@ -2678,36 +2626,35 @@ tools: tag-see-jsonpath-cheatsheet: See JSONPath Cheatsheet js-unobfuscator: title: Javascript Unobfuscator/Unpacker - description: >- - webcrack is a tool for reverse engineering javascript. It can deobfuscate - obfuscator.io, unminify, transpile, and unpack webpack/browserify, to - resemble the original source code as much as possible. + description: webcrack is a tool for reverse engineering javascript. It can + deobfuscate obfuscator.io, unminify, transpile, and unpack + webpack/browserify, to resemble the original source code as much as + possible. texts: title-sandbox: sandbox placeholder-your-obfuscate-javascript-code: Your obfuscate Javascript code - label-obfuscate-javascript-code: 'Obfuscate Javascript code:' - label-deobfuscated-code: 'Deobfuscated code:' - label-bundle: 'Bundle:' + label-obfuscate-javascript-code: "Obfuscate Javascript code:" + label-deobfuscated-code: "Deobfuscated code:" + label-bundle: "Bundle:" json-editor: title: JSON Editor description: Edit JSON content texts: - label-current-selected-node-jsonpath: 'Current Selected Node JSONPath:' - label-your-edited-json: 'Your edited JSON:' + label-current-selected-node-jsonpath: "Current Selected Node JSONPath:" + label-your-edited-json: "Your edited JSON:" title-the-following-errors-occured: The following errors occured tag-validation-successful: Validation successful! label-no-validation: No validation label-custom: Custom - label-json-schema: 'JSON schema:' + label-json-schema: "JSON schema:" placeholder-paste-your-json-schema-here: Paste your JSON Schema here... title-schema-validation-errors: Schema Validation Errors - label-indent-size-0-compact: 'Indent size (0 = Compact):' + label-indent-size-0-compact: "Indent size (0 = Compact):" repair-json: Repair JSON label-auto-height: Auto Height - externalAccess: >- - This tool may download a JSON schema from https://www.schemastore.org (or - the configured schema catalog) when validation is requested. No data is - sent externally. + externalAccess: This tool may download a JSON schema from + https://www.schemastore.org (or the configured schema catalog) when + validation is requested. No data is sent externally. json-escaper: title: Json Escaper/Unescaper description: Escape and unescape JSON string @@ -2725,22 +2672,21 @@ tools: title: JSON Linter description: Check and lint JSON content texts: - label-paste-your-json-file-content: 'Paste your JSON file content:' + label-paste-your-json-file-content: "Paste your JSON file content:" title-the-following-errors-occured: The following errors occured tag-validation-successful: Validation successful! label-no-validation: No validation label-custom: Custom - label-json-schema: 'JSON schema:' + label-json-schema: "JSON schema:" placeholder-paste-your-json-schema-here: Paste your JSON Schema here... title-schema-validation-errors: Schema Validation Errors title-formatted-version: Formatted version - label-indent-size-0-compact: 'Indent size (0 = Compact):' + label-indent-size-0-compact: "Indent size (0 = Compact):" title-repaired-version: Auto Repaired and Formatted version - label-auto-repair-json: 'Auto Repair JSON:' - externalAccess: >- - This tool may download a JSON schema from https://www.schemastore.org (or - the configured schema catalog) when validation is requested. No data is - sent externally. + label-auto-repair-json: "Auto Repair JSON:" + externalAccess: This tool may download a JSON schema from + https://www.schemastore.org (or the configured schema catalog) when + validation is requested. No data is sent externally. json-size-analyzer: title: Json Size Analyzer description: Measure JSON nodes relative weights @@ -2749,7 +2695,7 @@ tools: title-input: Input label-json: JSON placeholder-put-your-json-data-here: Put your JSON data here... - label-max-depth: 'Max Depth:' + label-max-depth: "Max Depth:" label-target-node: Target Node placeholder-where-to-start-the-analyze-ie-a-0-b-c: Where to start the analyze (ie, a[0].b.c) title-analysis: Analysis @@ -2811,9 +2757,8 @@ tools: output-label-php-array-version: PHP Array version json-to-schema: title: Json to Schema - description: >- - Convert JSON data to JSON Schema, MySQL DDL, Mongoose Schema, Google - BigQuery schema or ClickHouse Table Schema + description: Convert JSON data to JSON Schema, MySQL DDL, Mongoose Schema, + Google BigQuery schema or ClickHouse Table Schema texts: label-generic: Generic label-json-schema: JSON Schema @@ -2837,23 +2782,23 @@ tools: texts: message-invalid-json-string: Invalid JSON string placeholder-algorithms: Algorithms - label-description: 'Description:' + label-description: "Description:" title-token-content: Token Content - label-header: 'Header:' - label-payload: 'Payload:' + label-header: "Header:" + label-payload: "Payload:" placeholder-json-payload: JSON payload - label-public-key-pem: 'Public Key (PEM):' - label-private-key-pem: 'Private Key (PEM):' - label-public-key-jwk: 'Public Key (JWK):' - label-private-key-jwk: 'Private Key (JWK):' - title-generated-jwt-token: 'Generated JWT Token:' - label-secret-encoding: 'Secret Encoding:' + label-public-key-pem: "Public Key (PEM):" + label-private-key-pem: "Private Key (PEM):" + label-public-key-jwk: "Public Key (JWK):" + label-private-key-jwk: "Private Key (JWK):" + title-generated-jwt-token: "Generated JWT Token:" + label-secret-encoding: "Secret Encoding:" label-raw-text: Raw Text label-hex-array: Hex Array - verify-description: '{0}: {1} (verify with {2})' + verify-description: "{0}: {1} (verify with {2})" token-secret: Token Secret token-keys: Token Keys - cannot-parse-secret-as-encoding: 'Cannot parse ''{0}'' as ''{1}'': {2}' + cannot-parse-secret-as-encoding: "Cannot parse '{0}' as '{1}': {2}" invalid-base64-string: Invalid Base64 string placeholder-input-token: Paste your JWT token to edit... click-to-input-a-existing-jwt-token-to-modify: Click to input a existing JWT token to modify @@ -2910,24 +2855,23 @@ tools: tag-invalid-luhn-key: Invalid Luhn Key. mac-address-converter: title: MAC Address Converter - description: >- - Change the format of a MAC address and chose between different formats - (EUI-48, EUI-64, IPv6) + description: Change the format of a MAC address and chose between different + formats (EUI-48, EUI-64, IPv6) texts: - label-canonical-ietf-format: 'Canonical IETF Format:' - label-canonical-format: 'Canonical Format:' - label-canonical-ieee-format: 'Canonical IEEE Format:' - label-cisco: 'Cisco:' - label-hex: 'Hex:' - label-decimal: 'Decimal:' - label-eui-64-canonical-ietf-format: 'EUI-64 Canonical IETF Format:' - label-eui-64-canonical-ieee-format: 'EUI-64 Canonical IEEE Format:' - label-eui-64-cisco: 'EUI-64 Cisco:' - label-eui-64-ipv6-canonical-ietf-format: 'EUI-64 IPv6 Canonical IETF Format:' - label-eui-64-ipv6-canonical-ieee-format: 'EUI-64 IPv6 Canonical IEEE Format:' - label-eui-64-ipv6-cisco: 'EUI-64 IPv6 Cisco:' - label-link-local-ipv6: 'Link-Local IPv6:' - label-mac-address: 'MAC address:' + label-canonical-ietf-format: "Canonical IETF Format:" + label-canonical-format: "Canonical Format:" + label-canonical-ieee-format: "Canonical IEEE Format:" + label-cisco: "Cisco:" + label-hex: "Hex:" + label-decimal: "Decimal:" + label-eui-64-canonical-ietf-format: "EUI-64 Canonical IETF Format:" + label-eui-64-canonical-ieee-format: "EUI-64 Canonical IEEE Format:" + label-eui-64-cisco: "EUI-64 Cisco:" + label-eui-64-ipv6-canonical-ietf-format: "EUI-64 IPv6 Canonical IETF Format:" + label-eui-64-ipv6-canonical-ieee-format: "EUI-64 IPv6 Canonical IEEE Format:" + label-eui-64-ipv6-cisco: "EUI-64 IPv6 Cisco:" + label-link-local-ipv6: "Link-Local IPv6:" + label-mac-address: "MAC address:" placeholder-type-a-mac-address: Type a MAC address many-units-converter: title: Many Units Converter @@ -2935,7 +2879,7 @@ tools: texts: label-units-expression: Units expression placeholder-please-enter-an-unit-expression-ie-1d-2m: Please enter an unit expression, ie '1d 2m' - label-target-unit: 'Target Unit:' + label-target-unit: "Target Unit:" placeholder-select-the-target-unit: Select the target unit title-result: Result label-best-target-unit: Best Target Unit @@ -2952,13 +2896,13 @@ tools: description: Generate a TOC from a markdown file/content texts: title-options: Options - label-max-heading-level: 'Max Heading Level:' + label-max-heading-level: "Max Heading Level:" placeholder-max-heading-level: Max Heading Level... label-bullet-chars: Bullet Chars placeholder-bullet-chars: Bullet Chars label-anchors-prefix: Anchors Prefix placeholder-anchors-prefix: Anchors Prefix - label-indents: 'Indents: ' + label-indents: "Indents: " placeholder-indents: Indents... label-comment-styles: Comment Styles placeholder-comment-styles: Comment Styles @@ -2968,7 +2912,7 @@ tools: tag-generate-anchors: Generate Anchors tag-advanced: Advanced tag-concat-spaces: Concat Spaces - tag-you-can-paste-a-document-with-existing-toc-generated-by-this-tool-or-add-a: >- + tag-you-can-paste-a-document-with-existing-toc-generated-by-this-tool-or-add-a: You can paste a document with existing TOC (generated by this tool) or add a tag-marker-in-your-document-on-a-single-line: marker in your document (on a single line) @@ -3016,34 +2960,33 @@ tools: label-typst: Typst placeholder-put-your-math-expression-here: Put your math expression here... label-mathematical-expression-to-convert: Mathematical expression to convert - label-source-format: 'Source format:' + label-source-format: "Source format:" placeholder-source-format: Source format - label-target-format: 'Target format:' + label-target-format: "Target format:" placeholder-target-format: Target format - title-converted-expression: 'Converted expression:' + title-converted-expression: "Converted expression:" math-ocr: title: Math OCR description: Convert Math Formula images to Latex texts: title-drag-and-drop-a-image-here-or-click-to-select-a-file: Drag and drop a Image here, or click to select a file - tag-nb-processing-is-done-in-your-browser-so-be-patient-processing-can-take-a-while: >- - NB: processing is done in your browser, so be patient, processing can - take a while - tag-this-tool-required-internet-connection-to-access-models: >- + tag-nb-processing-is-done-in-your-browser-so-be-patient-processing-can-take-a-while: + "NB: processing is done in your browser, so be patient, processing can + take a while" + tag-this-tool-required-internet-connection-to-access-models: This tool needs access to Hugging Face or the configured models mirror (to download models) tag-latex-result: Latex Result - externalAccess: >- - This tool downloads the LaTeX OCR recognition model (Xenova/texify) from - https://huggingface.co/ (or the configured models mirror). Processing is - done in your browser. + externalAccess: This tool downloads the LaTeX OCR recognition model + (Xenova/texify) from https://huggingface.co/ (or the configured models + mirror). Processing is done in your browser. mermaid-exporter: title: Mermaid exporter description: Convert Markdown (Mermaid) to image and allow to export to PNG, JPG & SVG texts: title-input-mermaid: Input Mermaid placeholder-write-your-mermaid-code-here: Write your Mermaid code here... - label-your-mermaid-to-convert: 'Your Mermaid to convert:' + label-your-mermaid-to-convert: "Your Mermaid to convert:" title-preview: Preview tag-invalid-mermaid-syntax: Invalid Mermaid syntax tag-showing-last-valid-diagram: Showing the last valid diagram @@ -3089,32 +3032,32 @@ tools: description: Encode/Decode to Morse code texts: title-encode: Encode - label-your-text: 'Your text:' + label-your-text: "Your text:" placeholder-the-string-to-encode: The string to encode - label-your-text-encoded-to-morse-code: 'Your text encoded to Morse code:' + label-your-text-encoded-to-morse-code: "Your text encoded to Morse code:" placeholder-your-string-encoded: Your string encoded title-decode: Decode - label-your-morse-encoded-text: 'Your Morse encoded text:' + label-your-morse-encoded-text: "Your Morse encoded text:" placeholder-the-string-to-decode: The string to decode title-error-while-decoding: Error while decoding - label-your-decoded-text: 'Your decoded text:' + label-your-decoded-text: "Your decoded text:" placeholder-your-string-decoded: Your string decoded my-ip: title: My IP Address description: Get your client IP Address (IPv4/6) using https://www.ipify.org/ texts: title-your-ipv4-6-address-details: Your IPv4/6 address details - label-ipv4: 'IPv4:' + label-ipv4: "IPv4:" placeholder-your-ipv4: Your IPv4 - label-ipv6: 'IPv6:' + label-ipv6: "IPv6:" placeholder-your-ipv6: Your IPv6 - label-country: 'Country:' - label-country-name: 'Country Name:' - label-continent-name: 'Continent Name:' + label-country: "Country:" + label-country-name: "Country Name:" + label-continent-name: "Continent Name:" tag-refresh: Refresh - externalAccess: >- - This tool get IPv4/6 using API of https://www.ipify.org/ and download IP - Info data from https://cdn.jsdelivr.net/npm/{'@'}iplookup/country-extra/ + externalAccess: This tool get IPv4/6 using API of https://www.ipify.org/ and + download IP Info data from + https://cdn.jsdelivr.net/npm/{'@'}iplookup/country-extra/ nano-memo: title: Nano CheatSheet description: Nano Editor Cheatsheet @@ -3146,10 +3089,9 @@ tools: label-spaces-chars: Spaces chars label-word-count-no-punct: Word count (no punct) tag-ocr: OCR - externalAccess: >- - English and Simplified Chinese OCR language data is included. Other - languages are downloaded from https://cdn.jsdelivr.net (or the configured - language data mirror). + externalAccess: English and Simplified Chinese OCR language data is included. + Other languages are downloaded from https://cdn.jsdelivr.net (or the + configured language data mirror). option43-generator: title: Option43 generator description: Generate Option43 Wifi DHCP configuration @@ -3171,11 +3113,11 @@ tools: label-fortinet-new-capwap: Fortinet (new/CAPWAP) label-netgear: Netgear label-cambium-cnmaestro: Cambium cnMaestro - label-wifi-vendor: 'Wifi Vendor:' + label-wifi-vendor: "Wifi Vendor:" placeholder-select-a-wifi-vendor: Select a Wifi Vendor - label-dhcp-vendor: 'DHCP Vendor:' + label-dhcp-vendor: "DHCP Vendor:" placeholder-select-a-dhcp-vendor: Select a DHCP Vendor - label-ip-address-es-one-per-line: 'IP Address(es) (one per line):' + label-ip-address-es-one-per-line: "IP Address(es) (one per line):" placeholder-enter-your-ip-addresses-one-per-line: Enter your IP Addresses (one per line) title-option-43-result: Option 43 Result outlook-parser: @@ -3232,11 +3174,11 @@ tools: placeholder-passphrase: Passphrase... tag-copy: Copy tag-refresh: Refresh - cannot-generate-a-passphrase-of-minlen-value-maxlen-value-characters-please-retry: >- - # Cannot generate a passphrase of [{0} - {1}] characters with current - settings, try to change words count + cannot-generate-a-passphrase-of-minlen-value-maxlen-value-characters-please-retry: + "# Cannot generate a passphrase of [{0} - {1}] characters with current + settings, try to change words count" words-words: Words ({0}) - label-min-passphrase-len: 'Min passphrase len:' + label-min-passphrase-len: "Min passphrase len:" paste-as-markdown: title: Paste as Markdown description: Paste cells/tables and links from clipboard content as Markdown @@ -3257,7 +3199,7 @@ tools: label-allow-no-modifications: Allow no modifications label-allow-document-assembly-only: Allow document assembly only label-allow-document-assembly-only-filling-in-form-fields-and-signing: Allow document assembly only + filling in form fields and signing - label-allow-document-assembly-only-filling-in-form-fields-and-signing-commenting-and-modifying-forms: >- + label-allow-document-assembly-only-filling-in-form-fields-and-signing-commenting-and-modifying-forms: Allow document assembly only + filling in form fields and signing + commenting and modifying forms label-allow-full-document-modification: Allow full document modification @@ -3265,13 +3207,13 @@ tools: title-permissions: Permissions label-control-modify-access-by-level: Control modify access by level label-control-printing-access: Control printing access - label-owner-password: 'Owner password:' + label-owner-password: "Owner password:" placeholder-owner-password-optional: Owner password (optional) - label-user-password: 'User password:' + label-user-password: "User password:" placeholder-user-password-optional: User password (optional) title-logs: Logs label-qpdf: qpdf - tag-output-file: 'Output file:' + tag-output-file: "Output file:" tag-restrict-accessibility-usually-ignored: Restrict accessibility (usually ignored) tag-restrict-commenting-filling-form-fields: Restrict commenting/filling form fields tag-restrict-document-assembly: Restrict document assembly @@ -3294,34 +3236,34 @@ tools: title-drag-and-drop-a-pdf-file-here-or-click-to-select-a-file: Drag and drop a PDF file here, or click to select a file title-logs: Logs label-qpdf: qpdf - label-password: 'Password:' + label-password: "Password:" placeholder-password: Password tag-decrypt-pdf: Decrypt PDF - tag-output-file: 'Output file:' + tag-output-file: "Output file:" pgp-encryption: title: PGP encryption description: Encrypt and decrypt text clear text using PGP Keys. texts: title-encrypt: Encrypt - label-your-text: 'Your text:' + label-your-text: "Your text:" placeholder-the-string-to-encrypt: The string to encrypt - label-target-public-key: 'Target public key:' + label-target-public-key: "Target public key:" placeholder-target-public-key: Target public key - label-your-private-key: 'Your private key:' + label-your-private-key: "Your private key:" placeholder-the-private-key-to-use-to-sign-message: The private key to use to sign message - label-your-private-key-password: 'Your private key password:' + label-your-private-key-password: "Your private key password:" title-error-while-encrypting: Error while encrypting - label-your-text-encrypted: 'Your text encrypted:' + label-your-text-encrypted: "Your text encrypted:" placeholder-your-string-encrypted: Your string encrypted title-decrypt: Decrypt - label-your-pgp-message-to-decrypt: 'Your PGP Message to decrypt:' + label-your-pgp-message-to-decrypt: "Your PGP Message to decrypt:" placeholder-the-string-to-decrypt: The string to decrypt placeholder-the-private-key-to-use-to-decrypt-message: The private key to use to decrypt message - label-sender-public-key: 'Sender public key:' + label-sender-public-key: "Sender public key:" placeholder-sender-public-key: Sender public key title-error-while-decrypting: Error while decrypting title-signature-verification: Signature verification - label-your-text-decrypted: 'Your text decrypted:' + label-your-text-decrypted: "Your text decrypted:" placeholder-your-string-decrypted: Your string decrypted tag-your-browser-is-not-in: Your browser is not in tag-secure-context-https: '"Secure Context" (HTTPS)' @@ -3330,8 +3272,7 @@ tools: tag-signing-public-key-optional: Signing public key (optional) pgp-key-pair-generator: title: PGP keygen - description: >- - Generate new random PGP private and public keys (with or without + description: Generate new random PGP private and public keys (with or without passphrase). php-array-to-json: title: PHP-Array to JSON @@ -3370,27 +3311,27 @@ tools: tag-posterize: Posterize? tag-potrace-result: Potrace result button-trace: Trace - minimum-angle-displacement-in-degrees-to-be-considered-a-cutting-point-between-curves: >- + minimum-angle-displacement-in-degrees-to-be-considered-a-cutting-point-between-curves: Minimum Angle Displacement (in degrees) to be considered a cutting point between curves - splice-threshold-more-accurate: 'Splice Threshold (More accurate):' - perform-iterative-subdivide-smooth-until-all-segments-are-shorter-than-this-length: >- + splice-threshold-more-accurate: "Splice Threshold (More accurate):" + perform-iterative-subdivide-smooth-until-all-segments-are-shorter-than-this-length: Perform Iterative Subdivide Smooth until all segments are shorter than this length - length-threshold-more-coarse: 'Length Threshold (More coarse):' - minimum-momentary-angle-in-degrees-to-be-considered-a-corner-to-be-kept-after-smoothing: >- + length-threshold-more-coarse: "Length Threshold (More coarse):" + minimum-momentary-angle-in-degrees-to-be-considered-a-corner-to-be-kept-after-smoothing: Minimum Momentary Angle (in degrees) to be considered a corner (to be kept after smoothing) - corner-threshold-smoother: 'Corner Threshold (Smoother):' - layer-difference: 'Layer Difference:' + corner-threshold-smoother: "Corner Threshold (Smoother):" + layer-difference: "Layer Difference:" number-of-significant-bits-to-use-in-a-rgb-channel: Number of significant bits to use in a RGB channel - color-precision-more-accurate: 'Color Precision (More accurate):' + color-precision-more-accurate: "Color Precision (More accurate):" color-difference-between-gradient-layers: Color difference between gradient layers - gradient-step-less-layers: 'Gradient Step (Less layers):' + gradient-step-less-layers: "Gradient Step (Less layers):" discard-patches-small-than-x-px-in-size: Discard patches small than X px in size - filter-speckle-cleaner: 'Filter Speckle (Cleaner):' - hierarchical-mode: 'Hierarchical Mode:' - curve-fitting: 'Curve Fitting:' + filter-speckle-cleaner: "Filter Speckle (Cleaner):" + hierarchical-mode: "Hierarchical Mode:" + curve-fitting: "Curve Fitting:" color-vtracer: Color (VTracer) color-potrace: Color (Potrace) bw: BW @@ -3468,11 +3409,11 @@ tools: description: Convert px to rem and vice versa texts: title-px-to-rem: px to rem - label-pixel-value-px: 'Pixel value (px):' - label-corresponding-rem-value: 'Corresponding rem value:' + label-pixel-value-px: "Pixel value (px):" + label-corresponding-rem-value: "Corresponding rem value:" title-rem-to-px: rem to px - label-rem-value-rem: 'Rem value (rem):' - label-corresponding-px-value: 'Corresponding px value:' + label-rem-value-rem: "Rem value (rem):" + label-corresponding-px-value: "Corresponding px value:" remove-exif: title: Remove EXIF description: Remove Exif from JPEG Files @@ -3483,31 +3424,31 @@ tools: description: RMB/Renminbi Capitalization Conversion Tool texts: title-lower-case-amount: Lower Case Amount - placeholder-enter-the-amount-in-lowercase-example-1314-52: 'Enter the amount in lowercase (example: 1314.52)' + placeholder-enter-the-amount-in-lowercase-example-1314-52: "Enter the amount in lowercase (example: 1314.52)" title-amount-in-capital-letters: Amount in Capital Letters rsa-ecdsa-signing: title: RSA/DSA/ECDSA Signer and Verifier description: Sign data and verify signature using RSA/DSA/ECDSA Keys texts: title-sign: Sign - label-your-text: 'Your text:' + label-your-text: "Your text:" placeholder-the-string-to-sign: The string to sign - label-hash-type: 'Hash Type:' + label-hash-type: "Hash Type:" placeholder-select-the-hashing-algorithm: Select the hashing algorithm - label-your-private-key: 'Your private key:' + label-your-private-key: "Your private key:" placeholder-the-private-key-to-use-to-sign-message: The private key to use to sign message - label-your-private-key-password: 'Your private key password:' + label-your-private-key-password: "Your private key password:" title-error-while-signing: Error while signing - label-asn1-signature: 'ASN1 Signature:' + label-asn1-signature: "ASN1 Signature:" placeholder-asn1-signature: ASN1 Signature - label-ssh-signature: 'SSH Signature:' + label-ssh-signature: "SSH Signature:" placeholder-ssg-signature: SSG Signature title-verify: Verify - label-your-text-to-verify: 'Your text to verify:' + label-your-text-to-verify: "Your text to verify:" placeholder-the-string-to-verify: The string to verify - label-associated-signature: 'Associated signature:' + label-associated-signature: "Associated signature:" placeholder-text-signature: Text signature - label-public-key: 'Public key:' + label-public-key: "Public key:" placeholder-public-key: Public key title-error-while-verifying: Error while verifying title-signature-failed: Signature failed @@ -3523,30 +3464,30 @@ tools: label-rsaes-oaep-sha-256: RSAES-OAEP/SHA-256 label-rsaes-oaep-sha-256-mgf1-sha-1-rsa-ecb-oaepwithsha-256andmgf1padding: RSAES-OAEP/SHA-256/MGF1-SHA-1 (RSA/ECB/OAEPWithSHA-256AndMGF1Padding) title-encrypt: Encrypt - label-your-text: 'Your text:' + label-your-text: "Your text:" placeholder-the-string-to-encrypt: The string to encrypt - label-scheme: 'Scheme:' + label-scheme: "Scheme:" placeholder-select-the-encryption-scheme: Select the encryption scheme - label-target-public-key: 'Target public key:' + label-target-public-key: "Target public key:" placeholder-target-public-key: Target public key title-error-while-encrypting: Error while encrypting - label-your-text-encrypted: 'Your text encrypted:' + label-your-text-encrypted: "Your text encrypted:" placeholder-your-string-encrypted: Your string encrypted title-decrypt: Decrypt - label-your-pgp-message-to-decrypt: 'Your PGP Message to decrypt:' + label-your-pgp-message-to-decrypt: "Your PGP Message to decrypt:" placeholder-the-string-to-decrypt: The string to decrypt - label-your-private-key: 'Your private key:' + label-your-private-key: "Your private key:" placeholder-the-private-key-to-use-to-decrypt-message: The private key to use to decrypt message - label-your-private-key-password: 'Your private key password:' + label-your-private-key-password: "Your private key password:" title-error-while-decrypting: Error while decrypting - label-your-text-decrypted: 'Your text decrypted:' + label-your-text-decrypted: "Your text decrypted:" placeholder-your-string-decrypted: Your string decrypted rune-converter: title: Rune converter description: Convert Text to Runes and vice-versa texts: - label-rune-type: 'Rune Type:' - placeholder-rune-type: 'Rune Type:' + label-rune-type: "Rune Type:" + placeholder-rune-type: "Rune Type:" title-text-to-runes: Text to Runes placeholder-e-g-hello-avengers: e.g. 'Hello Avengers' label-enter-text-to-convert-to-runes: Enter text to convert to runes @@ -3563,12 +3504,12 @@ tools: title: Sensitive data masker description: Clean sensitive data from textual content (ie logs) texts: - label-your-custom-cleaning-regex-es-case-insensitive: 'Your custom cleaning regex(es) (case insensitive):' + label-your-custom-cleaning-regex-es-case-insensitive: "Your custom cleaning regex(es) (case insensitive):" placeholder-your-custom-cleaning-regex-es: Your custom cleaning regex(es) placeholder-no-fallback: No Fallback - input-label-your-log-textual-data: 'Your log/textual data:' + input-label-your-log-textual-data: "Your log/textual data:" input-placeholder-paste-your-log-textual-data-here: Paste your log/textual data here... - output-label-cleaned-version: 'Cleaned version:' + output-label-cleaned-version: "Cleaned version:" sla-calculator: title: SLA calculator description: Service Level Agreement Calcultator @@ -3607,22 +3548,21 @@ tools: title-decoded: Decoded smart-text-replacer: title: Smart Text Replacer and Linebreaker - description: >- - Search and replace a word on single or multiple occurrences just like - windows notepad search and replace. Also allows to manage linebreaking and - text splitting + description: Search and replace a word on single or multiple occurrences just + like windows notepad search and replace. Also allows to manage + linebreaking and text splitting texts: label-add-linebreak-before: Add linebreak before label-add-linebreak-after: Add linebreak after label-add-linebreak-in-place-of: Add linebreak in place of placeholder-enter-text-here: Enter text here... - label-text-to-search-and-replace: 'Text to search and replace:' + label-text-to-search-and-replace: "Text to search and replace:" placeholder-search-regex: Search regex placeholder-replacement-expression: Replacement expression placeholder-split-text-regex: Split text regex - label-split-every-characters: 'Split every characters:' - tag-find-what: 'Find what:' - tag-replace-with: 'Replace with:' + label-split-every-characters: "Split every characters:" + tag-find-what: "Find what:" + tag-replace-with: "Replace with:" tag-find-next: Find Next tag-replace: Replace tag-replace-all: Replace All @@ -3648,28 +3588,28 @@ tools: description: Software Licence compatibility checker and information texts: title-software-licences-compatibility: Software licences compatibility - label-first-license-spdx: 'First License (SPDX):' + label-first-license-spdx: "First License (SPDX):" placeholder-put-your-first-licence-spdx-licence: Put your first licence SPDX licence... - label-second-license-spdx: 'Second License (SPDX):' + label-second-license-spdx: "Second License (SPDX):" placeholder-put-your-second-licence-spdx-licence: Put your second licence SPDX licence... label-licence-infos: Licence infos - label-allowed-permission-s: 'Allowed permission(s):' - label-disallowed-permission-s: 'Disallowed permission(s):' - label-allowed-condition-s: 'Allowed condition(s):' - label-disallowed-condition-s: 'Disallowed condition(s):' - label-allowed-limitation-s: 'Allowed limitation(s):' - label-disallowed-limitation-s: 'Disallowed limitation(s):' - label-select-a-licence: 'Select a licence:' + label-allowed-permission-s: "Allowed permission(s):" + label-disallowed-permission-s: "Disallowed permission(s):" + label-allowed-condition-s: "Allowed condition(s):" + label-disallowed-condition-s: "Disallowed condition(s):" + label-allowed-limitation-s: "Allowed limitation(s):" + label-disallowed-limitation-s: "Disallowed limitation(s):" + label-select-a-licence: "Select a licence:" placeholder-select-a-licence: Select a licence - label-id: 'Id:' - label-title: 'Title:' - label-description: 'Description:' - label-how: 'How:' - label-used-by: 'Used by:' + label-id: "Id:" + label-title: "Title:" + label-description: "Description:" + label-how: "How:" + label-used-by: "Used by:" title-permissions: Permissions title-conditions: Conditions title-limitations: Limitations - label-content: 'Content:' + label-content: "Content:" tag-compatible: Compatible tag-not-compatible: Not compatible stacktrace-prettier: @@ -3690,14 +3630,13 @@ tools: tag-download-as-png: Download as PNG timezone-converter: title: Timezone Converter - description: >- - Convert Date-Time from a timezone to others and get timezone vs countries - infos + description: Convert Date-Time from a timezone to others and get timezone vs + countries infos texts: title-timezones-date-time-converter: Timezones Date-Time Converter label-timezone: Timezone - label-date-time-interval-to-convert: 'Date/time interval to convert:' - label-current-timezone-offset: 'Current Timezone Offset:' + label-date-time-interval-to-convert: "Date/time interval to convert:" + label-current-timezone-offset: "Current Timezone Offset:" label-use-24-hour-time-format: Use 24 hour time format title-date-time-in-other-timezones: Date-Time in other timezones placeholder-please-select-a-timezone: Please select a timezone @@ -3738,7 +3677,7 @@ tools: description: Search in Unicode Characters texts: placeholder-search-unicode-by-name-e-g-zero-width-or-code-point: Search Unicode by name (e.g. 'zero width') or code point... - label-max-results: 'Max results:' + label-max-results: "Max results:" tag-no-results: No results tag-search-result: Search result tag-ucod: UCOD @@ -3749,9 +3688,8 @@ tools: tag-gt-more-info: More info about this character url-cleaner: title: Url Cleaner - description: >- - Clean Ads tracker, UTM, Facebook and other ads provider parameters from an - URL + description: Clean Ads tracker, UTM, Facebook and other ads provider parameters + from an URL texts: title-clean-url: Clean url placeholder-put-your-url-here: Put your url here... @@ -3776,11 +3714,10 @@ tools: placeholder-the-defanged-string-will-be-here: The defanged string will be here url-text-fragment-maker: title: Url Text Search Fragment Maker - description: >- - Create url that allows linking directly to a specific portion of text in a - web document + description: Create url that allows linking directly to a specific portion of + text in a web document texts: - label-base-url: 'Base url:' + label-base-url: "Base url:" placeholder-base-url: Base url... label-start-search-es-comma-separated: Start Search(es) (comma separated) placeholder-start-search-es-comma-separated: Start Search(es) (comma separated)... @@ -3790,8 +3727,8 @@ tools: placeholder-prefix-search: Prefix search label-suffix: Suffix placeholder-suffix-search: Suffix search - label-searchable-url: 'Searchable Url:' - tag-url-with-text-fragments-allows-to-make-link-to-content-that-has-no-anchor-or-id: >- + label-searchable-url: "Searchable Url:" + tag-url-with-text-fragments-allows-to-make-link-to-content-that-has-no-anchor-or-id: Url with Text Fragments allows to make link to content that has no anchor or {'@'}id. tag-see-mdn-for-more-info: See MDN for more info @@ -3811,13 +3748,13 @@ tools: placeholder-put-your-utm-source-here: Put your UTM Source here... label-utm-medium-identifies-what-type-of-link-was-used: UTM Medium (Identifies what type of link was used) placeholder-put-your-utm-medium-here: Put your UTM Medium here... - label-utm-campaign-identifies-a-specific-product-promotion-or-strategic-campaign: >- + label-utm-campaign-identifies-a-specific-product-promotion-or-strategic-campaign: UTM Campaign (Identifies a specific product promotion or strategic campaign) placeholder-put-your-utm-campaign-here: Put your UTM Campaign here... label-utm-content-identifies-search-terms: UTM Content (Identifies search terms) placeholder-put-your-utm-content-here: Put your UTM Content here... - label-utm-term-identifies-what-specifically-was-clicked-to-bring-the-user-to-the-site: >- + label-utm-term-identifies-what-specifically-was-clicked-to-bring-the-user-to-the-site: UTM Term (Identifies what specifically was clicked to bring the user to the site) placeholder-put-your-utm-term-here: Put your UTM Term here... @@ -3906,21 +3843,20 @@ tools: description: Convert between ISO Week number, Week number in month and date texts: title-date-to-week-numbers: Date to Week numbers - label-date: 'Date:' - label-local-week-in-year: 'Local Week in Year:' - label-iso-week-in-year: 'ISO Week (in Year):' - label-week-in-month: 'Week in month:' + label-date: "Date:" + label-local-week-in-year: "Local Week in Year:" + label-iso-week-in-year: "ISO Week (in Year):" + label-week-in-month: "Week in month:" title-iso-week-number-to-date: ISO Week number to date - label-iso-week-number: 'ISO Week number:' - label-year: 'Year:' + label-iso-week-number: "ISO Week number:" + label-year: "Year:" label-first-monday: First Monday title-week-number-in-month-to-date: Week number in month to date - label-month: 'Month:' + label-month: "Month:" wpa-psk-generator: title: WPA PSK generator - description: >- - WPA Pre-shared Key Generator to convert a WPA passphrase and SSID to the - 256-bit pre-shared ("raw") key + description: WPA Pre-shared Key Generator to convert a WPA passphrase and SSID + to the 256-bit pre-shared ("raw") key texts: message-ssid-must-not-be-empty: SSID must not be empty. title-wifi-infos: Wifi Infos @@ -3934,7 +3870,7 @@ tools: title: X-VR-SpamCause Decoder description: Decode X-VR-SPAMCAUSE header in OVH mails texts: - label-encoded-x-vr-spamcause: 'Encoded X-VR-SPAMCAUSE:' + label-encoded-x-vr-spamcause: "Encoded X-VR-SPAMCAUSE:" placeholder-your-x-vr-spamcause-header-value: Your X-VR-SPAMCAUSE header value... label-decoded: Decoded x509-certificate-generator: @@ -3942,32 +3878,32 @@ tools: description: Generate a self signed SSL/x509 certificate texts: message-common-name-domain-name-must-not-be-empty: Common Name/Domain Name must not be empty - label-common-name-domain-name: 'Common Name/Domain Name:' + label-common-name-domain-name: "Common Name/Domain Name:" placeholder-common-domain-name: Common/Domain Name - label-duration-days: 'Duration (days):' + label-duration-days: "Duration (days):" placeholder-duration-days: Duration (days) - label-organization-name: 'Organization Name:' + label-organization-name: "Organization Name:" placeholder-organization-name: Organization Name - label-organizational-unit: 'Organizational Unit:' + label-organizational-unit: "Organizational Unit:" placeholder-organization-unit: Organization Unit - label-state: 'State:' + label-state: "State:" placeholder-state: State - label-city: 'City:' + label-city: "City:" placeholder-city: City - label-country: 'Country:' + label-country: "Country:" placeholder-country: Country - label-contact-email: 'Contact Email:' + label-contact-email: "Contact Email:" placeholder-contact-email: Contact Email - label-subject-alternative-names: 'Subject Alternative Names:' + label-subject-alternative-names: "Subject Alternative Names:" placeholder-dns-names-emails-ip-uri: DNS Names, emails, IP, URI... - label-private-key-passphrase: 'Private Key passphrase:' + label-private-key-passphrase: "Private Key passphrase:" placeholder-passphrase: Passphrase tag-refresh-certificate: Refresh Certificate tag-certificate-pem: Certificate (PEM) - tag-fingerprint: 'Fingerprint:' + tag-fingerprint: "Fingerprint:" tag-public-key: Public key tag-private-key: Private key - rsa-bits: 'RSA Bits:' + rsa-bits: "RSA Bits:" xpath-memo: title: XPath Syntax Cheatsheet description: XPath Syntax Cheatsheet @@ -3986,25 +3922,24 @@ tools: tag-xpath-expression-selected-nothing: XPath expression selected nothing cli-command-editor: title: Cli command editor - description: >- - Convert CLI commands with options into an easily editable form and + description: Convert CLI commands with options into an easily editable form and generate the command with command: Command placeholder: Paste command here safelink-decoder: title: Outlook Safelink decoder description: Decode Outlook SafeLink links - input: 'Your input Outlook SafeLink Url:' + input: "Your input Outlook SafeLink Url:" input-placeholder: Your input Outlook SafeLink Url... - output: 'Output decoded URL:' + output: "Output decoded URL:" ascii-text-drawer: title: ASCII Art Text Generator description: Create ASCII art text with many fonts and styles. - text: 'Your text:' + text: "Your text:" placeholder: Your text to draw - output: 'Ascii Art text:' - font: 'Font:' - width: 'Width:' + output: "Ascii Art text:" + font: "Font:" + width: "Width:" loading: Loading font... error: Current settings resulted in error. texts: @@ -4026,11 +3961,10 @@ tools: error: Provided XML is not valid. email-normalizer: title: Email normalizer - description: >- - Normalize email addresses to a standard format for easier comparison. - Useful for deduplication and data cleaning. - input: 'Raw emails to normalize:' - output: 'Normalized emails:' + description: Normalize email addresses to a standard format for easier + comparison. Useful for deduplication and data cleaning. + input: "Raw emails to normalize:" + output: "Normalized emails:" input-placeholder: Put your emails here (one per line)... output-placeholder: Normalized emails will appear here... button: @@ -4040,9 +3974,9 @@ tools: markdown-to-html: title: Markdown to HTML description: Convert Markdown to HTML and allow to print (as PDF) - markdown: 'Your Markdown to convert:' + markdown: "Your Markdown to convert:" markdownInput: Your Markdown content... - html: 'Output HTML:' + html: "Output HTML:" button: print: Print as PDF texts: @@ -4058,9 +3992,8 @@ tools: description: Javascript Regex/Regular Expression cheatsheet age-crypto: title: AGE Cryptography - description: >- - Provides a simple and easy-to-use open-source Age tool for generating - keys, encrypting, and decrypting messages. + description: Provides a simple and easy-to-use open-source Age tool for + generating keys, encrypting, and decrypting messages. texts: title-private-key: Private Key placeholder-your-private-key-will-be-generated-here: Your private key will be generated here. @@ -4097,15 +4030,15 @@ tools: title: ANSI Escape Tester description: Create and test ANSI console escape sequences texts: - label-mode: 'Mode:' - label-foreground: 'Foreground:' - label-background: 'Background:' - label-styles: 'Styles:' - label-decorated-text: 'Decorated text:' + label-mode: "Mode:" + label-foreground: "Foreground:" + label-background: "Background:" + label-styles: "Styles:" + label-decorated-text: "Decorated text:" placeholder-enter-text: Enter text - title-output-ansi-escape-sequence: 'Output ANSI Escape Sequence:' - title-terminal-preview: 'Terminal Preview:' - label-custom-ansi-sequence: 'Custom ANSI Sequence:' + title-output-ansi-escape-sequence: "Output ANSI Escape Sequence:" + title-terminal-preview: "Terminal Preview:" + label-custom-ansi-sequence: "Custom ANSI Sequence:" placeholder-enter-ansi-escape-sequence: Enter ANSI escape sequence tag-basic: Basic tag-256-color: 256-color @@ -4127,11 +4060,11 @@ tools: description: Generate BIMI DNS TXT record texts: title-bimi-dns-record-generator: BIMI DNS Record Generator - label-domain: 'Domain:' + label-domain: "Domain:" placeholder-example-com: example.com - label-logo-url: 'Logo URL:' + label-logo-url: "Logo URL:" placeholder-https-example-com-logo-svg: https://example.com/logo.svg - label-vmc-certificate-url: 'VMC Certificate URL:' + label-vmc-certificate-url: "VMC Certificate URL:" placeholder-https-example-com-vmc-pem: https://example.com/vmc.pem title-generated-bimi-record: Generated BIMI record bmi-calculator: @@ -4141,12 +4074,12 @@ tools: label-metric-kg-m: Metric (kg, m) label-us-lbs-in: US (lbs, in) title-bmi-calculator: BMI Calculator - label-select-units: 'Select Units:' + label-select-units: "Select Units:" placeholder-enter-weight: Enter weight placeholder-enter-height: Enter height title-result: Result - label-bmi: 'BMI:' - label-category: 'Category:' + label-bmi: "BMI:" + label-category: "Category:" citation-generator: title: Citation Generator description: Generate citation of papers/books in MLA or APA format @@ -4154,14 +4087,14 @@ tools: label-apa: APA label-mla: MLA title-citation-generator: Citation Generator - label-authors-in-last-name-first-name-format: 'Authors (in Last Name, First Name format):' + label-authors-in-last-name-first-name-format: "Authors (in Last Name, First Name format):" placeholder-enter-author-name: Enter author name - label-title: 'Title:' + label-title: "Title:" placeholder-e-g-introduction-to-vue-3: e.g. Introduction to Vue 3 - label-publisher: 'Publisher:' + label-publisher: "Publisher:" placeholder-e-g-o-reilly-media: e.g. O'Reilly Media - label-publication-year: 'Publication Year:' - label-url-optional: 'URL (optional):' + label-publication-year: "Publication Year:" + label-url-optional: "URL (optional):" placeholder-e-g-https-example-com: e.g. https://example.com label-citation-style: Citation Style title-generated-citation: Generated Citation @@ -4172,12 +4105,12 @@ tools: texts: title-cookie-parser: Cookie Parser placeholder-enter-cookie-header: Enter cookie header - tag-tip-navigate-to-a-website-to-test-open-f12-console-and-run: 'Tip: Navigate to a website to test, open F12 Console and run' + tag-tip-navigate-to-a-website-to-test-open-f12-console-and-run: "Tip: Navigate to a website to test, open F12 Console and run" tag-window-copy-document-cookie: window.copy(document.cookie) - tag-this-will-copy-the-cookie-string-to-your-clipboard-note-this-will-only-copy-cookies-available-to-javascript-http-only-and-secure-cookies-will-be-omitted: >- - . This will copy the cookie string to your clipboard. Note: This will + tag-this-will-copy-the-cookie-string-to-your-clipboard-note-this-will-only-copy-cookies-available-to-javascript-http-only-and-secure-cookies-will-be-omitted: + ". This will copy the cookie string to your clipboard. Note: This will only copy cookies available to javascript (HTTP only and secure cookies - will be omitted). + will be omitted)." tag-name: Name tag-value: Value tag-no-cookies-found: No cookies found @@ -4186,7 +4119,7 @@ tools: description: Alarm based on time and weekdays expression texts: title-alarm: Alarm - label-alarm-at: 'Alarm at:' + label-alarm-at: "Alarm at:" label-monday: Monday label-tuesday: Tuesday label-wednesday: Wednesday @@ -4217,13 +4150,13 @@ tools: label-file: File label-content: Content title-drag-and-drop-a-csv-file-here-or-click-to-select-a-file: Drag and drop a CSV file here, or click to select a file - label-paste-your-csv-content: 'Paste your CSV Content:' + label-paste-your-csv-content: "Paste your CSV Content:" placeholder-your-csv: Your CSV... label-typed-values: Typed Values label-nestify-a-b-c-to-nested-objects: Nestify ('a.b.c' to nested objects) - label-select-output-format: 'Select output format:' + label-select-output-format: "Select output format:" placeholder-select-format: Select format - label-table-name: 'Table Name:' + label-table-name: "Table Name:" title-converted-data: Converted data tag-convert: Convert label-xlsx: XLSX @@ -4232,17 +4165,17 @@ tools: description: Generate CURL command lines texts: message-invalid-json-string: Invalid JSON string - label-url: 'Url:' + label-url: "Url:" placeholder-enter-url: Enter URL - label-method: 'Method:' - title-json-body: 'JSON Body:' + label-method: "Method:" + title-json-body: "JSON Body:" placeholder-enter-json-body: Enter JSON body - title-form-entries: 'Form entries:' + title-form-entries: "Form entries:" placeholder-key: Key placeholder-value: Value - title-http-headers: 'HTTP Headers:' + title-http-headers: "HTTP Headers:" placeholder-header: Header - title-options: 'Options:' + title-options: "Options:" title-generated-curl-command: Generated curl command tag-json-body: JSON Body tag-multipart-form-data: Multipart Form-Data @@ -4260,27 +4193,27 @@ tools: label-xml: XML message-provided-json-is-not-valid: Provided JSON is not valid. title-fake-data-generator: Fake Data Generator - label-json-template: 'JSON Template:' + label-json-template: "JSON Template:" placeholder-enter-json-template: Enter JSON template... title-faker-method-insertion: Faker Method insertion placeholder-search-faker-method: Search Faker Method - label-number-of-objects-to-generate: 'Number of objects to generate:' + label-number-of-objects-to-generate: "Number of objects to generate:" placeholder-number-of-objects-to-generate: Number of objects to generate label-nestify-handle-nested-objects: Nestify (handle nested objects) - label-locale: 'Locale:' + label-locale: "Locale:" placeholder-search-locale-version: Search locale version - label-select-output-format: 'Select output format:' + label-select-output-format: "Select output format:" placeholder-select-format: Select format - label-table-name: 'Table Name:' + label-table-name: "Table Name:" title-generated-data: Generated data - tag-record: '): Record' + tag-record: "): Record" tag-insert-selected-method: Insert Selected Method tag-generate-fake-data: Generate Fake Data distinct-words: title: Distinct Words description: Extract and count occurences of each unique word in a text texts: - label-text: 'Text:' + label-text: "Text:" placeholder-enter-text: Enter text... title-distinct-words: Distinct words tag-word: Word @@ -4292,15 +4225,15 @@ tools: label-1024-bit-less-secure-but-faster: 1024-bit (Less secure, but faster) label-2048-bit-recommended-for-security: 2048-bit (Recommended for security) label-4096-bit-stronger-security-but-slower: 4096-bit (Stronger security, but slower) - label-domain-name: 'Domain Name:' + label-domain-name: "Domain Name:" placeholder-enter-domain-e-g-example-com: Enter domain (e.g., example.com) - label-selector-unique-name-used-to-distinguish-dkim-records-for-the-same-domain: >- - Selector (Unique name used to distinguish DKIM records for the same - domain): + label-selector-unique-name-used-to-distinguish-dkim-records-for-the-same-domain: + "Selector (Unique name used to distinguish DKIM records for the same + domain):" placeholder-enter-selector-e-g-default: Enter selector (e.g., default) - label-key-size-of-the-rsa-key-used-for-signing-emails: 'Key Size (of the RSA key used for signing emails):' + label-key-size-of-the-rsa-key-used-for-signing-emails: "Key Size (of the RSA key used for signing emails):" placeholder-select-key-size: Select key size - label-passphrase-of-private-key: 'Passphrase (of private key):' + label-passphrase-of-private-key: "Passphrase (of private key):" placeholder-passphrase: Passphrase title-generate-dkim-record: Generate DKIM Record title-rsa-public-key: RSA Public Key @@ -4316,20 +4249,20 @@ tools: label-relaxed-r: Relaxed (r) label-strict-s: Strict (s) title-dmarc-record-generator: DMARC Record Generator - label-domain: 'Domain:' + label-domain: "Domain:" placeholder-example-com: example.com - label-policy: 'Policy:' + label-policy: "Policy:" placeholder-select-policy: Select policy - label-subdomain-policy: 'Subdomain Policy:' - label-percentage-of-emails-subject-to-dmarc-policy-enforcement-0-100: 'Percentage (of emails subject to DMARC policy enforcement (0-100%)):' + label-subdomain-policy: "Subdomain Policy:" + label-percentage-of-emails-subject-to-dmarc-policy-enforcement-0-100: "Percentage (of emails subject to DMARC policy enforcement (0-100%)):" placeholder-enter-percentage: Enter percentage - label-aggregate-email-where-aggregate-dmarc-reports-should-be-sent: 'Aggregate Email (where aggregate DMARC reports should be sent):' + label-aggregate-email-where-aggregate-dmarc-reports-should-be-sent: "Aggregate Email (where aggregate DMARC reports should be sent):" placeholder-admin-example-com: admin{'@'}example.com - label-forensic-email-where-forensic-dmarc-failure-reports-should-be-sent: 'Forensic Email (where forensic DMARC failure reports should be sent):' - label-alignment-spf: 'Alignment (SPF):' + label-forensic-email-where-forensic-dmarc-failure-reports-should-be-sent: "Forensic Email (where forensic DMARC failure reports should be sent):" + label-alignment-spf: "Alignment (SPF):" placeholder-select-alignment: Select alignment - label-alignment-dkim: 'Alignment (DKIM):' - label-reporting-interval-for-sending-dmarc-aggregate-reports: 'Reporting Interval (for sending DMARC aggregate reports):' + label-alignment-dkim: "Alignment (DKIM):" + label-reporting-interval-for-sending-dmarc-aggregate-reports: "Reporting Interval (for sending DMARC aggregate reports):" placeholder-enter-interval: Enter interval title-generated-dmarc-record: Generated DMARC Record tag-seconds: seconds @@ -4347,12 +4280,12 @@ tools: label-xml: XML title-xlsx-converter: XLSX Converter title-drag-and-drop-a-xlsx-here-or-click-to-select-a-file: Drag and drop a XLSX here, or click to select a file - label-select-sheet-to-use: 'Select Sheet to use:' + label-select-sheet-to-use: "Select Sheet to use:" placeholder-select-sheet: Select sheet - label-select-output-format: 'Select output format:' + label-select-output-format: "Select output format:" placeholder-select-format: Select format label-nestify-a-b-c-to-nested-objects: Nestify ('a.b.c' to nested objects) - label-table-name: 'Table Name:' + label-table-name: "Table Name:" title-converted-data: Converted data tag-convert: Convert firewalld-generator: @@ -4368,27 +4301,27 @@ tools: label-public: Public label-home: Home label-work: Work - label-yes: 'Yes' - label-no: 'No' - label-zone: 'Zone:' - label-action: 'Action:' - label-rule-type: 'Rule Type:' - label-value: 'Value:' + label-yes: Yes + label-no: No + label-zone: "Zone:" + label-action: "Action:" + label-rule-type: "Rule Type:" + label-value: "Value:" placeholder-enter-the-service-port-protocol: Enter the service/port/protocol label-permanent: Permanent - title-generated-fw-command: 'Generated fw command:' + title-generated-fw-command: "Generated fw command:" tag-const-zone-ref: const zone = ref tooltip-remove: Remove from this list fortune-wheel: title: Fortune wheel description: A configurable fortune wheel texts: - label-spin-duration-seconds: 'Spin Duration (seconds):' + label-spin-duration-seconds: "Spin Duration (seconds):" placeholder-enter-wheel-option: Enter wheel option title-move-up: Move up title-move-down: Move down title-remove: Remove - tag-0-recentindex: '= 0 && recentIndex' + tag-0-recentindex: = 0 && recentIndex tag-add-new-option: Add New Option tag-add-option: Add Option tag-clear-all-options: Clear All Options @@ -4408,23 +4341,23 @@ tools: label-no-check: No check label-root-filesystem-first: Root filesystem first label-other-filesystems-after-root: Other filesystems after root - label-device: 'Device:' + label-device: "Device:" placeholder-dev-sda1-or-uuid-or-server-path: /dev/sda1 or UUID=... or server:/path - label-mount-point: 'Mount Point:' + label-mount-point: "Mount Point:" placeholder-mnt-data-or-home: /mnt/data or /home - label-filesystem-type: 'Filesystem Type:' - label-filesystem-options: 'Filesystem options:' - placeholder-by-default-standard-mount-options-rw-suid-dev-exec-auto-nouser-async: >- - By default: Standard mount options (rw, suid, dev, exec, auto, nouser, - async) - label-dump-determines-whether-the-dump-utility-should-back-up-this-filesystem: >- - Dump (Determines whether the 'dump' utility should back up this - filesystem): - label-pass-controls-the-order-for-filesystem-checks-at-boot: 'Pass (Controls the order for filesystem checks at boot):' + label-filesystem-type: "Filesystem Type:" + label-filesystem-options: "Filesystem options:" + placeholder-by-default-standard-mount-options-rw-suid-dev-exec-auto-nouser-async: + "By default: Standard mount options (rw, suid, dev, exec, auto, nouser, + async)" + label-dump-determines-whether-the-dump-utility-should-back-up-this-filesystem: + "Dump (Determines whether the 'dump' utility should back up this + filesystem):" + label-pass-controls-the-order-for-filesystem-checks-at-boot: "Pass (Controls the order for filesystem checks at boot):" placeholder-username: Username - label-username: 'Username:' + label-username: "Username:" placeholder-password: Password - label-password: 'Password:' + label-password: "Password:" title-generated-etc-fstab-line: Generated /etc/fstab line git-semantic-commit-memo: title: Git Semantic Commit Cheatsheet @@ -4451,22 +4384,22 @@ tools: placeholder-old-path: Old Path placeholder-new-path: New Path title-cache-settings: Cache Settings - label-cache-extensions: 'Cache Extensions:' + label-cache-extensions: "Cache Extensions:" placeholder-js-css-png: js, css, png label-cache-duration: Cache Duration - label-cache-type: 'Cache Type:' + label-cache-type: "Cache Type:" label-must-revalidate: Must Revalidate title-password-protection: Password Protection - label-path-to-protect: 'Path to protect:' + label-path-to-protect: "Path to protect:" placeholder-path-to-protect: Path to protect - label-htpasswd-file-path: '.htpasswd file path:' + label-htpasswd-file-path: ".htpasswd file path:" placeholder-htpasswd-file-path: .htpasswd file path title-prevent-hotlinking: Prevent Hotlinking - label-referring-url: 'Referring URL:' + label-referring-url: "Referring URL:" placeholder-the-domain-that-is-hotlinking-to-you: The domain that is hotlinking to you. - label-file-extension: 'File Extension:' + label-file-extension: "File Extension:" placeholder-extensions: Extensions - label-no-hotlinking-image: 'No hotlinking Image:' + label-no-hotlinking-image: "No hotlinking Image:" placeholder-href: Href title-custom-error-pages: Custom Error Pages placeholder-error-code: Error Code @@ -4475,7 +4408,7 @@ tools: placeholder-select-authorization: Select authorization placeholder-ip-address: IP Address title-directory-settings: Directory Settings - label-default-directory-page: 'Default Directory Page:' + label-default-directory-page: "Default Directory Page:" placeholder-default-directory-page: Default Directory Page label-prevent-directory-listing: Prevent Directory Listing title-other-settings: Other Settings @@ -4487,8 +4420,8 @@ tools: description: Minify HTML content texts: placeholder-your-html-content: Your HTML content... - label-your-html-to-minify-can-paste-from-clipboard: 'Your HTML to minify (can paste from clipboard):' - label-output-minified-html: 'Output minified HTML:' + label-your-html-to-minify-can-paste-from-clipboard: "Your HTML to minify (can paste from clipboard):" + label-output-minified-html: "Output minified HTML:" iptables-generator: title: Iptables Generator description: Generate iptables command lines @@ -4504,14 +4437,14 @@ tools: label-output: OUTPUT label-forward: FORWARD label-prerouting: PREROUTING - label-action: 'Action:' - label-protocol: 'Protocol:' - label-source-ip: 'Source IP:' - label-destination-ip: 'Destination IP:' - label-source-port: 'Source Port:' - label-destination-port: 'Destination Port:' - label-chain: 'Chain:' - label-rule-order: 'Insert position (empty = append):' + label-action: "Action:" + label-protocol: "Protocol:" + label-source-ip: "Source IP:" + label-destination-ip: "Destination IP:" + label-source-port: "Source Port:" + label-destination-port: "Destination Port:" + label-chain: "Chain:" + label-rule-order: "Insert position (empty = append):" title-generated-iptables-command: Generated iptables command tag-expression: Expression tag-meaning: Meaning @@ -4529,10 +4462,10 @@ tools: tag-delete-the-second-rule-in-the-nat-table: Delete the second rule in the NAT table tag-iptables-a-input-s-lt-ip-address-gt-j-drop: iptables -A INPUT -s "<ip address>" -j DROP tag-block-a-specific-ip-address: Block a specific IP address - tag-iptables-a-input-p-tcp-dport-80-m-limit-limit-25-minute-limit-burst-100-j-accept: >- + tag-iptables-a-input-p-tcp-dport-80-m-limit-limit-25-minute-limit-burst-100-j-accept: iptables -A INPUT -p tcp --dport 80 -m limit --limit 25/minute --limit-burst 100 -j ACCEPT - tag-limit-connections-to-25-per-minute-on-port-80-after-100-connections-have-been-reached: >- + tag-limit-connections-to-25-per-minute-on-port-80-after-100-connections-have-been-reached: Limit connections to 25 per minute on port 80, after 100 connections have been reached tag-iptables-n-mychain: iptables -N MYCHAIN @@ -4556,8 +4489,8 @@ tools: message-provided-json-is-not-valid: Provided JSON is not valid. title-json-to-php: JSON to PHP placeholder-put-your-json-string-here: Put your json string here... - label-your-json-object: 'Your JSON object:' - label-root-name: 'Root Name:' + label-your-json-object: "Your JSON object:" + label-root-name: "Root Name:" title-your-php-code: Your PHP code tag-create-getter: Create Getter tag-getter-without-validation: Getter without validation @@ -4569,10 +4502,10 @@ tools: description: Generate Protobuf declaration from JSON objects texts: message-provided-json-is-not-valid: Provided JSON is not valid. - label-root-name: 'Root Name:' + label-root-name: "Root Name:" input-label-your-json: Your JSON input-placeholder-paste-your-json-here: Paste your JSON here... - output-label-protobuf-version-of-your-json-objects: 'ProtoBuf version of your JSON objects:' + output-label-protobuf-version-of-your-json-objects: "ProtoBuf version of your JSON objects:" json-to-python: title: Json to Python description: Convert JSON to Python classes @@ -4580,9 +4513,9 @@ tools: message-provided-json-is-not-valid: Provided JSON is not valid. title-json-to-python: JSON to Python placeholder-put-your-json-string-here: Put your json string here... - label-json-object: 'JSON Object:' - label-root-name: 'Root Name:' - label-python-version: 'Python version:' + label-json-object: "JSON Object:" + label-root-name: "Root Name:" + label-python-version: "Python version:" placeholder-python-version: Python version title-your-python-code: Your Python code tag-classes-only: Classes only @@ -4605,9 +4538,9 @@ tools: texts: message-provided-json-is-not-valid: Provided JSON is not valid. title-json-to-sql-insert: JSON to SQL INSERT - label-table-name: 'Table Name:' + label-table-name: "Table Name:" placeholder-put-your-json-string-here: Put your json string here... - label-json: 'JSON:' + label-json: "JSON:" title-your-sql-insert-code: Your SQL INSERT code json-to-typescript: title: Json to Typescript @@ -4640,21 +4573,21 @@ tools: texts: message-invalid-json-string: Invalid JSON string title-local-key: Local Key - label-local-key: 'Local Key:' + label-local-key: "Local Key:" placeholder-paserk-local-key-k4-local-xxxx: PASERK local key k4.local.xxxx title-encryption: Encryption - label-payload: 'Payload:' + label-payload: "Payload:" placeholder-json-payload: JSON payload label-validate-payload: Validate Payload label-add-exp: Add Exp label-add-iat: Add IAT - label-footer: 'Footer:' + label-footer: "Footer:" placeholder-json-footer: JSON footer - title-generated-paserk-token: 'Generated PASERK Token:' + title-generated-paserk-token: "Generated PASERK Token:" title-decryption: Decryption - label-token: 'Token:' + label-token: "Token:" placeholder-paserk-token: PASERK token - title-decoded-paserk: 'Decoded PASERK:' + title-decoded-paserk: "Decoded PASERK:" tag-refresh-key: Refresh Key paseto-signing: title: Paseto/PASERK Public/Private @@ -4662,32 +4595,32 @@ tools: texts: message-invalid-json-string: Invalid JSON string title-key-pairs: Key Pairs - label-secret-key: 'Secret Key:' + label-secret-key: "Secret Key:" placeholder-paserk-secret-key-k4-secret-xxxx: PASERK secret key k4.secret.xxxx - label-public-key: 'Public Key:' + label-public-key: "Public Key:" placeholder-paserk-public-key-k4-public-xxxx: PASERK public key k4.public.xxxx title-signing: Signing - label-payload: 'Payload:' + label-payload: "Payload:" placeholder-json-payload: JSON payload label-validate-payload: Validate Payload label-add-exp: Add Exp label-add-iat: Add IAT - label-footer: 'Footer:' + label-footer: "Footer:" placeholder-json-footer: JSON footer - title-signed-paserk-token: 'Signed PASERK Token:' + title-signed-paserk-token: "Signed PASERK Token:" title-verifying: Verifying - label-token: 'Token:' + label-token: "Token:" placeholder-paserk-token: PASERK token - title-verification-result: 'Verification result:' + title-verification-result: "Verification result:" tag-refresh-key: Refresh Key pdf-concat: title: Pdf Concatener description: Concatenate PDF into a single one texts: title-drag-and-drop-a-pdf-files-here-or-click-to-select-some-files: Drag and drop a PDF files here, or click to select some files - label-output-file: 'Output file:' + label-output-file: "Output file:" title-files-order: Files order - label-range: 'Range:' + label-range: "Range:" placeholder-qpdf-range: Qpdf Range title-logs: Logs label-qpdf: qpdf @@ -4699,9 +4632,9 @@ tools: description: Extract pages range from a PDF texts: title-drag-and-drop-a-pdf-file-here-or-click-to-select-a-file: Drag and drop a PDF file here, or click to select a file - label-output-file: 'Output file:' + label-output-file: "Output file:" title-extraction-range: Extraction Range - label-range: 'Range:' + label-range: "Range:" placeholder-qpdf-range: Qpdf Range title-logs: Logs label-qpdf: qpdf @@ -4715,27 +4648,26 @@ tools: title-drag-and-drop-a-pdf-file-here-or-click-to-select-a-file: Drag and drop a PDF file here, or click to select a file label-merge-pages: Merge pages title-output: Output - label-file-name: 'File name:' - label-text: 'Text:' - label-total-pages: 'Total Pages:' + label-file-name: "File name:" + label-text: "Text:" + label-total-pages: "Total Pages:" tag-extract-text: Extract text pgp-keygen: title: PGP keygen - description: >- - Generate new random PGP private and public keys (with or without + description: Generate new random PGP private and public keys (with or without passphrase). texts: message-bits-should-be-256-bits-16384-and-be-a-multiple-of-8: Bits should be 256 <= bits <= 16384 and be a multiple of 8 - label-format: 'Format:' + label-format: "Format:" placeholder-select-a-key-format: Select a key format - label-rsa-bits: 'RSA Bits :' - label-user-name: 'User Name :' + label-rsa-bits: "RSA Bits :" + label-user-name: "User Name :" placeholder-user-name: User Name - label-user-email: 'User Email :' + label-user-email: "User Email :" placeholder-user-email: User Email - label-passphrase: 'Passphrase :' + label-passphrase: "Passphrase :" placeholder-passphrase: Passphrase - tag-256-value: '= 256 && value' + tag-256-value: = 256 && value tag-your-browser-is-not-in: Your browser is not in tag-secure-context-https: '"Secure Context" (HTTPS)' tag-this-tool-may-not-work-correctly-and-require-https-to-work-fully: . This tool may not work correctly and require HTTPS to work fully. @@ -4748,17 +4680,16 @@ tools: description: Convert Java .properties file from/to YAML texts: title-properties-to-yaml: .properties to YAML - input-label-your-properties-content: 'Your .properties content:' + input-label-your-properties-content: "Your .properties content:" input-placeholder-paste-your-properties-content-here: Paste your .properties content here... - output-label-yaml-version: 'YAML version:' + output-label-yaml-version: "YAML version:" title-yaml-to-properties: YAML to .properties - input-label-your-yaml-content: 'Your YAML content:' + input-label-your-yaml-content: "Your YAML content:" input-placeholder-paste-your-yaml-content-here: Paste your YAML content here... - output-label-properties-version: '.properties version:' + output-label-properties-version: ".properties version:" punycode-converter: title: Punycode Converter - description: >- - Convert international unicode domain names or emails from/to ASCII + description: Convert international unicode domain names or emails from/to ASCII Punycode version texts: title-punycode-to-international: Punycode to International @@ -4797,19 +4728,19 @@ tools: label-delete: Delete label-update: Update title-rsync-command-generator: Rsync Command Generator - label-source-type: 'Source Type:' - label-source: 'Source:' + label-source-type: "Source Type:" + label-source: "Source:" placeholder-enter-source-directory: Enter source directory - label-source-ssh-host: 'Source SSH Host:' + label-source-ssh-host: "Source SSH Host:" placeholder-enter-ssh-host: Enter SSH host - label-source-ssh-username: 'Source SSH Username:' + label-source-ssh-username: "Source SSH Username:" placeholder-enter-ssh-username-optional: Enter SSH username (optional) - label-destination-type: 'Destination Type:' - label-destination: 'Destination:' + label-destination-type: "Destination Type:" + label-destination: "Destination:" placeholder-enter-destination-directory: Enter destination directory - label-destination-ssh-host: 'Destination SSH Host:' - label-destination-ssh-username: 'Destination SSH Username:' - label-options: 'Options:' + label-destination-ssh-host: "Destination SSH Host:" + label-destination-ssh-username: "Destination SSH Username:" + label-options: "Options:" title-generated-rsync-command: Generated rsync command tag-local: Local tag-remote: Remote @@ -4818,7 +4749,7 @@ tools: description: Minify SQL queries texts: title-sql-minifier: SQL Minifier - label-sql-query: 'SQL Query:' + label-sql-query: "SQL Query:" placeholder-enter-sql-query: Enter SQL query... title-minified-sql-query: Minified SQL Query string-escaper: @@ -4826,9 +4757,9 @@ tools: description: Escape string to code language version texts: title-string-escaper: String Escaper - label-your-text: 'Your text:' + label-your-text: "Your text:" placeholder-your-raw-text-to-escape: Your raw text to escape - label-target-language: 'Target language:' + label-target-language: "Target language:" title-your-escaped-string-in-target-language: Your escaped string in target language tag-single-linize: Single linize tcpdump-generator: @@ -4845,70 +4776,69 @@ tools: label-delta-micro-second-resolution-between-current-and-previous-line-ttt: Delta (micro-second resolution) between current and previous line (-ttt) label-current-time-with-date-yyyy-mm-dd-hh-mm-ss-microsecond-tttt: Current time with date (YYYY-MM-DD HH:MM:SS.microsecond) (-tttt) label-delta-micro-second-resolution-between-current-and-first-line-ttttt: Delta (micro-second resolution) between current and first line (-ttttt) - label-interface: 'Interface:' + label-interface: "Interface:" placeholder-e-g-eth0: e.g., eth0 - label-source-host: 'Source Host:' + label-source-host: "Source Host:" placeholder-e-g-192-168-1-1: e.g., 192.168.1.1 - label-destination-host: 'Destination Host:' + label-destination-host: "Destination Host:" placeholder-e-g-192-168-1-2: e.g., 192.168.1.2 - label-source-port: 'Source Port:' + label-source-port: "Source Port:" placeholder-e-g-443: e.g., 443 - label-destination-port: 'Destination Port:' + label-destination-port: "Destination Port:" placeholder-e-g-80: e.g., 80 - label-packet-limit: 'Packet Limit:' + label-packet-limit: "Packet Limit:" placeholder-e-g-100: e.g., 100 - label-disable-dns-resolution: 'Disable DNS Resolution:' - label-print-link-level-header: 'Print Link-Level Header:' - label-quick-print: 'Quick Print:' - label-verbosity-level: 'Verbosity Level:' - label-time-format: 'Time Format:' - label-write-to-file: 'Write to File:' + label-disable-dns-resolution: "Disable DNS Resolution:" + label-print-link-level-header: "Print Link-Level Header:" + label-quick-print: "Quick Print:" + label-verbosity-level: "Verbosity Level:" + label-time-format: "Time Format:" + label-write-to-file: "Write to File:" placeholder-e-g-capture-pcap: e.g., capture.pcap - label-custom-expression: 'Custom Expression:' + label-custom-expression: "Custom Expression:" placeholder-e-g-src-port-443-and-dst-10-0-0-1: e.g., src port 443 and dst 10.0.0.1 title-generated-tcpdump-command: Generated tcpdump command - tag-tcpdump-is-a-utility-commonly-installed-available-to-many-linux-distributions-to-quickly-gather-a-network-trace-packet-capture-in-short-it-s-the-wireshark-of-linux-to-gathering-packet-captures-tcpdump-is-very-versatile-with-many-switches-to-granularly-capture-what-you-need-to-dubug-network-traffic-with-options-to-output-results-via-console-file-or-wireshark-pcap: >- + tag-tcpdump-is-a-utility-commonly-installed-available-to-many-linux-distributions-to-quickly-gather-a-network-trace-packet-capture-in-short-it-s-the-wireshark-of-linux-to-gathering-packet-captures-tcpdump-is-very-versatile-with-many-switches-to-granularly-capture-what-you-need-to-dubug-network-traffic-with-options-to-output-results-via-console-file-or-wireshark-pcap: tcpdump is a utility commonly installed / available to many Linux distributions to quickly gather a network trace / packet capture. In short, it's the wireshark of linux to gathering packet captures. tcpdump is very versatile with many switches to granularly capture what you need to dubug network traffic; with options to output results via console, file, or wireshark pcap. - tag-this-utility-is-to-help-generate-a-tcpdump-command-using-some-of-the-more-common-switches-filters-offered-by-the-tcpdump-this-utility-is-not-encompassing-of-all-options-tcpdump-offers-a-complete-list-of-options-can-be-found-via-its-manual-nbsp: >- + tag-this-utility-is-to-help-generate-a-tcpdump-command-using-some-of-the-more-common-switches-filters-offered-by-the-tcpdump-this-utility-is-not-encompassing-of-all-options-tcpdump-offers-a-complete-list-of-options-can-be-found-via-its-manual-nbsp: This utility is to help generate a tcpdump command using some of the more common switches / filters offered by the tcpdump. This utility is not encompassing of all options tcpdump offers; a complete list of options can be found via its manual:  tag-https-www-tcpdump-org-manpages-tcpdump-1-html: https://www.tcpdump.org/manpages/tcpdump.1.html - tag-note: 'Note:' - tag-nbsp-host-source-host-and-destination-host-can-take-multiple-entries-separate-your-entries-with-a-comma-space-or-semicolon: >- -  Host, Source Host, and Destination Host can take multiple entries. - Separate your entries with a comma, space, or semicolon. - tag-note-2: 'Note 2:' - tag-nbsp-when-you-specify-a-source-src-or-destination-dst-flags-tcpdump-will-only-filter-in-that-direction-if-you-are-looking-to-capture-full-tcp-handshake-make-sure-you-use-host-vs-src-host-or-dst-host-to-see-both-request-and-response-flow: >- -  When you specify a source (src) or destination (dst) flags, + tag-note: "Note:" + tag-nbsp-host-source-host-and-destination-host-can-take-multiple-entries-separate-your-entries-with-a-comma-space-or-semicolon: + " Host, Source Host, and Destination Host can take multiple + entries. Separate your entries with a comma, space, or semicolon." + tag-note-2: "Note 2:" + tag-nbsp-when-you-specify-a-source-src-or-destination-dst-flags-tcpdump-will-only-filter-in-that-direction-if-you-are-looking-to-capture-full-tcp-handshake-make-sure-you-use-host-vs-src-host-or-dst-host-to-see-both-request-and-response-flow: + ' When you specify a source (src) or destination (dst) flags, tcpdump will only filter in that direction. If you are looking to capture full TCP handshake, make sure you use "host" vs "src host" or - "dst host" to see both request and response flow. + "dst host" to see both request and response flow.' tag-the-network-interface-to-capture-packets-from: The network interface to capture packets from. tag-capture-packets-originating-from-this-host: Capture packets originating from this host. tag-capture-packets-destined-for-this-host: Capture packets destined for this host. tag-filter-packets-from-this-source-port: Filter packets from this source port. tag-filter-packets-going-to-this-destination-port: Filter packets going to this destination port. tag-stop-capturing-after-this-number-of-packets: Stop capturing after this number of packets. - tag-n: '-n' + tag-n: -n tag-prevent-resolving-ips-to-hostnames: Prevent resolving IPs to hostnames. - tag-e: '-e' + tag-e: -e tag-display-link-layer-headers-in-output: Display link-layer headers in output. - tag-q: '-q' + tag-q: -q tag-show-less-verbose-packet-information: Show less verbose packet information. tag-save-captured-packets-to-a-file: Save captured packets to a file. tag-advanced-filters-for-packet-selection: Advanced filters for packet selection. text-to-unicode-names: title: Text to Unicode Names - description: >- - Convert a text to its hexadecimal character codes and Unicode Names for - each character + description: Convert a text to its hexadecimal character codes and Unicode Names + for each character texts: title-text-to-unicode-names: Text to Unicode Names placeholder-e-g-hello-world: e.g. 'Hello world' @@ -4920,7 +4850,7 @@ tools: description: Alarm at a specific date and time texts: title-alarm: Alarm - label-alarm-at: 'Alarm at:' + label-alarm-at: "Alarm at:" title-timer-finished: Timer finished title-history: History tag-start: Start @@ -4930,30 +4860,29 @@ tools: tag-stop: Stop traefik-compose-maker: title: Traefik Docker Compose Maker - description: >- - Create a docker compose with Traefik labels ready for a given service and - options + description: Create a docker compose with Traefik labels ready for a given + service and options texts: title-traefik-docker-compose-generator: Traefik Docker Compose Generator - label-proxied-service-name: 'Proxied Service Name:' + label-proxied-service-name: "Proxied Service Name:" placeholder-enter-service-name: Enter service name - label-proxied-service-image: 'Proxied Service Image:' + label-proxied-service-image: "Proxied Service Image:" placeholder-enter-image-name: Enter image name - label-proxied-service-host-name: 'Proxied Service Host Name:' + label-proxied-service-host-name: "Proxied Service Host Name:" placeholder-enter-service-hostname: Enter service hostname - label-proxied-service-load-balancer-port: 'Proxied Service Load Balancer Port:' + label-proxied-service-load-balancer-port: "Proxied Service Load Balancer Port:" placeholder-enter-port: Enter port label-enable-load-balancer: Enable Load Balancer - label-cert-resolver-name: 'Cert Resolver Name:' + label-cert-resolver-name: "Cert Resolver Name:" placeholder-enter-cert-resolver-name: Enter cert resolver name - label-postmaster-email: 'Postmaster Email:' + label-postmaster-email: "Postmaster Email:" placeholder-enter-email: Enter email label-let-s-encrypt-test-mode: Let's Encrypt Test Mode label-enable-dashboard: Enable Dashboard label-log-level-debug: Log Level (DEBUG) - label-traefik-dashboard-host-name: 'Traefik Dashboard Host Name:' + label-traefik-dashboard-host-name: "Traefik Dashboard Host Name:" placeholder-enter-dashboard-host-name: Enter dashboard host name - label-dashboard-user-and-password: 'Dashboard User and Password:' + label-dashboard-user-and-password: "Dashboard User and Password:" placeholder-user-password: User:Password title-generated-compose-entry: Generated Compose Entry vim-memo: @@ -4973,13 +4902,12 @@ tools: input-placeholder-paste-your-raw-html-here: Paste your raw HTML here... output-label-text-from-your-html: Text from your HTML title: Extract text from HTML - description: >- - Paste your HTML in the input form on the left and you will get text - instantly. Occasionally, you may need to extract plain text from an HTML - page where CSS properties (like user-select: none;) prevent text + description: 'Paste your HTML in the input form on the left and you will get + text instantly. Occasionally, you may need to extract plain text from an + HTML page where CSS properties (like user-select: none;) prevent text selection. The typical workaround involves using the DevTools (F12) to select "Copy → outer HTML". The proposed tool would simplify this process - by extracting the "inner Text" directly from the copied HTML. + by extracting the "inner Text" directly from the copied HTML.' otp-code-generator-and-validator: texts: message-secret-should-be-a-base32-string: Secret should be a base32 string @@ -4993,10 +4921,10 @@ tools: placeholder-hotp-will-be-displayed-here: HOTP will be displayed here label-epoch: Epoch placeholder-epoch-in-sec-will-be-displayed-here: Epoch in sec will be displayed here - label-count: 'Count:' + label-count: "Count:" placeholder-iteration-count-will-be-displayed-here: Iteration count will be displayed here placeholder-iteration-count-in-hex-will-be-displayed-here: Iteration count in hex will be displayed here - label-padded-hex: 'Padded hex:' + label-padded-hex: "Padded hex:" tag-open-key-uri-in-new-tab: Open Key URI in new tab tag-iteration: Iteration tag-previous: Previous @@ -5026,28 +4954,27 @@ tools: label-wep: WEP label-wpa2-eap: WPA2-EAP label-encryption-method: Encryption method - label-ssid: 'SSID:' + label-ssid: "SSID:" placeholder-your-wifi-ssid: Your WiFi SSID... - label-password: 'Password:' + label-password: "Password:" placeholder-your-wifi-password: Your WiFi Password... label-eap-method: EAP method - label-identity: 'Identity:' + label-identity: "Identity:" placeholder-your-eap-identity: Your EAP Identity... label-eap-phase-2-method: EAP Phase 2 method - label-foreground-color: 'Foreground color:' - label-background-color: 'Background color:' + label-foreground-color: "Foreground color:" + label-background-color: "Background color:" tag-hidden-ssid: Hidden SSID tag-anonymous: Anonymous? tag-download-qr-code: Download qr-code tag-copy-connection-string: Copy connection string url-parser: title: URL parser - description: >- - Parse a URL into its separate constituent parts (protocol, origin, params, - port, username-password, ...) + description: Parse a URL into its separate constituent parts (protocol, origin, + params, port, username-password, ...) texts: message-invalid-url: Invalid url - label-your-url-to-parse: 'Your url to parse:' + label-your-url-to-parse: "Your url to parse:" placeholder-your-url-to-parse: Your url to parse... url-must-have-http-or-https-prefix: Url must have http:// or https:// prefix button-open-url: Open URL @@ -5059,16 +4986,16 @@ tools: tested: Tested keys will be shown in green title: Instructions keys: Keys - layout: 'Keyboard Layout:' + layout: "Keyboard Layout:" legend: pressed: Pressed tested: Tested untested: Untested progress: Test Progress reset: Reset - size: 'Keyboard Size:' + size: "Keyboard Size:" sizes: - '60': 60% Compact + "60": 60% Compact full: Full Size (100%) tkl: TKL (80%) texts: @@ -5076,6 +5003,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Keyboard Tester + description: Test your keyboard keys and check if all keys are working properly. + Visual feedback for each key press with support for different keyboard + layouts. + externalAccess: "null" text-to-binary: title: Text to UTF-8 binary description: Convert text to its UTF-8 binary representation and vice-versa. @@ -5085,7 +5017,7 @@ tools: label-octal: Octal label-decimal: Decimal label-hexadecimal: Hexadecimal - label-conversion-base: 'Conversion Base:' + label-conversion-base: "Conversion Base:" title-text-to-utf-8-binary: Text to UTF-8 binary placeholder-e-g-hello-world: e.g. 'Hello world' label-enter-text-to-convert-to-binary: Enter text to convert to binary @@ -5107,12 +5039,12 @@ tools: texts: label-file: File label-content: Content - title-drag-and-drop-a-pem-der-jks-or-pkcs-12-file-here-or-click-to-select-a-file: >- + title-drag-and-drop-a-pem-der-jks-or-pkcs-12-file-here-or-click-to-select-a-file: Drag and drop a PEM, DER, JKS or PKCS#12 file here, or click to select a file - label-paste-your-certificate-store: 'Paste your Certificate/Store:' + label-paste-your-certificate-store: "Paste your Certificate/Store:" placeholder-your-certificate-store: Your Certificate/Store... - label-passphrase-for-encrypted-certificate-store: 'Passphrase (for encrypted certificate/store):' + label-passphrase-for-encrypted-certificate-store: "Passphrase (for encrypted certificate/store):" placeholder-passphrase-for-encrypted-certificate-store: Passphrase (for encrypted certificate/store)... label-key-pem: Key (PEM) label-certificate-pem: Certificate (PEM) @@ -5124,10 +5056,9 @@ tools: unable-to-get-private-key: Unable to get private key. sip-auth: title: SIP Authorization - description: >- - This tool helps you to verify the SIP authorization header. The tool - performs all calculations in the browser and does not transmit sensitive - information over the network, so feel free to use it. + description: This tool helps you to verify the SIP authorization header. The + tool performs all calculations in the browser and does not transmit + sensitive information over the network, so feel free to use it. password: SIP password password-tips: Enter a password... message: SIP message @@ -5142,8 +5073,8 @@ tools: description: Decode sharepoint.com share urls to "normal" Sharepoint Url texts: placeholder-your-input-sharepoint-url: Your input SharePoint Url... - label-your-input-sharepoint-url: 'Your input SharePoint Url:' - label-output-decoded-url: 'Output decoded URL:' + label-your-input-sharepoint-url: "Your input SharePoint Url:" + label-output-decoded-url: "Output decoded URL:" text: invalid-sharepoint-url-provided: Invalid SharePoint URL provided safelin-decoder: @@ -5151,27 +5082,25 @@ tools: invalid-safelinks-url-provided: Invalid SafeLinks URL provided mac-address-generator: title: MAC address generator - description: >- - Enter the quantity and prefix. MAC addresses will be generated in your - chosen case (uppercase or lowercase) + description: Enter the quantity and prefix. MAC addresses will be generated in + your chosen case (uppercase or lowercase) texts: label-uppercase: Uppercase label-lowercase: Lowercase label-: . text-mac-addresses-copied-to-the-clipboard: MAC addresses copied to the clipboard - label-mac-address-prefix: 'MAC address prefix:' + label-mac-address-prefix: "MAC address prefix:" placeholder-set-a-prefix-e-g-64-16-7f: Set a prefix, e.g. 64:16:7F - label-case: 'Case:' - label-separator: 'Separator:' - tag-quantity: 'Quantity:' + label-case: "Case:" + label-separator: "Separator:" + tag-quantity: "Quantity:" tag-refresh: Refresh tag-copy: Copy label-none: None raid-calculator: title: RAID Calculator - description: >- - Calculate storage capacity, fault tolerance and space efficiency of an - array based on the number of disks, size, and RAID type + description: Calculate storage capacity, fault tolerance and space efficiency of + an array based on the number of disks, size, and RAID type texts: label-mb: MB label-gb: GB @@ -5187,11 +5116,11 @@ tools: label-raid-60-double-parity-stripe: RAID 60 (double parity + stripe) label-raid-70-triple-parity-stripe: RAID 70 (triple parity + stripe) label-number-of-disks: Number of disks - placeholder-number-of-disks-ex-2: 'Number of disks (ex: 2)' + placeholder-number-of-disks-ex-2: "Number of disks (ex: 2)" label-disk-size: Disk size - placeholder-disk-size-ex-100: 'Disk size (ex: 100)' + placeholder-disk-size-ex-100: "Disk size (ex: 100)" label-disks-per-stripe: Disks per stripe - placeholder-number-of-disks-per-stripe-ex-3: 'Number of disks per stripe (ex: 3)' + placeholder-number-of-disks-per-stripe-ex-3: "Number of disks per stripe (ex: 3)" label-raid-type: RAID Type title-results: Results tag-for-more-information-on-raid-types-see: For more information on RAID types, see @@ -5201,61 +5130,61 @@ tools: tag-fault-tolerance: Fault Tolerance tag-space-efficiency: Space Efficiency text: - num-1-drive-failures: '{0} drive failures' + num-1-drive-failures: "{0} drive failures" service: text: 3-drive-failures-per-raid-7-set: 3 drive failures per RAID 7 set - raid-70-requires-at-least-10-disks-with-5-minimum-per-stripe-stripes-must-contain-an-equal-number-of-disks: >- + raid-70-requires-at-least-10-disks-with-5-minimum-per-stripe-stripes-must-contain-an-equal-number-of-disks: RAID 70 requires at least 10 disks with 5 minimum per stripe. Stripes must contain an equal number of disks. - raid-70-stripes-multiple-raid-7-arrays-together-raid-7-raid-0-each-raid-7-set-can-sustain-three-drive-failures: >- + raid-70-stripes-multiple-raid-7-arrays-together-raid-7-raid-0-each-raid-7-set-can-sustain-three-drive-failures: RAID 70 stripes multiple RAID 7 arrays together (RAID 7 + RAID 0). Each RAID 7 set can sustain three drive failures. 2-drive-failures-per-raid-6-set: 2 drive failures per RAID 6 set - raid-60-requires-at-least-8-disks-with-4-minimum-per-stripe-stripes-must-contain-an-equal-number-of-disks: >- + raid-60-requires-at-least-8-disks-with-4-minimum-per-stripe-stripes-must-contain-an-equal-number-of-disks: RAID 60 requires at least 8 disks with 4 minimum per stripe. Stripes must contain an equal number of disks. - raid-60-stripes-multiple-raid-6-arrays-together-raid-6-raid-0-each-raid-6-set-can-sustain-two-drive-failures: >- + raid-60-stripes-multiple-raid-6-arrays-together-raid-6-raid-0-each-raid-6-set-can-sustain-two-drive-failures: RAID 60 stripes multiple RAID 6 arrays together (RAID 6 + RAID 0). Each RAID 6 set can sustain two drive failures. 1-drive-failure-per-raid-5-set: 1 drive failure per RAID 5 set - raid-50-requires-at-least-6-disks-with-3-minimum-per-stripe-stripes-must-contain-an-equal-number-of-disks: >- + raid-50-requires-at-least-6-disks-with-3-minimum-per-stripe-stripes-must-contain-an-equal-number-of-disks: RAID 50 requires at least 6 disks with 3 minimum per stripe. Stripes must contain an equal number of disks. - raid-50-stripes-multiple-raid-5-arrays-together-raid-5-raid-0-each-raid-5-set-can-sustain-a-single-drive-failure: >- + raid-50-stripes-multiple-raid-5-arrays-together-raid-5-raid-0-each-raid-5-set-can-sustain-a-single-drive-failure: RAID 50 stripes multiple RAID 5 arrays together (RAID 5 + RAID 0). Each RAID 5 set can sustain a single drive failure. 1-drive-failure-per-mirrored-set: 1 drive failure per mirrored set raid-10-requires-an-even-number-of-at-least-4-disks: RAID 10 requires an even number of at least 4 disks - raid-10-is-a-stripe-of-mirrors-raid-1-raid-0-each-set-of-drives-is-mirrored-and-striped-together-so-that-each-drive-in-the-set-is-fault-tolerant-within-the-group: >- + raid-10-is-a-stripe-of-mirrors-raid-1-raid-0-each-set-of-drives-is-mirrored-and-striped-together-so-that-each-drive-in-the-set-is-fault-tolerant-within-the-group: RAID 10 is a stripe of mirrors (RAID 1 + RAID 0). Each set of drives is mirrored and striped together so that each drive in the set is fault tolerant within the group. 3-drive-failures: 3 drive failures raid-7-requires-at-least-5-disks: RAID 7 requires at least 5 disks - raid-7-raid-tp-non-standard-is-similiar-to-raid-5-and-raid-6-but-with-a-third-parity-block-this-allows-for-a-third-disk-failure-at-the-cost-of-storage-reduction-equal-to-three-drives: >- + raid-7-raid-tp-non-standard-is-similiar-to-raid-5-and-raid-6-but-with-a-third-parity-block-this-allows-for-a-third-disk-failure-at-the-cost-of-storage-reduction-equal-to-three-drives: RAID 7/RAID TP (non-standard) is similiar to RAID 5 and RAID 6 but with a third parity block. This allows for a third disk failure at the cost of storage reduction equal to three drives. 2-drive-failures: 2 drive failures raid-6-requires-at-least-4-disks: RAID 6 requires at least 4 disks - raid-6-is-similiar-to-raid-5-but-with-an-additional-parity-block-this-allows-for-an-additional-disk-failure-at-the-cost-of-storage-reduction-equal-to-two-drives: >- + raid-6-is-similiar-to-raid-5-but-with-an-additional-parity-block-this-allows-for-an-additional-disk-failure-at-the-cost-of-storage-reduction-equal-to-two-drives: RAID 6 is similiar to RAID 5 but with an additional parity block. This allows for an additional disk failure at the cost of storage reduction equal to two drives. 1-drive-failure: 1 drive failure raid-5-requires-at-least-3-disks: RAID 5 requires at least 3 disks - raid-5-uses-block-level-striping-with-parity-this-allows-for-fault-tolerance-with-a-storage-reduction-equal-to-one-drive-for-the-parity-information: >- + raid-5-uses-block-level-striping-with-parity-this-allows-for-fault-tolerance-with-a-storage-reduction-equal-to-one-drive-for-the-parity-information: RAID 5 uses block level striping with parity. This allows for fault tolerance with a storage reduction equal to one drive for the parity information. raid-1-requires-at-least-1-disk: RAID 1 requires at least 1 disk - raid-1-consists-of-an-exact-copy-of-the-data-mirror-across-two-or-more-disks-the-array-will-operate-as-long-as-at-least-one-drive-is-operational: >- + raid-1-consists-of-an-exact-copy-of-the-data-mirror-across-two-or-more-disks-the-array-will-operate-as-long-as-at-least-one-drive-is-operational: RAID 1 consists of an exact copy of the data (mirror) across two or more disks. The array will operate as long as at least one drive is operational. raid-0-requires-at-least-1-disk: RAID 0 requires at least 1 disk - raid-0-splits-data-evenly-across-2-or-more-disks-without-redunancy-or-fault-tolerance-creating-one-large-storage-space: >- + raid-0-splits-data-evenly-across-2-or-more-disks-without-redunancy-or-fault-tolerance-creating-one-large-storage-space: RAID 0 splits data evenly across 2 or more disks without redunancy or fault tolerance creating one large storage space. categories: @@ -5292,23 +5221,27 @@ tools: toml: TOML current-loop-4-20ma-converter: title: 4-20 mA converter - description: >- - Convert a 4-20 mA (or 0-20 mA) current into an engineering value and back, - with NAMUR NE 43 loop diagnostic. + description: Convert a 4-20 mA (or 0-20 mA) current into an engineering value + and back, with NAMUR NE 43 loop diagnostic. texts: signal-label: Current + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA voltage-0-10v-converter: title: 0-10 V converter - description: >- - Convert a 0-10 V, 2-10 V, 0-5 V, 1-5 V or ±10 V voltage into an + description: Convert a 0-10 V, 2-10 V, 0-5 V, 1-5 V or ±10 V voltage into an engineering value and back. texts: signal-label: Voltage + label-0-10-v: 0-10 V + label-2-10-v: 2-10 V + label-0-5-v: 0-5 V + label-1-5-v: 1-5 V + label-10-v: ±10 V analog-scaling-calculator: title: Analog scaling calculator - description: >- - Scale a raw PLC analog value (Siemens 0-27648, Schneider 0-10000, 12/15/16 - bits...) into an engineering value and back. + description: Scale a raw PLC analog value (Siemens 0-27648, Schneider 0-10000, + 12/15/16 bits...) into an engineering value and back. texts: signal-label: Raw value preset-siemens-unipolar: Siemens S7 unipolar (0 to 27648) @@ -5365,17 +5298,17 @@ tools: label-bottom-left: Bottom Left label-bottom-right: Bottom Right title-drag-and-drop-images-here-or-click-to-select-some-files: Drag and drop images here, or click to select some files - label-watermark-text: 'Watermark text:' + label-watermark-text: "Watermark text:" placeholder-watermark-text: Watermark text - label-font-size: 'Font size:' - label-opacity: 'Opacity:' - label-color: 'Color:' - label-rotation: 'Rotation (°):' - label-repeat-watermark: 'Repeat Watermark:' - label-position: 'Position:' + label-font-size: "Font size:" + label-opacity: "Opacity:" + label-color: "Color:" + label-rotation: "Rotation (°):" + label-repeat-watermark: "Repeat Watermark:" + label-position: "Position:" placeholder-watermark-position: Watermark Position title-optional-logo: Optional Logo - label-logo-width: 'Logo Width:' + label-logo-width: "Logo Width:" title-download-format: Download Format tag-apply-to-current: Apply to Current tag-download-current: Download Current @@ -5395,16 +5328,16 @@ tools: loading-0: Loading... PomodoroAbout: text: - source-wikipedia: 'Source: Wikipedia' + source-wikipedia: "Source: Wikipedia" once-the-long-break-is-finished-return-to-step-1: Once the long break is finished, return to Step 1. - keep-repeating-steps-1-3-but-after-your-4th-task-take-a-long-break-instead-of-a-short-break-20-30-minutes-is-common: >- + keep-repeating-steps-1-3-but-after-your-4th-task-take-a-long-break-instead-of-a-short-break-20-30-minutes-is-common: Keep repeating Steps 1-3, but after your 4th task, take a long break instead of a short break (20-30 minutes is common). when-the-timer-rings-take-a-short-break-5-10-minutes-is-common: When the timer rings, take a short break (5-10 minutes is common). work-on-the-task-during-that-time: Work on the task during that time. decide-on-a-task-and-set-the-timer-25-minutes-is-common: Decide on a task and set the timer (25 minutes is common). five-steps-of-the-pomodoro-technique: Five steps of the Pomodoro Technique - the-pomodoro-technique-is-a-time-management-method-developed-by-francesco-cirillo-in-the-1980s-it-uses-a-timer-to-break-work-into-intervals-typically-25-minutes-in-length-separated-by-short-breaks-each-interval-is-known-as-a-pomodoro-from-the-italian-word-for-tomato-after-the-tomato-shaped-kitchen-timer-cirillo-used-as-a-university-student: >- + the-pomodoro-technique-is-a-time-management-method-developed-by-francesco-cirillo-in-the-1980s-it-uses-a-timer-to-break-work-into-intervals-typically-25-minutes-in-length-separated-by-short-breaks-each-interval-is-known-as-a-pomodoro-from-the-italian-word-for-tomato-after-the-tomato-shaped-kitchen-timer-cirillo-used-as-a-university-student: The Pomodoro Technique is a time management method developed by Francesco Cirillo in the 1980s. It uses a timer to break work into intervals, typically 25 minutes in length, separated by short breaks. @@ -5448,10 +5381,9 @@ tools: settings: Settings phone-parser-and-formatter: title: Phone parser and formatter - description: >- - Parse, validate and format phone numbers. Get information about the phone - number, like the country code, type, etc. Forge link to send message in - WhatsApp and SMS. + description: Parse, validate and format phone numbers. Get information about the + phone number, like the country code, type, etc. Forge link to send message + in WhatsApp and SMS. texts: message-invalid-phone-number: Invalid phone number label-country: Country @@ -5463,11 +5395,11 @@ tools: label-national-format: National format label-e-164-format: E.164 format label-rfc3966-format: RFC3966 format - label-default-country-code: 'Default country code:' + label-default-country-code: "Default country code:" placeholder-enter-a-phone-number: Enter a phone number - label-phone-number: 'Phone number:' + label-phone-number: "Phone number:" placeholder-enter-a-message-to-send: Enter a message to send - label-message-to-send: 'Message to send:' + label-message-to-send: "Message to send:" title-whatsapp-send-link: WhatsApp Send link title-sms-send-link: SMS Send link tag-unknown: Unknown @@ -5490,11 +5422,11 @@ tools: description: Generate ICAL/ICS file from event infos texts: placeholder-generated-if-empty: Generated if empty - label-output-filename: 'Output filename:' - label-title: 'Title:' - label-dates-and-hours: 'Dates and hours:' + label-output-filename: "Output filename:" + label-title: "Title:" + label-dates-and-hours: "Dates and hours:" placeholder-put-a-description-here: Put a description here - label-url: 'Url:' + label-url: "Url:" placeholder-put-an-url-here: Put an url here tag-download-ics: Download ICS tag-delete: Delete @@ -5519,14 +5451,14 @@ tools: tag-bob-dylan: Bob Dylan tag-usa: USA tag-columbia: Columbia - tag-10-90: '10.90' - tag-1985: '1985' + tag-10-90: "10.90" + tag-1985: "1985" tag-hide-your-heart: Hide your heart tag-bonnie-tyler: Bonnie Tyler tag-uk: UK tag-cbs-records: CBS Records - tag-9-90: '9.90' - tag-1988: '1988' + tag-9-90: "9.90" + tag-1988: "1988" tag-format-xml-output: Format XML Output? tag-title: Title website: @@ -5555,8 +5487,7 @@ tools: article: Article qr-contact-info-generator: title: QR Contact Info generator - description: >- - Generate and download QR codes for Contact information (vCard), and + description: Generate and download QR codes for Contact information (vCard), and customize the background and foreground colors. texts: label-full-name: Full Name @@ -5570,8 +5501,8 @@ tools: placeholder-https-acme-com: https://acme.com label-company-address: Company Address placeholder-123-main-st-city: 123 Main St, City - label-foreground-color: 'Foreground color:' - label-background-color: 'Background color:' + label-foreground-color: "Foreground color:" + label-background-color: "Background color:" tag-download-qr-code: Download QR Code label-website: Website videoTVShow: @@ -5595,8 +5526,7 @@ tools: state-or-province-name: State or province name chmod-calculator: title: Chmod calculator - description: >- - Compute your chmod permissions and commands with this online chmod + description: Compute your chmod permissions and commands with this online chmod calculator. texts: message-invalid-octal-permission-string: Invalid octal permission string @@ -5607,16 +5537,16 @@ tools: label-copy-your-symbolic-permissions: Copy your symbolic permissions title-chmod-command: Chmod command title-umask: Umask - label-octal: 'Octal:' - label-symbolic: 'Symbolic:' + label-octal: "Octal:" + label-symbolic: "Symbolic:" tag-owner-u: Owner (u) tag-group-g: Group (g) tag-public-o: Public (o) tag-flags: Flags service: text: - invalid-octal-permissions-must-be-3-or-4-octal-digits-octalpermissions: 'Invalid octal permissions (must be 3 or 4 octal digits): {0}' - invalid-string-permissions-must-be-in-form-rwxrwxrwx-symbolicpermissions: 'Invalid string permissions (must be in form ''rwxrwxrwx''): {0}' + invalid-octal-permissions-must-be-3-or-4-octal-digits-octalpermissions: "Invalid octal permissions (must be 3 or 4 octal digits): {0}" + invalid-string-permissions-must-be-in-form-rwxrwxrwx-symbolicpermissions: "Invalid string permissions (must be in form 'rwxrwxrwx'): {0}" color-converter: title: Color converter description: Convert color between the different formats (hex, rgb, hsl and css name) @@ -5643,18 +5573,17 @@ tools: invalid-label-tolowercase-format: Invalid {0} format. password-strength-analyser: title: Password strength analyser - description: >- - Discover the strength of your password with this client-side-only password - strength analyser and crack time estimation tool. + description: Discover the strength of your password with this client-side-only + password strength analyser and crack time estimation tool. texts: - label-password-length: 'Password length:' - label-entropy: 'Entropy:' - label-character-set-size: 'Character set size:' - label-score: 'Score:' + label-password-length: "Password length:" + label-entropy: "Entropy:" + label-character-set-size: "Character set size:" + label-score: "Score:" placeholder-enter-a-password: Enter a password... tag-duration-to-crack-this-password-with-brute-force: Duration to crack this password with brute force - tag-note: 'Note:' - tag-the-computed-strength-is-based-on-the-time-it-would-take-to-crack-the-password-using-a-brute-force-approach-it-does-not-take-into-account-the-possibility-of-a-dictionary-attack: >- + tag-note: "Note:" + tag-the-computed-strength-is-based-on-the-time-it-would-take-to-crack-the-password-using-a-brute-force-approach-it-does-not-take-into-account-the-possibility-of-a-dictionary-attack: The computed strength is based on the time it would take to crack the password using a brute force approach, it does not take into account the possibility of a dictionary attack. @@ -5684,9 +5613,8 @@ tools: second: second multi-link-downloader: title: Multi link downloader - description: >- - The tool will asynchronously combine the contents of the provided links - into a single zip file for you to download. (Requires an internet + description: The tool will asynchronously combine the contents of the provided + links into a single zip file for you to download. (Requires an internet connection) texts: placeholder-add-links-separated-by-new-lines: Add links separated by new lines... @@ -5699,35 +5627,34 @@ tools: externalAccess: This tool downloads provided URLs in your browser only. mic-tester: title: Microphone Tester - description: >- - Replay and Visualize sound from Your microphone, with added one second of - delay + description: Replay and Visualize sound from Your microphone, with added one + second of delay start-button-text: Start replaying microphone stop-button-text: Stop replaying microphone service: text: - microphone-access-denied-the-error-is-also-in-the-console: 'Microphone access denied (the error is also in the console):' + microphone-access-denied-the-error-is-also-in-the-console: "Microphone access denied (the error is also in the console):" qr-code-generator: texts: - label-text: 'Text:' + label-text: "Text:" placeholder-your-link-or-text: Your link or text... - label-foreground-color: 'Foreground color:' - label-background-color: 'Background color:' - label-width: 'Width:' - label-margin: 'Margin:' - label-error-resistance: 'Error resistance:' + label-foreground-color: "Foreground color:" + label-background-color: "Background color:" + label-width: "Width:" + label-margin: "Margin:" + label-error-resistance: "Error resistance:" title-drag-and-drop-an-image-here-or-click-to-select-an-image: Drag and drop an image here, or click to select an image - label-size: 'Size:' - label-color: 'Color:' - label-type: 'Type:' - label-output-format: 'Output format:' - label-terminal-output: 'Terminal output:' + label-size: "Size:" + label-color: "Color:" + label-type: "Type:" + label-output-format: "Output format:" + label-terminal-output: "Terminal output:" tag-dots-options: Dots Options tag-corners-dots-options: Corners Dots Options tag-corners-square-options: Corners Square Options tag-small-terminal: Small Terminal title-image: Image - label-qr-code-embeddable-dataurl: 'QRCode Image Data-Url:' + label-qr-code-embeddable-dataurl: "QRCode Image Data-Url:" link-qr-code-open-embeddable-link: Open Embeddable Link label-qr-code-image-viewer: Embeddable QRCode basic-auth-generator: @@ -5740,16 +5667,15 @@ tools: yourpassword: Your password... copied: Header copied to the clipboard texts: - label-authorization-header: 'Authorization header:' + label-authorization-header: "Authorization header:" username: Username ies-lighting-guidelines: title: IES Lighting Guidelines - description: >- - Search in the Illuminating Engineering Society’s (IES) current illuminance - recommendations. + description: Search in the Illuminating Engineering Society’s (IES) current + illuminance recommendations. texts: placeholder-search-ies-recommendation-by-industry-or-application: Search IES recommendation by industry or application - tag-individual-applications-will-determine-exact-foot-candle-levels-please-refer-to-the: >- + tag-individual-applications-will-determine-exact-foot-candle-levels-please-refer-to-the: Individual applications will determine exact foot-candle levels. Please refer to the tag-ies-lighting-handbook: IES Lighting Handbook @@ -5836,11 +5762,11 @@ tools: song-details: Song details twitter: text: - the-name-of-the-twitter-account-of-the-creator-ex-sharevb: 'The name of the Twitter account of the creator (ex: {''@''}sharevb)...' + the-name-of-the-twitter-account-of-the-creator-ex-sharevb: "The name of the Twitter account of the creator (ex: {'@'}sharevb)..." creator-acc: Creator acc. - the-name-of-the-twitter-account-of-the-site-ex-ittoolsdottech: >- - The name of the Twitter account of the site (ex: - {'@'}ittoolsdottech)... + the-name-of-the-twitter-account-of-the-site-ex-ittoolsdottech: + "The name of the Twitter account of the site (ex: + {'@'}ittoolsdottech)..." site-account: Site account the-twitter-card-type: The Twitter card type... card-type: Card type @@ -5848,9 +5774,8 @@ tools: summary-with-large-image: Summary with large image summary: Summary twitter: Twitter - the-name-of-the-twitter-account-of-the-creator-ex-cthmsst: >- - The name of the Twitter account of the creator (ex{':'} - {'@'}cthmsst)... + the-name-of-the-twitter-account-of-the-creator-ex-cthmsst: The name of the + Twitter account of the creator (ex{':'} {'@'}cthmsst)... videoEpisode: text: which-series-this-episode-belongs-to: Which series this episode belongs to... @@ -5918,10 +5843,10 @@ tools: regex-tester: title: Regex Tester description: Test your regular expressions with sample text. - regex-input: 'Regex to test:' + regex-input: "Regex to test:" regex-input-placeholder: Put the regex to test link: See Regular Expression Cheatsheet - text-input: 'Text to match:' + text-input: "Text to match:" text-input-placeholder: Put the text to match matches: Matches text-index: Index in text @@ -5938,7 +5863,7 @@ tools: regex: Regex no-match: No match texts: - message-invalid-regex-0: 'Invalid regex: {0}' + message-invalid-regex-0: "Invalid regex: {0}" tag-global-search: Global search ( tag-g: g tag-: ) @@ -5952,7 +5877,7 @@ tools: tag-u: u tag-unicode-sets: Unicode Sets ( tag-v: v - tag-xa0: ' ' + tag-xa0: " " groups: Groups email-parser: title: Email Parser @@ -5990,9 +5915,8 @@ tools: label-subject: Subject user-agent-parser: title: User-agent parser - description: >- - Detect and parse Browser, Engine, OS, CPU, and Device type/model from an - user-agent string. + description: Detect and parse Browser, Engine, OS, CPU, and Device type/model + from an user-agent string. texts: label-name: Name label-version: Version @@ -6018,8 +5942,8 @@ tools: label-secret-raw-text: Secret - Raw Text label-secret-hex-array: Secret - Hex Array label-secret-base64: Secret - Base64 - label-secret-encoding: 'Secret Encoding/Type:' - key-or-secret-or-verification-error-e-tostring: 'Key or secret or verification error: {0}' + label-secret-encoding: "Secret Encoding/Type:" + key-or-secret-or-verification-error-e-tostring: "Key or secret or verification error: {0}" constants: text: token-introspection-response: Token introspection response @@ -6115,10 +6039,10 @@ tools: placeholder-your-username: Your username... label-password: Password placeholder-your-password: Your password... - label-hash-method: 'Hash method:' - label-salt-rounds: 'Salt rounds: ' + label-hash-method: "Hash method:" + label-salt-rounds: "Salt rounds: " placeholder-salt-rounds: Salt rounds... - label-htpasswd-content: 'htpasswd content:' + label-htpasswd-content: "htpasswd content:" service: text: unsupported-algorithm: Unsupported algorithm @@ -6126,9 +6050,8 @@ tools: md5-does-not-currently-support-non-ascii-characters: MD5 does not currently support non ASCII characters iban-validator-and-parser: title: IBAN validator and parser - description: >- - Validate and parse IBAN numbers. Check if an IBAN is valid and get the - country, BBAN, if it is a QR-IBAN and the IBAN friendly format. + description: Validate and parse IBAN numbers. Check if an IBAN is valid and get + the country, BBAN, if it is a QR-IBAN and the IBAN friendly format. texts: label-is-iban-valid: Is IBAN valid ? label-iban-errors: IBAN errors @@ -6159,27 +6082,27 @@ tools: description: Merge many iCal file to a single texts: title-drag-and-drop-ical-file-here-or-click-to-select-a-file: Drag and drop iCal file here, or click to select a file - label-title: 'Title:' + label-title: "Title:" placeholder-please-input-merge-calendar-title: Please input merge calendar title... - label-description: 'Description:' + label-description: "Description:" placeholder-please-input-merged-calendar-description: Please input merged calendar description... label-merged-ical: Merged ICAL tag-delete: Delete tag-merge-ical-files: Merge iCal files - file-to-merge-file-name: 'File to merge: {0}' + file-to-merge-file-name: "File to merge: {0}" download-merged-ical: Download merged iCal service: text: no-icals-parsed-successfully: No icals parsed successfully - failed-to-merge-e-n-nwith-input-input: 'Failed to merge: {0}\n\nWith input: {1}' + failed-to-merge-e-n-nwith-input-input: "Failed to merge: {0}\\n\\nWith input: {1}" text: regenerate-uids: Regenerate UIDs integer-base-converter: texts: label-input-number: Input number - placeholder-put-your-number-here-ex-42: 'Put your number here (ex: 42)' + placeholder-put-your-number-here-ex-42: "Put your number here (ex: 42)" label-input-base: Input base - placeholder-put-your-input-base-here-ex-10: 'Put your input base here (ex: 10)' + placeholder-put-your-input-base-here-ex-10: "Put your input base here (ex: 10)" label-binary-2: Binary (2) placeholder-binary-version-will-be-here: Binary version will be here... label-octal-8: Octal (8) @@ -6190,7 +6113,7 @@ tools: placeholder-hexadecimal-version-will-be-here: Hexadecimal version will be here... label-base64-64: Base64 (64) placeholder-base64-version-will-be-here: Base64 version will be here... - tag-custom: 'Custom:' + tag-custom: "Custom:" label-space-separation: Space separation label-binary-size: Binary size label-octal-size: Octal size @@ -6247,7 +6170,7 @@ tools: description: Format text using Unicode fonts texts: text-formatted-text-copied-to-the-clipboard: Formatted text copied to the clipboard - label-fonts: 'Fonts:' + label-fonts: "Fonts:" title-normal: Normal title-monospace: Monospace title-math-sans: Math Sans @@ -6309,9 +6232,8 @@ tools: title-bold: Bold hex-converter: title: Hex Encoder/Decoder - description: >- - Encode and decode Hex buffers to number (bits, endianess, sign or floating - point or chars) and structures + description: Encode and decode Hex buffers to number (bits, endianess, sign or + floating point or chars) and structures texts: message-struct-definition-is-not-a-valid-json: Struct definition is not a valid JSON label-decimal: Decimal @@ -6322,20 +6244,20 @@ tools: label-simple-encoder-decoder: Simple Encoder/Decoder label-c-c-typed-struct: C/C++ typed struct title-hex-options: Hex Options - label-decode-encode-as: 'Decode/Encode As:' - label-bits: 'Bits:' + label-decode-encode-as: "Decode/Encode As:" + label-bits: "Bits:" title-hex-data-decoder: Hex Data Decoder placeholder-put-your-hex-data-here: Put your Hex data here... label-hex-data-to-decode: Hex Data to decode - label-your-decoded-values: 'Your decoded values:' + label-your-decoded-values: "Your decoded values:" title-hex-data-encoder: Hex Data Encoder placeholder-put-your-numbers-array-here: Put your Numbers array here... label-numbers-array-to-encode: Numbers array to encode - label-your-encoded-numbers-array-as-hex: 'Your encoded numbers array as Hex:' + label-your-encoded-numbers-array-as-hex: "Your encoded numbers array as Hex:" title-hex-utf8-string-encoder: Hex UTF8 String Encoder placeholder-put-your-text-here: Put your text here... label-string-to-encode: String to encode - label-your-encoded-string-as-utf8-hex: 'Your encoded string as UTF8 Hex:' + label-your-encoded-string-as-utf8-hex: "Your encoded string as UTF8 Hex:" title-hex-encoding-output: Hex Encoding Output label-uppercase: Uppercase label-group-by: Group by @@ -6347,16 +6269,16 @@ tools: title-hex-struct-encoder: Hex Struct Encoder placeholder-put-your-struct-to-encode-here: Put your Struct to encode here... label-struct-json-to-encode: Struct json to encode - label-your-encoded-struct-as-hex: 'Your encoded struct as Hex:' + label-your-encoded-struct-as-hex: "Your encoded struct as Hex:" tag-floating-point: Floating Point tag-signed: Signed tag-big-endian: Big Endian tag-digits-0-no-grouping: digits (0 = no grouping) tag-group-of-digits-0-no-rows: group of digits (0 = no rows) tag-instructions: Instructions - tag-define-you-struct-definition-in-json-format-keys-struct-member-names-value-type: >- - Define you struct definition in JSON format: keys = struct member names - ; value = type + tag-define-you-struct-definition-in-json-format-keys-struct-member-names-value-type: + "Define you struct definition in JSON format: keys = struct member names + ; value = type" tag-can-prefix-integer-with-0x-or-0b-to-display-as-hex-and-binary: can prefix integer with 0x or 0b to display as hex and binary service: text: @@ -6364,17 +6286,17 @@ tools: unexpected-array-size-key-value-expected-coderoption-size-elements: Unexpected array size '{0}'='{1}' expected {2} elements unexpected-non-array-key-value: Unexpected non array '{0}'='{1}' bad-buffer-length-reading-key-obj-key-at-offset-offset: Bad buffer length reading {0}({1}) at offset {2} - cannot-decode-a-struct-with-array-key-key-must-be-expressed-as-string-with-fixed-length: >- + cannot-decode-a-struct-with-array-key-key-must-be-expressed-as-string-with-fixed-length: Cannot decode a struct with array (key={0}). Must be expressed as string with fixed length - unsupported-unsized-array-typename: 'Unsupported unsized array: {0}' + unsupported-unsized-array-typename: "Unsupported unsized array: {0}" floating-point-number-converter: texts: label-32-bit-single-precision: 32-Bit (Single precision) label-64-bit-double-precision: 64-Bit (Double precision) title-decimal-to-binary: Decimal to Binary label-decimal-number: Decimal Number - placeholder-put-your-decimal-number-here-ex-42-42: 'Put your decimal number here (ex: 42.42)' + placeholder-put-your-decimal-number-here-ex-42-42: "Put your decimal number here (ex: 42.42)" label-bit-count: Bit Count label-binary-number: Binary Number placeholder-binary-number: Binary Number @@ -6385,7 +6307,7 @@ tools: label-error-due-to-conversion: Error due to conversion placeholder-error-due-to-conversion: Error due to conversion title-binary-to-decimal: Binary to Decimal - placeholder-put-your-binary-number-here-ex-01000010001010011010111000010100: 'Put your binary number here (ex: 01000010001010011010111000010100)' + placeholder-put-your-binary-number-here-ex-01000010001010011010111000010100: "Put your binary number here (ex: 01000010001010011010111000010100)" label-decimal-precision: Decimal Precision placeholder-choose-the-decimal-precision-digits-after-the-decimal-point: Choose the decimal precision (digits after the decimal point). label-show-trailing-zeros: Show Trailing Zeros @@ -6398,18 +6320,18 @@ tools: unsupported-bit-count-only-32-and-64-are-allowed: Unsupported bit count. Only 32 and 64 are allowed. yaml-viewer: texts: - label-sort-keys: 'Sort keys :' - label-indent-size: 'Indent size :' - label-your-raw-yaml: 'Your raw YAML:' + label-sort-keys: "Sort keys :" + label-indent-size: "Indent size :" + label-your-raw-yaml: "Your raw YAML:" title-the-following-errors-occured: The following errors occured label-prettified-version-of-your-yaml: Prettified version of your YAML label-no-validation: No validation label-custom: Custom - label-json-schema: 'JSON schema:' + label-json-schema: "JSON schema:" placeholder-paste-your-json-schema-here: Paste your JSON Schema here... title-schema-validation-errors: Schema Validation Errors text: - see-error-messages: '#see error messages' + see-error-messages: "#see error messages" business-time-calculator: text: invalid-date: Invalid date @@ -6421,19 +6343,18 @@ tools: unicode-emojiinfo-value-unicode-copied-to-clipboard: Unicode '{0}' copied to clipboard name-emojiinfo-value-title-copied-to-clipboard: Name '{0}' copied to clipboard click-to-copy-emojiinfo-emoji: Click to copy {0} - click-to-copy-name-emojiinfo-title: 'Click to copy name: {0}' - click-to-copy-completecodepoints: 'Click to copy: {0}' - click-to-copy-emojiinfo-unicode: 'Click to copy: {0}' + click-to-copy-name-emojiinfo-title: "Click to copy name: {0}" + click-to-copy-completecodepoints: "Click to copy: {0}" + click-to-copy-emojiinfo-unicode: "Click to copy: {0}" emoji-picker: title: Emoji picker - description: >- - Copy and paste emojis easily and get the unicode and code points value of - each emoji. + description: Copy and paste emojis easily and get the unicode and code points + value of each emoji. texts: title-this-emoji-might-not-display-correctly-on-your-system: This emoji might not display correctly on your system tag-️: ⚠️ placeholder-search-emojis-e-g-smile-or-paste-an-emoji-e-g: Search emojis (e.g. 'smile') or paste an emoji (e.g. '😄') - label-max-results: 'Max results:' + label-max-results: "Max results:" tag-no-results-found: No results found tag-try-searching-for-something-else-like-smile-flag-or: Try searching for something else like "smile", "flag", or "😄" tag-search-results: Search Results @@ -6447,18 +6368,18 @@ tools: runs-entirely-in-your-browser-no-external-requests: Runs entirely in your browser. No external requests. json-viewer: texts: - label-sort-keys: 'Sort keys :' - label-unescape-unicode: 'Unescape Unicode :' - label-indent-size: 'Indent size :' + label-sort-keys: "Sort keys :" + label-unescape-unicode: "Unescape Unicode :" + label-indent-size: "Indent size :" label-your-raw-json: Your raw JSON placeholder-paste-your-raw-json-here: Paste your raw JSON here... label-prettified-version-of-your-json: Prettified version of your JSON label-no-validation: No validation label-custom: Custom - label-json-schema: 'JSON schema:' + label-json-schema: "JSON schema:" placeholder-paste-your-json-schema-here: Paste your JSON Schema here... title-schema-validation-errors: Schema Validation Errors - label-unescape-json-string: 'Unescape JSON string:' + label-unescape-json-string: "Unescape JSON string:" label-viewer: Viewer text: provided-json-is-not-valid: Provided JSON is not valid. @@ -6468,11 +6389,11 @@ tools: title: SPF DNS generator description: Generate SPF DNS TXT record text: - mechanisms: 'Mechanisms:' - policy: 'Policy:' + mechanisms: "Mechanisms:" + policy: "Policy:" texts: - label-mechanisms: 'Mechanisms:' - label-policy: 'Policy:' + label-mechanisms: "Mechanisms:" + label-policy: "Policy:" tag-const-alloweddomains-ref: const allowedDomains = ref tag-a: A tag-mx: MX @@ -6484,10 +6405,10 @@ tools: tag-pass-all: Pass (+all) tag-redirect: Redirect tag-exists: Exists - label-include-domains: 'Include Domains:' - label-allowed-ipv6s: 'Allowed IPv6s:' - label-allowed-ipv4s: 'Allowed IPv4s:' - label-allowed-domains: 'Allowed Domains:' + label-include-domains: "Include Domains:" + label-allowed-ipv6s: "Allowed IPv6s:" + label-allowed-ipv4s: "Allowed IPv4s:" + label-allowed-domains: "Allowed Domains:" title-spf-record-generator: SPF Record Generator certificate-key-parser: title: Certificate/Key parser @@ -6496,60 +6417,60 @@ tools: label-parsing-error: Parsing Error label-file: File label-content: Content - title-drag-and-drop-a-certificate-file-here-or-click-to-select-a-certificate-file: >- + title-drag-and-drop-a-certificate-file-here-or-click-to-select-a-certificate-file: Drag and drop a Certificate file here, or click to select a Certificate file - label-paste-your-public-key-private-key-signature-fingerprint-certificate: >- - Paste your Public Key / Private Key / Signature / Fingerprint / - Certificate: + label-paste-your-public-key-private-key-signature-fingerprint-certificate: + "Paste your Public Key / Private Key / Signature / Fingerprint / + Certificate:" placeholder-your-public-key-private-key-signature-fingerprint-certificate: Your Public Key / Private Key / Signature / Fingerprint / Certificate... - label-passphrase-for-encrypted-keys: 'Passphrase (for encrypted keys):' + label-passphrase-for-encrypted-keys: "Passphrase (for encrypted keys):" placeholder-passphrase-for-encrypted-keys: Passphrase (for encrypted keys)... placeholder-not-set: Not Set tag-download-x509-der-certificate: Download X509 DER certificate - label-key-type: 'Key Type:' - label-size: 'Size:' - label-comment: 'Comment:' - label-curve: 'Curve:' - label-fingerprint-sha256: 'Fingerprint (sha256):' - label-fingerprint-sha512: 'Fingerprint (sha512):' - label-key-pem: 'Key (PEM):' - label-type: 'Type:' - label-subjects: 'Subjects:' - label-valid-from: 'Valid From:' - label-valid-until: 'Valid Until:' - label-issuer: 'Issuer:' - label-subject-key: 'Subject Key:' - label-subject-key-type: 'Subject Key Type:' - label-subject-size: 'Subject Size:' - label-subject-comment: 'Subject Comment:' - label-subject-curve: 'Subject Curve:' - label-issuer-key: 'Issuer Key:' - label-serial: 'Serial:' - label-purposes: 'Purposes:' - label-extensions-parsed: 'Extensions (parsed):' - label-extensions-raw: 'Extensions (raw):' - label-certificate-pem: 'Certificate (pem):' - label-creation-time: 'Creation Time:' - label-expiration-time: 'Expiration Time:' - label-algorithm-info: 'Algorithm Info:' - label-fingerprint: 'Fingerprint:' - label-user-id-s: 'User ID(s):' - label-key-id-s: 'Key ID(s):' - label-subject: 'Subject:' - label-request-info: 'Request Info:' - label-signature: 'Signature:' - label-signature-oid: 'Signature Oid:' - label-signature-parameters: 'Signature parameters:' - label-signing-info: 'Signing info:' - label-extensions: 'Extensions:' - label-public-key: 'Public Key:' - label-public-key-fingerprint: 'Public Key Fingerprint:' - label-fingerprint-hex: 'Fingerprint (hex):' - label-fingerprint-base64: 'Fingerprint (base64):' - label-fingerprint-asn1: 'Fingerprint (asn1):' - label-fingerprint-ssh: 'Fingerprint (ssh):' - label-pem-header: 'PEM Header Type:' + label-key-type: "Key Type:" + label-size: "Size:" + label-comment: "Comment:" + label-curve: "Curve:" + label-fingerprint-sha256: "Fingerprint (sha256):" + label-fingerprint-sha512: "Fingerprint (sha512):" + label-key-pem: "Key (PEM):" + label-type: "Type:" + label-subjects: "Subjects:" + label-valid-from: "Valid From:" + label-valid-until: "Valid Until:" + label-issuer: "Issuer:" + label-subject-key: "Subject Key:" + label-subject-key-type: "Subject Key Type:" + label-subject-size: "Subject Size:" + label-subject-comment: "Subject Comment:" + label-subject-curve: "Subject Curve:" + label-issuer-key: "Issuer Key:" + label-serial: "Serial:" + label-purposes: "Purposes:" + label-extensions-parsed: "Extensions (parsed):" + label-extensions-raw: "Extensions (raw):" + label-certificate-pem: "Certificate (pem):" + label-creation-time: "Creation Time:" + label-expiration-time: "Expiration Time:" + label-algorithm-info: "Algorithm Info:" + label-fingerprint: "Fingerprint:" + label-user-id-s: "User ID(s):" + label-key-id-s: "Key ID(s):" + label-subject: "Subject:" + label-request-info: "Request Info:" + label-signature: "Signature:" + label-signature-oid: "Signature Oid:" + label-signature-parameters: "Signature parameters:" + label-signing-info: "Signing info:" + label-extensions: "Extensions:" + label-public-key: "Public Key:" + label-public-key-fingerprint: "Public Key Fingerprint:" + label-fingerprint-hex: "Fingerprint (hex):" + label-fingerprint-base64: "Fingerprint (base64):" + label-fingerprint-asn1: "Fingerprint (asn1):" + label-fingerprint-ssh: "Fingerprint (ssh):" + label-pem-header: "PEM Header Type:" autodetect: Autodetect certificate-x-509: Certificate (X.509) certificate-request-csr-pkcs-10: Certificate Request (CSR / PKCS#10) @@ -6568,12 +6489,12 @@ tools: pgp-private-key-block: PGP Private Key Block service: text: - type: 'Type:' + type: "Type:" unknown-format-or-invalid-passphrase: Unknown format or invalid passphrase - error: 'Error:' + error: "Error:" infos: text: - type: 'Type:' + type: "Type:" public-key: Public Key http-status-codes: title: HTTP status codes @@ -6585,51 +6506,51 @@ tools: text: the-client-needs-to-authenticate-to-gain-network-access: The client needs to authenticate to gain network access. network-authentication-required: Network Authentication Required - further-extensions-to-the-request-are-required-for-the-server-to-fulfill-it: >- + further-extensions-to-the-request-are-required-for-the-server-to-fulfill-it: Further extensions to the request are required for the server to fulfill it. not-extended: Not Extended the-server-detected-an-infinite-loop-while-processing-the-request: The server detected an infinite loop while processing the request. loop-detected: Loop Detected - the-server-is-unable-to-store-the-representation-needed-to-complete-the-request: >- + the-server-is-unable-to-store-the-representation-needed-to-complete-the-request: The server is unable to store the representation needed to complete the request. insufficient-storage: Insufficient Storage - transparent-content-negotiation-for-the-request-results-in-a-circular-reference: >- + transparent-content-negotiation-for-the-request-results-in-a-circular-reference: Transparent content negotiation for the request results in a circular reference. variant-also-negotiates: Variant Also Negotiates - the-server-does-not-support-the-http-protocol-version-used-in-the-request: >- + the-server-does-not-support-the-http-protocol-version-used-in-the-request: The server does not support the HTTP protocol version used in the request. http-version-not-supported: HTTP Version Not Supported - the-server-was-acting-as-a-gateway-or-proxy-and-did-not-receive-a-timely-response-from-the-upstream-server: >- + the-server-was-acting-as-a-gateway-or-proxy-and-did-not-receive-a-timely-response-from-the-upstream-server: The server was acting as a gateway or proxy and did not receive a timely response from the upstream server. gateway-timeout: Gateway Timeout - the-server-is-currently-unavailable-because-it-is-overloaded-or-down-for-maintenance: >- + the-server-is-currently-unavailable-because-it-is-overloaded-or-down-for-maintenance: The server is currently unavailable (because it is overloaded or down for maintenance). service-unavailable: Service Unavailable - the-server-was-acting-as-a-gateway-or-proxy-and-received-an-invalid-response-from-the-upstream-server: >- + the-server-was-acting-as-a-gateway-or-proxy-and-received-an-invalid-response-from-the-upstream-server: The server was acting as a gateway or proxy and received an invalid response from the upstream server. bad-gateway: Bad Gateway - the-server-either-does-not-recognize-the-request-method-or-it-lacks-the-ability-to-fulfill-the-request: >- + the-server-either-does-not-recognize-the-request-method-or-it-lacks-the-ability-to-fulfill-the-request: The server either does not recognize the request method, or it lacks the ability to fulfill the request. not-implemented: Not Implemented - a-generic-error-message-given-when-an-unexpected-condition-was-encountered-and-no-more-specific-message-is-suitable: >- + a-generic-error-message-given-when-an-unexpected-condition-was-encountered-and-no-more-specific-message-is-suitable: A generic error message, given when an unexpected condition was encountered and no more specific message is suitable. internal-server-error: Internal Server Error 5xx-server-error: 5xx server error - a-server-operator-has-received-a-legal-demand-to-deny-access-to-a-resource-or-to-a-set-of-resources-that-includes-the-requested-resource: >- + a-server-operator-has-received-a-legal-demand-to-deny-access-to-a-resource-or-to-a-set-of-resources-that-includes-the-requested-resource: A server operator has received a legal demand to deny access to a resource or to a set of resources that includes the requested resource. unavailable-for-legal-reasons: Unavailable For Legal Reasons - the-server-is-unwilling-to-process-the-request-because-either-an-individual-header-field-or-all-the-header-fields-collectively-are-too-large: >- + the-server-is-unwilling-to-process-the-request-because-either-an-individual-header-field-or-all-the-header-fields-collectively-are-too-large: The server is unwilling to process the request because either an individual header field, or all the header fields collectively, are too large. @@ -6640,7 +6561,7 @@ tools: precondition-required: Precondition Required the-client-should-switch-to-a-different-protocol-such-as-tls-1-0: The client should switch to a different protocol such as TLS/1.0. upgrade-required: Upgrade Required - indicates-that-the-server-is-unwilling-to-risk-processing-a-request-that-might-be-replayed: >- + indicates-that-the-server-is-unwilling-to-risk-processing-a-request-that-might-be-replayed: Indicates that the server is unwilling to risk processing a request that might be replayed. too-early: Too Early @@ -6648,25 +6569,25 @@ tools: failed-dependency: Failed Dependency the-resource-that-is-being-accessed-is-locked: The resource that is being accessed is locked. locked: Locked - the-request-was-well-formed-but-was-unable-to-be-followed-due-to-semantic-errors: >- + the-request-was-well-formed-but-was-unable-to-be-followed-due-to-semantic-errors: The request was well-formed but was unable to be followed due to semantic errors. unprocessable-entity: Unprocessable Entity - the-request-was-directed-at-a-server-that-is-not-able-to-produce-a-response: >- + the-request-was-directed-at-a-server-that-is-not-able-to-produce-a-response: The request was directed at a server that is not able to produce a response. misdirected-request: Misdirected Request the-server-refuses-the-attempt-to-brew-coffee-with-a-teapot: The server refuses the attempt to brew coffee with a teapot. i-m-a-teapot: I\'m a teapot - the-server-cannot-meet-the-requirements-of-the-expect-request-header-field: >- + the-server-cannot-meet-the-requirements-of-the-expect-request-header-field: The server cannot meet the requirements of the Expect request-header field. expectation-failed: Expectation Failed - the-client-has-asked-for-a-portion-of-the-file-but-the-server-cannot-supply-that-portion: >- + the-client-has-asked-for-a-portion-of-the-file-but-the-server-cannot-supply-that-portion: The client has asked for a portion of the file, but the server cannot supply that portion. range-not-satisfiable: Range Not Satisfiable - the-request-entity-has-a-media-type-which-the-server-or-resource-does-not-support: >- + the-request-entity-has-a-media-type-which-the-server-or-resource-does-not-support: The request entity has a media type which the server or resource does not support. unsupported-media-type: Unsupported Media Type @@ -6674,19 +6595,19 @@ tools: uri-too-long: URI Too Long the-request-is-larger-than-the-server-is-willing-or-able-to-process: The request is larger than the server is willing or able to process. payload-too-large: Payload Too Large - the-server-does-not-meet-one-of-the-preconditions-that-the-requester-put-on-the-request: >- + the-server-does-not-meet-one-of-the-preconditions-that-the-requester-put-on-the-request: The server does not meet one of the preconditions that the requester put on the request. precondition-failed: Precondition Failed - the-request-did-not-specify-the-length-of-its-content-which-is-required-by-the-requested-resource: >- + the-request-did-not-specify-the-length-of-its-content-which-is-required-by-the-requested-resource: The request did not specify the length of its content, which is required by the requested resource. length-required: Length Required - indicates-that-the-resource-requested-is-no-longer-available-and-will-not-be-available-again: >- + indicates-that-the-resource-requested-is-no-longer-available-and-will-not-be-available-again: Indicates that the resource requested is no longer available and will not be available again. gone: Gone - indicates-that-the-request-could-not-be-processed-because-of-conflict-in-the-request-such-as-an-edit-conflict: >- + indicates-that-the-request-could-not-be-processed-because-of-conflict-in-the-request-such-as-an-edit-conflict: Indicates that the request could not be processed because of conflict in the request, such as an edit conflict. conflict: Conflict @@ -6694,100 +6615,98 @@ tools: request-timeout: Request Timeout the-client-must-first-authenticate-itself-with-the-proxy: The client must first authenticate itself with the proxy. proxy-authentication-required: Proxy Authentication Required - the-requested-resource-is-capable-of-generating-only-content-not-acceptable-according-to-the-accept-headers-sent-in-the-request: >- + the-requested-resource-is-capable-of-generating-only-content-not-acceptable-according-to-the-accept-headers-sent-in-the-request: The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request. not-acceptable: Not Acceptable a-request-method-is-not-supported-for-the-requested-resource: A request method is not supported for the requested resource. method-not-allowed: Method Not Allowed - the-requested-resource-could-not-be-found-but-may-be-available-in-the-future: >- + the-requested-resource-could-not-be-found-but-may-be-available-in-the-future: The requested resource could not be found but may be available in the future. - the-request-was-valid-but-the-server-is-refusing-action-the-user-might-not-have-the-necessary-permissions-for-a-resource: >- + the-request-was-valid-but-the-server-is-refusing-action-the-user-might-not-have-the-necessary-permissions-for-a-resource: The request was valid, but the server is refusing action. The user might not have the necessary permissions for a resource. forbidden: Forbidden - reserved-for-future-use-the-original-intention-was-that-this-code-might-be-used-as-part-of-some-form-of-digital-cash-or-micropayment-scheme: >- + reserved-for-future-use-the-original-intention-was-that-this-code-might-be-used-as-part-of-some-form-of-digital-cash-or-micropayment-scheme: Reserved for future use. The original intention was that this code might be used as part of some form of digital cash or micropayment scheme. payment-required: Payment Required - similar-to-403-forbidden-but-specifically-for-use-when-authentication-is-required-and-has-failed-or-has-not-yet-been-provided: >- + similar-to-403-forbidden-but-specifically-for-use-when-authentication-is-required-and-has-failed-or-has-not-yet-been-provided: Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet been provided. unauthorized: Unauthorized - the-server-cannot-or-will-not-process-the-request-due-to-an-apparent-client-error: >- + the-server-cannot-or-will-not-process-the-request-due-to-an-apparent-client-error: The server cannot or will not process the request due to an apparent client error. bad-request: Bad Request 4xx-client-error: 4xx client error - the-request-and-all-future-requests-should-be-repeated-using-another-uri: >- + the-request-and-all-future-requests-should-be-repeated-using-another-uri: The request and all future requests should be repeated using another URI. permanent-redirect: Permanent Redirect - in-this-case-the-request-should-be-repeated-with-another-uri-however-future-requests-should-still-use-the-original-uri: >- + in-this-case-the-request-should-be-repeated-with-another-uri-however-future-requests-should-still-use-the-original-uri: In this case, the request should be repeated with another URI; however, future requests should still use the original URI. temporary-redirect: Temporary Redirect - no-longer-used-originally-meant-subsequent-requests-should-use-the-specified-proxy: >- + no-longer-used-originally-meant-subsequent-requests-should-use-the-specified-proxy: No longer used. Originally meant "Subsequent requests should use the specified proxy." switch-proxy: Switch Proxy - the-requested-resource-is-available-only-through-a-proxy-the-address-for-which-is-provided-in-the-response: >- + the-requested-resource-is-available-only-through-a-proxy-the-address-for-which-is-provided-in-the-response: The requested resource is available only through a proxy, the address for which is provided in the response. use-proxy: Use Proxy - indicates-that-the-resource-has-not-been-modified-since-the-version-specified-by-the-request-headers: >- + indicates-that-the-resource-has-not-been-modified-since-the-version-specified-by-the-request-headers: Indicates that the resource has not been modified since the version specified by the request headers. not-modified: Not Modified - the-response-to-the-request-can-be-found-under-another-uri-using-a-get-method: >- + the-response-to-the-request-can-be-found-under-another-uri-using-a-get-method: The response to the request can be found under another URI using a GET method. see-other: See Other - redirect-to-another-url-this-is-an-example-of-industry-practice-contradicting-the-standard: >- + redirect-to-another-url-this-is-an-example-of-industry-practice-contradicting-the-standard: Redirect to another URL. This is an example of industry practice contradicting the standard. found: Found this-and-all-future-requests-should-be-directed-to-the-given-uri: This and all future requests should be directed to the given URI. moved-permanently: Moved Permanently - indicates-multiple-options-for-the-resource-that-the-client-may-follow: >- - Indicates multiple options for the resource that the client may - follow. + indicates-multiple-options-for-the-resource-that-the-client-may-follow: Indicates multiple options for the resource that the client may follow. multiple-choices: Multiple Choices 3xx-redirection: 3xx redirection - the-server-has-fulfilled-a-request-for-the-resource-and-the-response-is-a-representation-of-the-result: >- + the-server-has-fulfilled-a-request-for-the-resource-and-the-response-is-a-representation-of-the-result: The server has fulfilled a request for the resource, and the response is a representation of the result. im-used: IM Used - the-members-of-a-dav-binding-have-already-been-enumerated-in-a-preceding-part-of-the-multistatus-response: >- + the-members-of-a-dav-binding-have-already-been-enumerated-in-a-preceding-part-of-the-multistatus-response: The members of a DAV binding have already been enumerated in a preceding part of the (multistatus) response. already-reported: Already Reported - the-message-body-that-follows-is-an-xml-message-and-can-contain-a-number-of-separate-response-codes: >- + the-message-body-that-follows-is-an-xml-message-and-can-contain-a-number-of-separate-response-codes: The message body that follows is an XML message and can contain a number of separate response codes. - the-server-is-delivering-only-part-of-the-resource-due-to-a-range-header-sent-by-the-client: >- + the-server-is-delivering-only-part-of-the-resource-due-to-a-range-header-sent-by-the-client: The server is delivering only part of the resource due to a range header sent by the client. partial-content: Partial Content - the-server-indicates-to-reinitialize-the-document-view-which-sent-this-request: >- + the-server-indicates-to-reinitialize-the-document-view-which-sent-this-request: The server indicates to reinitialize the document view which sent this request. reset-content: Reset Content - the-server-successfully-processed-the-request-and-is-not-returning-any-content: >- + the-server-successfully-processed-the-request-and-is-not-returning-any-content: The server successfully processed the request and is not returning any content. no-content: No Content - the-request-is-successful-but-the-content-of-the-original-request-has-been-modified-by-a-transforming-proxy: >- + the-request-is-successful-but-the-content-of-the-original-request-has-been-modified-by-a-transforming-proxy: The request is successful but the content of the original request has been modified by a transforming proxy. non-authoritative-information: Non-Authoritative Information - the-request-has-been-accepted-for-processing-but-the-processing-has-not-been-completed: >- + the-request-has-been-accepted-for-processing-but-the-processing-has-not-been-completed: The request has been accepted for processing, but the processing has not been completed. accepted: Accepted - the-request-has-been-fulfilled-resulting-in-the-creation-of-a-new-resource: >- + the-request-has-been-fulfilled-resulting-in-the-creation-of-a-new-resource: The request has been fulfilled, resulting in the creation of a new resource. created: Created @@ -6795,9 +6714,7 @@ tools: 2xx-success: 2xx success the-server-returns-some-response-headers-before-final-http-message: The server returns some response headers before final HTTP message. early-hints: Early Hints - the-server-is-processing-the-request-but-no-response-is-available-yet: >- - The server is processing the request, but no response is available - yet. + the-server-is-processing-the-request-but-no-response-is-available-yet: The server is processing the request, but no response is available yet. processing: Processing the-server-has-agreed-to-change-protocol: The server has agreed to change protocol. switching-protocols: Switching Protocols @@ -6808,45 +6725,44 @@ tools: title: Docker Compose to Quadlets description: Convert Docker compose file content to Podman Quadlets texts: - label-no: 'no' + label-no: no label-always: always label-on-failure: on-failure - label-paste-your-docker-compose-file-content-here: 'Paste your Docker Compose file content here:' + label-paste-your-docker-compose-file-content-here: "Paste your Docker Compose file content here:" title-options: Options - label-description: 'Description:' - label-after-targets: 'After Targets:' - label-wants-targets: 'Wants Targets:' - label-restart-policy: 'Restart Policy:' - label-wantedby: 'WantedBy:' - label-typical-storage-location: 'Typical storage location:' + label-description: "Description:" + label-after-targets: "After Targets:" + label-wants-targets: "Wants Targets:" + label-restart-policy: "Restart Policy:" + label-wantedby: "WantedBy:" + label-typical-storage-location: "Typical storage location:" docker-run-to-quadlets: title: Docker run to Quadlets description: Convert docker run commands to Podman Quadlets texts: - label-no: 'no' + label-no: no label-always: always label-on-failure: on-failure - label-your-docker-run-command-s: 'Your docker run command(s):' + label-your-docker-run-command-s: "Your docker run command(s):" placeholder-your-docker-run-command-s-to-convert: Your docker run command(s) to convert... title-options: Options - label-description: 'Description:' - label-after-targets: 'After Targets:' - label-wants-targets: 'Wants Targets:' - label-restart-policy: 'Restart Policy:' - label-wantedby: 'WantedBy:' + label-description: "Description:" + label-after-targets: "After Targets:" + label-wants-targets: "Wants Targets:" + label-restart-policy: "Restart Policy:" + label-wantedby: "WantedBy:" title-converted-quadlet-content: Converted Quadlet content - label-typical-storage-location: 'Typical storage location:' + label-typical-storage-location: "Typical storage location:" json-flatten-nestify: title: JSON Flattener/Unflattener - description: >- - Flatten or nestify/unflatten JSON content (ie, {'{'}a:{'{'}b:1{'}'}{'}'} - vs {'{'}"a.b":1{'}'} + description: Flatten or nestify/unflatten JSON content (ie, + {'{'}a:{'{'}b:1{'}'}{'}'} vs {'{'}"a.b":1{'}'} texts: message-provided-json-is-not-valid: Provided JSON is not valid label-mode: Mode - input-label-your-json-content: 'Your JSON content:' + input-label-your-json-content: "Your JSON content:" input-placeholder-paste-your-json-content-here: Paste your JSON content here - output-label-transformed-json: 'Transformed JSON:' + output-label-transformed-json: "Transformed JSON:" tag-flatten: Flatten tag-unflatten-nestify: Unflatten/Nestify json-merger: @@ -6854,18 +6770,18 @@ tools: description: Merge deeply two JSON content texts: message-provided-json-is-not-valid: Provided JSON is not valid - title-your-first-json-content: 'Your first JSON Content:' + title-your-first-json-content: "Your first JSON Content:" placeholder-put-your-json-content: Put your JSON content - title-your-second-json-content: 'Your second JSON Content:' - title-merged-json: 'Merged JSON:' + title-your-second-json-content: "Your second JSON Content:" + title-merged-json: "Merged JSON:" placeholder-your-merged-json-will-be-here: Your merged JSON will be here levenshtein-calculator: title: Levenshtein Calculator description: Compute Levenshtein distance and scores between to strings texts: - label-first-string: 'First string:' + label-first-string: "First string:" placeholder-enter-first-string: Enter first string - label-second-string: 'Second string:' + label-second-string: "Second string:" placeholder-enter-second-string: Enter second string title-results: Results label-distance: Distance @@ -6877,17 +6793,17 @@ tools: texts: placeholder-paste-your-swagger-openapi-json-manifest-here: Paste your Swagger/OpenAPI JSON manifest here title-swagger-ui: Swagger UI - tag-swagger-manifest: 'Swagger Manifest:' + tag-swagger-manifest: "Swagger Manifest:" tag-render-swagger-ui: Render Swagger UI yaml-flatten-nestify: title: YAML Flattener/Unflattener - description: 'Flatten or nestify/unflatten YAML content (ie, a.b: 1 vs a: b: 1)' + description: "Flatten or nestify/unflatten YAML content (ie, a.b: 1 vs a: b: 1)" texts: message-provided-yaml-is-not-valid: Provided YAML is not valid label-mode: Mode - input-label-your-yaml-content: 'Your YAML content:' + input-label-your-yaml-content: "Your YAML content:" input-placeholder-paste-your-yaml-content-here: Paste your YAML content here - output-label-transformed-yaml: 'Transformed YAML:' + output-label-transformed-yaml: "Transformed YAML:" tag-flatten: Flatten tag-unflatten-nestify: Unflatten/Nestify yaml-merger: @@ -6895,10 +6811,10 @@ tools: description: Merge deeply two YAML content texts: message-provided-yaml-is-not-valid: Provided YAML is not valid - title-your-first-yaml-content: 'Your first YAML Content:' + title-your-first-yaml-content: "Your first YAML Content:" placeholder-put-your-yaml-content: Put your YAML content - title-your-second-yaml-content: 'Your second YAML Content:' - title-merged-yaml: 'Merged YAML:' + title-your-second-yaml-content: "Your second YAML Content:" + title-merged-yaml: "Merged YAML:" placeholder-your-merged-yaml-will-be-here: Your merged YAML will be here json-to-data: texts: @@ -6914,22 +6830,20 @@ tools: copy: Copy numberPlaceholder: Generated random numbers... texts: - label-number-of-number-to-generate: 'Number of number to generate:' + label-number-of-number-to-generate: "Number of number to generate:" placeholder-put-characters-to-deny-from-number: Put denied characters here... - label-denied-characters: 'Denied characters:' + label-denied-characters: "Denied characters:" label-toupper: To uppercase digits tag-hexadecimal: Hexadecimal tag-decimal: Decimal copied: Numbers copied to clipboard! title: Random numbers generator - description: >- - Generate random numbers (decimal, hexadecimal). With denied characters, - you can generate other bases. + description: Generate random numbers (decimal, hexadecimal). With denied + characters, you can generate other bases. charset-detector: title: Text Charset Detector/Decoder - description: >- - Detect text possible charsets and allow to decode using each detected - encoding + description: Detect text possible charsets and allow to decode using each + detected encoding texts: title-input: Input label-file: File @@ -6948,7 +6862,7 @@ tools: description: Generate a Django secret key texts: text-django-secret-key-copied-to-clipboard: Django secret key copied to clipboard - label-django-secret-key: 'Django secret key:' + label-django-secret-key: "Django secret key:" tag-copy: Copy tag-regenerate: Regenerate service: @@ -6961,13 +6875,12 @@ tools: title-dnsbl-multi-checker: DNSBL Multi-Checker placeholder-enter-ip-or-domain: Enter IP or domain label-show-listed-only: Show Listed Only - label-resolved-ip: 'Resolved IP:' + label-resolved-ip: "Resolved IP:" tag-check-all: Check All tag-want-to-understand-why-an-ip-might-be-blacklisted-check-out: Want to understand why an IP might be blacklisted? Check out tag-this-dnsbl-explanation-and-removal-guide: this DNSBL explanation and removal guide tag-: . - externalAccess: >- - This tool checks and sends provided IP to DNSBL throught + externalAccess: This tool checks and sends provided IP to DNSBL throught https://cloudflare-dns.com/dns-query docker-compose-memo: title: Docker Compose cheatsheet @@ -6976,8 +6889,8 @@ tools: title: Docker inspect to Docker run description: Convert docker inspect command json result back to Docker run command texts: - label-paste-your-docker-inspect-json-output: 'Paste your Docker Inspect JSON output:' - title-the-following-errors-occured: 'The following errors occured:' + label-paste-your-docker-inspect-json-output: "Paste your Docker Inspect JSON output:" + title-the-following-errors-occured: "The following errors occured:" docker-swarm-memo: title: Docker SWARM cheatsheet description: Docker Swarm mode cheatsheet @@ -6988,9 +6901,9 @@ tools: title: Env Variables Format Converter description: Convert between common env vars format and yaml texts: - label-input-type: 'Input Type:' - label-input: 'Input:' - label-output-type: 'Output Type:' + label-input-type: "Input Type:" + label-input: "Input:" + label-output-type: "Output Type:" title-output: Output favicon-generator: title: Favicon Generator @@ -7070,9 +6983,9 @@ tools: label-normal: Normal label-bold: Bold label-lighter: Lighter - label-100: '100' - label-400: '400' - label-700: '700' + label-100: "100" + label-400: "400" + label-700: "700" label-italic: Italic label-oblique: Oblique label-sans-serif: Sans-serif @@ -7080,11 +6993,11 @@ tools: label-monospace: Monospace label-cursive: Cursive label-fantasy: Fantasy - label-weight: 'Weight:' + label-weight: "Weight:" placeholder-font-weight: Font Weight - label-style: 'Style:' + label-style: "Style:" placeholder-font-style: Font Style - label-fallback: 'Fallback:' + label-fallback: "Fallback:" placeholder-fallback-font: Fallback Font tag-defineprops: defineProps text: @@ -7108,9 +7021,8 @@ tools: label-decoded-text: Decoded text image-color-inverter: title: Image Color Inverter - description: >- - Invert the colors of an image to create a negative effect. Upload any - image and instantly get the color-inverted version. + description: Invert the colors of an image to create a negative effect. Upload + any image and instantly get the color-inverted version. texts: title-drag-and-drop-an-image-here-or-click-to-select: Drag and drop an image here, or click to select label-original-image: Original Image @@ -7132,18 +7044,18 @@ tools: service: texts: file-must-be-an-image: File must be an image - failed-to-process-image-err: 'Failed to process image:' + failed-to-process-image-err: "Failed to process image:" image-comparer: title: Image Comparer description: A tool to visualy compare images texts: title-image-compare-viewer: Image Compare Viewer - label-left-image-url: 'Left Image URL:' + label-left-image-url: "Left Image URL:" placeholder-enter-left-image-url: Enter left image URL - label-right-image-url: 'Right Image URL:' + label-right-image-url: "Right Image URL:" placeholder-enter-right-image-url: Enter right image URL - label-upload-left-image: 'Upload Left Image:' - label-upload-right-image: 'Upload Right Image:' + label-upload-left-image: "Upload Left Image:" + label-upload-right-image: "Upload Right Image:" tag-compare: Compare tag-upload-left: Upload Left tag-upload-right: Upload Right @@ -7154,45 +7066,45 @@ tools: title: Apache LogRotate Generator description: Generate Apache .log rotation configuration texts: - label-path: 'Path:' + label-path: "Path:" placeholder-enter-log-path-or-pattern: Enter log path or pattern... - label-rotate-count: 'Rotate Count:' - label-frequency: 'Frequency:' - label-min-size: 'Min Size:' + label-rotate-count: "Rotate Count:" + label-frequency: "Frequency:" + label-min-size: "Min Size:" placeholder-enter-min-size-and-unit: Enter min size and unit... - label-size: 'Size:' + label-size: "Size:" placeholder-enter-size-and-unit: Enter size and unit... - label-create-file: 'Create File:' - label-copy: 'Copy:' - label-copy-truncate: 'Copy Truncate:' - label-start-number: 'Start Number:' - label-extension: 'Extension:' + label-create-file: "Create File:" + label-copy: "Copy:" + label-copy-truncate: "Copy Truncate:" + label-start-number: "Start Number:" + label-extension: "Extension:" placeholder-enter-extension: Enter extension... - label-date-ext: 'Date Ext:' - label-date-format: 'Date Format:' + label-date-ext: "Date Ext:" + label-date-format: "Date Format:" placeholder-enter-date-format: Enter date format... - label-missing-ok: 'Missing OK:' - label-compress: 'Compress:' - label-delay-compress: 'Delay Compress:' - label-compress-ext: 'Compress Ext:' + label-missing-ok: "Missing OK:" + label-compress: "Compress:" + label-delay-compress: "Delay Compress:" + label-compress-ext: "Compress Ext:" placeholder-enter-compression-extension: Enter compression extension... - label-compress-cmd: 'Compress Cmd:' + label-compress-cmd: "Compress Cmd:" placeholder-enter-command: Enter command... - label-compress-options: 'Compress Options:' + label-compress-options: "Compress Options:" placeholder-enter-compression-options: Enter compression options... - label-uncompress-cmd: 'Uncompress Cmd:' - label-old-dir: 'Old Dir:' + label-uncompress-cmd: "Uncompress Cmd:" + label-old-dir: "Old Dir:" placeholder-enter-old-directory: Enter old directory... - label-mail: 'Mail:' + label-mail: "Mail:" placeholder-enter-email: Enter email... - label-mail-first: 'Mail First:' - label-mail-last: 'Mail Last:' - label-shred: 'Shred:' - label-shred-cycles: 'Shred Cycles:' - label-first-action: 'First Action:' - label-pre-rotate: 'Pre Rotate:' - label-post-rotate: 'Post Rotate:' - label-last-action: 'Last Action:' + label-mail-first: "Mail First:" + label-mail-last: "Mail Last:" + label-shred: "Shred:" + label-shred-cycles: "Shred Cycles:" + label-first-action: "First Action:" + label-pre-rotate: "Pre Rotate:" + label-post-rotate: "Post Rotate:" + label-last-action: "Last Action:" title-generated-config: Generated Config path: Glob pattern for log files to rotate. rotateCount: Number of rotated log files to keep. @@ -7225,18 +7137,18 @@ tools: lastAction: Script to run after rotation ends. mailto-generator: title: Mailto Generator - description: 'Generate a mailto: link href' + description: "Generate a mailto: link href" texts: title-mailto-link-generator: Mailto Link Generator - label-to: 'To:' + label-to: "To:" placeholder-recipient-example-com: recipient{'@'}example.com - label-cc: 'CC:' + label-cc: "CC:" placeholder-cc-example-com: cc{'@'}example.com - label-bcc: 'BCC:' + label-bcc: "BCC:" placeholder-bcc-example-com: bcc{'@'}example.com - label-subject: 'Subject:' + label-subject: "Subject:" placeholder-email-subject: Email subject - label-body: 'Body:' + label-body: "Body:" placeholder-email-body: Email body title-generated-link: Generated Link tag-open-mail-client: Open Mail Client @@ -7249,18 +7161,16 @@ tools: label-prettified-markdown: Prettified Markdown markdown-to-docx: title: Markdown to DOCX - description: >- - Convert Markdown documents to Word/DOCX document format with live preview - and custom styling support. + description: Convert Markdown documents to Word/DOCX document format with live + preview and custom styling support. texts: - label-your-markdown-to-convert: 'Your markdown to convert:' + label-your-markdown-to-convert: "Your markdown to convert:" placeholder-put-your-markdown-content-here: Put your markdown content here... tag-convert-to-docx-word: Convert to DOCX/Word middle-endian-converter: title: Middle-Endian Converter - description: >- - Convert bytes from Middle-Endian to Little/Big Endian for given bits - precision and type of Middle Endian + description: Convert bytes from Middle-Endian to Little/Big Endian for given + bits precision and type of Middle Endian texts: label-16-bit: 16-bit label-32-bit: 32-bit @@ -7274,11 +7184,11 @@ tools: label-middle-endian-type: Middle Endian Type placeholder-select-middle-endian-format: Select middle-endian format title-conversion-result: Conversion result - label-big-endian: 'Big Endian:' - label-little-endian: 'Little Endian:' - label-decimal: 'Decimal:' - label-octal: 'Octal:' - label-hexadecimal: 'Hexadecimal:' + label-big-endian: "Big Endian:" + label-little-endian: "Little Endian:" + label-decimal: "Decimal:" + label-octal: "Octal:" + label-hexadecimal: "Hexadecimal:" service: texts: invalid-hex-input-only-0-9-and-a-f-allowed: Invalid hex input. Only 0-9 and A-F allowed. @@ -7302,34 +7212,34 @@ tools: label-raid-z3: RAID-Z3 label-raid-50: RAID 50 title-mttdl-failure-probability-calculator: MTTDL & Failure Probability Calculator - label-raid-level: 'RAID Level:' + label-raid-level: "RAID Level:" placeholder-select-raid-level: Select RAID level - label-number-of-drives: 'Number of Drives:' - label-drive-mtbf-hours: 'Drive MTBF (hours):' - label-rebuild-time-hours: 'Rebuild Time (hours):' - label-bit-error-rate-ber-in-1ex: 'Bit Error Rate (BER in 1eX):' - label-drive-capacity-tb: 'Drive Capacity (TB):' - label-years-for-failure-probability: 'Years for Failure probability:' - label-mttdl-hours: 'MTTDL (hours):' - label-mttdl-years: 'MTTDL (years):' - label-failure-probability: 'Failure Probability:' + label-number-of-drives: "Number of Drives:" + label-drive-mtbf-hours: "Drive MTBF (hours):" + label-rebuild-time-hours: "Rebuild Time (hours):" + label-bit-error-rate-ber-in-1ex: "Bit Error Rate (BER in 1eX):" + label-drive-capacity-tb: "Drive Capacity (TB):" + label-years-for-failure-probability: "Years for Failure probability:" + label-mttdl-hours: "MTTDL (hours):" + label-mttdl-years: "MTTDL (years):" + label-failure-probability: "Failure Probability:" tag-key-terms-explained: 🧠 Key Terms Explained tag-raid-level: RAID Level - tag-raid-redundant-array-of-independent-disks-is-a-method-of-combining-multiple-physical-drives-into-one-logical-unit-to-improve-performance-redundancy-or-both: >- + tag-raid-redundant-array-of-independent-disks-is-a-method-of-combining-multiple-physical-drives-into-one-logical-unit-to-improve-performance-redundancy-or-both: RAID (Redundant Array of Independent Disks) is a method of combining multiple physical drives into one logical unit to improve performance, redundancy, or both. tag-description: Description tag-raid-0: RAID 0 - tag-striping-only-no-redundancy-fast-but-risky-if-one-drive-fails-all-data-is-lost: >- + tag-striping-only-no-redundancy-fast-but-risky-if-one-drive-fails-all-data-is-lost: Striping only. No redundancy. Fast but risky—if one drive fails, all data is lost. tag-raid-1: RAID 1 - tag-mirroring-data-is-duplicated-across-drives-high-redundancy-low-capacity-efficiency: >- + tag-mirroring-data-is-duplicated-across-drives-high-redundancy-low-capacity-efficiency: Mirroring. Data is duplicated across drives. High redundancy, low capacity efficiency. tag-raid-5: RAID 5 - tag-striping-with-parity-can-tolerate-one-drive-failure-balanced-speed-and-redundancy: >- + tag-striping-with-parity-can-tolerate-one-drive-failure-balanced-speed-and-redundancy: Striping with parity. Can tolerate one drive failure. Balanced speed and redundancy. tag-raid-6: RAID 6 @@ -7337,62 +7247,61 @@ tools: tag-raid-10: RAID 10 tag-mirrored-pairs-striped-together-high-performance-and-redundancy: Mirrored pairs striped together. High performance and redundancy. tag-raid-z1-z2-z3: RAID-Z1/Z2/Z3 - tag-zfs-based-raid-levels-with-single-double-or-triple-parity-designed-for-data-integrity: >- + tag-zfs-based-raid-levels-with-single-double-or-triple-parity-designed-for-data-integrity: ZFS-based RAID levels with single, double, or triple parity. Designed for data integrity. tag-raid-50: RAID 50 - tag-stripe-of-raid-5-arrays-combines-performance-of-raid-0-with-redundancy-of-raid-5: >- + tag-stripe-of-raid-5-arrays-combines-performance-of-raid-0-with-redundancy-of-raid-5: Stripe of RAID 5 arrays. Combines performance of RAID 0 with redundancy of RAID 5. tag-️-mtbf-mean-time-between-failures: ⏱️ MTBF (Mean Time Between Failures) - tag-the-average-time-in-hours-a-drive-is-expected-to-operate-before-failing-higher-mtbf-means-more-reliable-hardware: >- + tag-the-average-time-in-hours-a-drive-is-expected-to-operate-before-failing-higher-mtbf-means-more-reliable-hardware: The average time (in hours) a drive is expected to operate before failing. Higher MTBF means more reliable hardware. tag-rebuild-time: 🔁 Rebuild Time - tag-the-time-required-to-reconstruct-data-on-a-replacement-drive-after-a-failure-longer-rebuild-times-increase-the-risk-of-a-second-failure-during-recovery: >- + tag-the-time-required-to-reconstruct-data-on-a-replacement-drive-after-a-failure-longer-rebuild-times-increase-the-risk-of-a-second-failure-during-recovery: The time required to reconstruct data on a replacement drive after a failure. Longer rebuild times increase the risk of a second failure during recovery. tag-mttdl-mean-time-to-data-loss: 📉 MTTDL (Mean Time To Data Loss) - tag-a-statistical-estimate-of-how-long-a-raid-system-can-operate-before-data-loss-occurs-it-considers-drive-failures-rebuild-time-and-raid-redundancy-higher-mttdl-means-a-safer-system: >- + tag-a-statistical-estimate-of-how-long-a-raid-system-can-operate-before-data-loss-occurs-it-considers-drive-failures-rebuild-time-and-raid-redundancy-higher-mttdl-means-a-safer-system: A statistical estimate of how long a RAID system can operate before data loss occurs. It considers drive failures, rebuild time, and RAID redundancy. Higher MTTDL means a safer system. tag-bit-error-rate-ber: 🧮 Bit Error Rate (BER) - tag-the-probability-that-a-bit-read-from-a-disk-will-be-incorrect-due-to-hardware-limitations-even-tiny-bers-like-1-in-a-trillion-can-cause-issues-during-rebuilds-especially-with-large-drives: >- + tag-the-probability-that-a-bit-read-from-a-disk-will-be-incorrect-due-to-hardware-limitations-even-tiny-bers-like-1-in-a-trillion-can-cause-issues-during-rebuilds-especially-with-large-drives: The probability that a bit read from a disk will be incorrect due to hardware limitations. Even tiny BERs (like 1 in a trillion) can cause issues during rebuilds, especially with large drives. tag-unrecoverable-read-error-ure: 🧠 Unrecoverable Read Error (URE) - tag-occurs-when-a-drive-fails-to-read-a-sector-during-rebuild-ber-contributes-to-ure-risk-which-can-compromise-raid-recovery: >- + tag-occurs-when-a-drive-fails-to-read-a-sector-during-rebuild-ber-contributes-to-ure-risk-which-can-compromise-raid-recovery: Occurs when a drive fails to read a sector during rebuild. BER contributes to URE risk, which can compromise RAID recovery. tag-drive-capacity-tb: 📦 Drive Capacity (TB) - tag-total-storage-per-drive-larger-drives-take-longer-to-rebuild-and-are-more-susceptible-to-ber-related-errors: >- + tag-total-storage-per-drive-larger-drives-take-longer-to-rebuild-and-are-more-susceptible-to-ber-related-errors: Total storage per drive. Larger drives take longer to rebuild and are more susceptible to BER-related errors. tag-failure-probability: 📈 Failure Probability - tag-the-chance-that-the-raid-system-will-experience-data-loss-over-a-given-time-period-e-g-5-years-calculated-using-mttdl-and-exponential-failure-models: >- + tag-the-chance-that-the-raid-system-will-experience-data-loss-over-a-given-time-period-e-g-5-years-calculated-using-mttdl-and-exponential-failure-models: The chance that the RAID system will experience data loss over a given time period (e.g., 5 years). Calculated using MTTDL and exponential failure models. pack-files-for-ai: title: Pack files for AI - description: >- - Pack a directory of code source files to a single AI parsable form (like - repomix) + description: Pack a directory of code source files to a single AI parsable form + (like repomix) texts: title-repomix-like-ai-pack-generator: Repomix like AI Pack Generator - label-directory-structure: 'Directory Structure:' - label-include-files-regexp: 'Include Files (RegExp):' + label-directory-structure: "Directory Structure:" + label-include-files-regexp: "Include Files (RegExp):" placeholder-include-pattern-regexp: Include pattern (RegExp) - label-exclude-files-regexp: 'Exclude Files (RegExp):' + label-exclude-files-regexp: "Exclude Files (RegExp):" placeholder-exclude-pattern-regexp: Exclude pattern (RegExp) title-options: Options - label-output-format: 'Output Format:' + label-output-format: "Output Format:" label-xml: XML label-markdown: Markdown - label-output-preview: 'Output Preview:' + label-output-preview: "Output Preview:" tag-this-section-contains-a-summary-of-this-file: This section contains a summary of this file. tag-click-or-drag-code-source-files-or-folder-to-this-area-to-add-to-package: Click or drag code source files or folder to this area to add to package tag-show-uploaded-files: Show uploaded files @@ -7433,18 +7342,18 @@ tools: title: Sed Command generator description: Generate unix sed commands texts: - label-command-type: 'Command Type:' - title-search-pattern: 'Search Pattern:' + label-command-type: "Command Type:" + title-search-pattern: "Search Pattern:" placeholder-e-g-foo: e.g., foo - label-replacement: 'Replacement:' + label-replacement: "Replacement:" placeholder-e-g-bar: e.g., bar - label-delimiter: 'Delimiter:' - placeholder-e-g-or: 'e.g., / or #' - label-flags: 'Flags:' - label-options: 'Options:' + label-delimiter: "Delimiter:" + placeholder-e-g-or: "e.g., / or #" + label-flags: "Flags:" + label-options: "Options:" label-target-file: Target File placeholder-e-g-file-txt: e.g., file.txt - title-generated-sed-command: 'Generated Sed command:' + title-generated-sed-command: "Generated Sed command:" tag-for-more-information-about: For more information about tag-sed: sed tag-command-see: command, see @@ -7490,15 +7399,15 @@ tools: description: Prepare SQL statement from a given parametrized SQL query and parameters texts: title-sql-generator: SQL Generator - label-parameterized-sql-statement: 'Parameterized SQL statement:' - placeholder-e-g-select-from-users-where-name-name-and-age-and-type-type: >- + label-parameterized-sql-statement: "Parameterized SQL statement:" + placeholder-e-g-select-from-users-where-name-name-and-age-and-type-type: e.g. SELECT * FROM users WHERE name = :name AND age > ? AND type = {'@'}type title-parameters: Parameters placeholder-name-e-g-name-or-type: Name (e.g. name or type) placeholder-value-e-g-alice-or-42-or-1-3: Value (e.g. Alice or 42 or 1.3) - label-generated-sql: 'Generated SQL:' - tag-for-positional-parameters-leave-name-empty-for-named-parameters-enter-name-without-or-prefix: >- + label-generated-sql: "Generated SQL:" + tag-for-positional-parameters-leave-name-empty-for-named-parameters-enter-name-without-or-prefix: For positional parameters, leave Name empty. For named parameters, enter name without '?' or '{'@'}' prefix tag-generate-sql: Generate SQL @@ -7506,7 +7415,7 @@ tools: title: TOML Linter description: Lint and check TOML content texts: - title-your-toml-content: 'Your TOML Content:' + title-your-toml-content: "Your TOML Content:" title-linting-error: Linting Error title-valid-toml: Valid TOML tag-no-errors-found-your-toml-is-valid: No errors found. Your TOML is valid! @@ -7572,39 +7481,35 @@ tools: label-welsh: Welsh title-text-translator: Text Translator placeholder-enter-text-to-translate: Enter text to translate... - label-from: 'From:' + label-from: "From:" placeholder-from: From - label-to: 'To:' + label-to: "To:" placeholder-to: To placeholder-translation-will-appear-here: Translation will appear here... tag-translate: Translate - externalAccess: >- - This tool downloads translation models (Xenova/opus-mt-[source]-[target]) - from https://huggingface.co/ (or the configured models mirror). Processing - is done in your browser. + externalAccess: This tool downloads translation models + (Xenova/opus-mt-[source]-[target]) from https://huggingface.co/ (or the + configured models mirror). Processing is done in your browser. unicode-to-gsm7: title: Unicode to GSM-7 - description: >- - Encode unicode text to SMS GSM-7 encoding and display related SMS send - info + description: Encode unicode text to SMS GSM-7 encoding and display related SMS send info texts: input-label-your-text-to-encode-to-gsm-7: Your text to encode to GSM-7 input-placeholder-put-your-text-here: Put your text here... - output-label-gsm-7-encoded-version: 'GSM-7 encoded version:' + output-label-gsm-7-encoded-version: "GSM-7 encoded version:" title-sms-info: SMS Info - label-encoding: 'Encoding:' - label-message-size: 'Message size:' - label-total-size: 'Total size:' - label-segments-count: 'Segments count:' - label-non-gsm-7-characters: 'Non GSM-7 characters:' + label-encoding: "Encoding:" + label-message-size: "Message size:" + label-total-size: "Total size:" + label-segments-count: "Segments count:" + label-non-gsm-7-characters: "Non GSM-7 characters:" which-day: title: Which Day? - description: >- - Given a day and month, and years range, list all day of week a given date - is + description: Given a day and month, and years range, list all day of week a + given date is texts: - label-day-in-month: 'Day in month:' - label-month: 'Month:' + label-day-in-month: "Day in month:" + label-month: "Month:" label-start-year: Start Year label-end-year: End Year text: @@ -7623,64 +7528,63 @@ tools: texts: placeholder-put-your-input-configuration-here: Put your input configuration here... title-configuration: Configuration - label-server-name: 'Server Name:' + label-server-name: "Server Name:" placeholder-server-name-or-fqdn: Server Name or FQDN - label-server-port: 'Server Port:' - label-server-cidr: 'Server CIDR:' + label-server-port: "Server Port:" + label-server-cidr: "Server CIDR:" placeholder-server-cidr: Server CIDR - label-start-ip-number: 'Start IP number:' - label-number-of-clients: 'Number of clients:' + label-start-ip-number: "Start IP number:" + label-number-of-clients: "Number of clients:" label-use-pre-shared-keys: Use Pre Shared Keys - label-client-allowed-ips: 'Client Allowed IPs:' + label-client-allowed-ips: "Client Allowed IPs:" placeholder-client-allowed-ips: Client Allowed IPs - label-endpoint-optional: 'Endpoint (optional):' + label-endpoint-optional: "Endpoint (optional):" placeholder-endpoint: Endpoint label-dns: DNS - placeholder-dns-servers: 'DNS servers:' - label-post-up-rule: 'Post-Up rule:' + placeholder-dns-servers: "DNS servers:" + label-post-up-rule: "Post-Up rule:" placeholder-post-up-rule: Post-Up rule - label-post-down-rule: 'Post-Down rule:' + label-post-down-rule: "Post-Down rule:" placeholder-post-down-rule: Post-Down rule - title-generated-server-config-file: 'Generated Server Config file:' + title-generated-server-config-file: "Generated Server Config file:" tag-input-server-configuration: Input server configuration tag-generate-configurations: Generate Configurations xml-linter: title: XML Linter description: Lint XML content for syntax error texts: - title-your-xml-content: 'Your XML Content:' + title-your-xml-content: "Your XML Content:" title-linting-error: Linting Error title-valid-xml: Valid XML tag-no-errors-found-your-xml-is-valid: No errors found. Your XML is valid! zpool-calculator: title: ZPOOL RAID calculator - description: >- - Determine the usable capacity and other metrics of a ZFS storage pool and - compare layouts including stripe, mirror, RAIDZ1, RAIDZ2, RAIDZ3, and - dRAID. + description: Determine the usable capacity and other metrics of a ZFS storage + pool and compare layouts including stripe, mirror, RAIDZ1, RAIDZ2, RAIDZ3, + and dRAID. texts: - tag-: '?' - tag-total-disks-in-pool: 'Total Disks in Pool:' - tag-add-disk-tb: 'Add Disk (TB):' - tag-1: '1' - tag-10: '10' - tag-100: '100' - tag-12: '12' - tag-24: '24' - tag-60: '60' - tag-102: '102' + tag-: "?" + tag-total-disks-in-pool: "Total Disks in Pool:" + tag-add-disk-tb: "Add Disk (TB):" + tag-1: "1" + tag-10: "10" + tag-100: "100" + tag-12: "12" + tag-24: "24" + tag-60: "60" + tag-102: "102" tag-add-disk: Add Disk tag-tb-gb: TB/GB - tag-minimum-spares: 'Minimum Spares:' - tag-new-vdev-type: 'New vdev Type:' + tag-minimum-spares: "Minimum Spares:" + tag-new-vdev-type: "New vdev Type:" tag-mirror: Mirror tag-raidz1: RAIDZ1 tag-raidz2: RAIDZ2 tag-raidz3: RAIDZ3 tag-draid: dRAID - tag-openzfs-2-0-7-slop: 'OpenZFS 2.0.7 Slop:' - tag-new-vdev-width: 'New Vdev Width:' - tag-zfs-recordsize-value: 'ZFS recordsize value:' + tag-openzfs-2-0-7-slop: "OpenZFS 2.0.7 Slop:" + tag-new-vdev-width: "New Vdev Width:" + tag-zfs-recordsize-value: "ZFS recordsize value:" tag-4-kib: 4 KiB tag-8-kib: 8 KiB tag-16-kib: 16 KiB @@ -7695,42 +7599,42 @@ tools: tag-8-mib: 8 MiB tag-16-mib: 16 MiB tag-add-vdev-layout: Add vdev Layout - tag-zfs-ashift-value: 'ZFS ashift value:' - tag-9: '9' - tag-13: '13' - tag-14: '14' - tag-disk-swap-size: 'Disk Swap Size:' + tag-zfs-ashift-value: "ZFS ashift value:" + tag-9: "9" + tag-13: "13" + tag-14: "14" + tag-disk-swap-size: "Disk Swap Size:" tag-0-gib: 0 GiB tag-2-gib: 2 GiB tag-4-gib: 4 GiB tag-8-gib: 8 GiB - tag-table-data: 'Table Data:' + tag-table-data: "Table Data:" tag-usable-capacity-tib: Usable Capacity (TiB) - tag-decimal-places: 'Decimal Places:' - tag-0: '0' - tag-2: '2' - tag-3: '3' - tag-4: '4' - tag-5: '5' - tag-6: '6' - tag-7: '7' - tag-8: '8' + tag-decimal-places: "Decimal Places:" + tag-0: "0" + tag-2: "2" + tag-3: "3" + tag-4: "4" + tag-5: "5" + tag-6: "6" + tag-7: "7" + tag-8: "8" tag-bytes: bytes tag-usable-capacity-tb: Usable Capacity (TB) - tag-show-deflate-ratio: 'Show Deflate Ratio:' + tag-show-deflate-ratio: "Show Deflate Ratio:" tag-capacity-efficiency: Capacity Efficiency - tag-show-pool-afr: 'Show Pool AFR:' + tag-show-pool-afr: "Show Pool AFR:" tag-zfs-overhead: ZFS Overhead - tag-disk-afr: 'Disk AFR (%):' + tag-disk-afr: "Disk AFR (%):" tag-cap-w-reservation: Cap. w/ Reservation - tag-fast-draid-calculation: 'Fast dRAID Calculation:' - tag-reservation: 'Reservation (%):' - tag-show-only: 'Show Only:' + tag-fast-draid-calculation: "Fast dRAID Calculation:" + tag-reservation: "Reservation (%):" + tag-show-only: "Show Only:" tag-all: All tag-mirrors-stripes: Mirrors/Stripes tag-reset: Reset tag-see-zpool-openzfs-cheatsheet: See Zpool/OpenZFS Cheatsheet - tag-click-on-the-section-titles-to-expand-collapse-and-view-calculated-data-hovering-over-a-table-cell-loads-the-relevant-data-into-the-calculation-values-section-below-you-can-click-table-cells-to-freeze-or-unfreeze-those-values: >- + tag-click-on-the-section-titles-to-expand-collapse-and-view-calculated-data-hovering-over-a-table-cell-loads-the-relevant-data-into-the-calculation-values-section-below-you-can-click-table-cells-to-freeze-or-unfreeze-those-values: Click on the section titles to expand/collapse and view calculated data. Hovering over a table cell loads the relevant data into the Calculation Values section below. You can click table cells to freeze or unfreeze @@ -7749,23 +7653,23 @@ tools: placeholder-enter-your-password: Enter your password title-warning: Warning title-suggestions: Suggestions - tag-estimated-fast-offline-crack-time-1e10-s: 'Estimated fast offline crack time (1e10/s):' - tag-estimated-slow-offline-crack-time-1e4-s: 'Estimated slow offline crack time (1e4/s):' - tag-estimated-online-throttling-crack-time-10-s: 'Estimated online throttling crack time (10/s):' - tag-estimated-online-no-throttling-crack-time-10-s: 'Estimated online no throttling crack time (10/s):' + tag-estimated-fast-offline-crack-time-1e10-s: "Estimated fast offline crack time (1e10/s):" + tag-estimated-slow-offline-crack-time-1e4-s: "Estimated slow offline crack time (1e4/s):" + tag-estimated-online-throttling-crack-time-10-s: "Estimated online throttling crack time (10/s):" + tag-estimated-online-no-throttling-crack-time-10-s: "Estimated online no throttling crack time (10/s):" credit-card-checker: title: Credit Card Checker description: Check a Credit Card number for validity texts: - label-credit-card-number: 'Credit Card Number:' + label-credit-card-number: "Credit Card Number:" placeholder-e-g-4111-1111-1111-1111: e.g. 4111 1111 1111 1111 title-credit-card-number-info: Credit Card Number Info - label-formatted: 'Formatted:' - label-pan-truncated: 'PAN Truncated:' - label-scheme: 'Scheme:' - label-major-industry-identifier: 'Major Industry Identifier:' - label-issuer-identifier-number: 'Issuer Identifier Number:' - label-cvv-length: 'CVV Length:' + label-formatted: "Formatted:" + label-pan-truncated: "PAN Truncated:" + label-scheme: "Scheme:" + label-major-industry-identifier: "Major Industry Identifier:" + label-issuer-identifier-number: "Issuer Identifier Number:" + label-cvv-length: "CVV Length:" tag-invlid-credit-card-number: Invlid Credit Card Number database-connection-string-builder: title: Database Connection String Builder @@ -7786,9 +7690,9 @@ tools: label-x-509-certificate: X.509 Certificate title-database-connection-string-generator: Database Connection String Generator placeholder-select-a-database: Select a database - label-database-type: 'Database type:' + label-database-type: "Database type:" placeholder-select-format: Select format - label-connection-string-format: 'Connection String Format:' + label-connection-string-format: "Connection String Format:" label-authentication-type: Authentication Type placeholder-select-authentication: Select authentication label-host: Host @@ -7812,11 +7716,11 @@ tools: description: Convert dBm to mW and conversely texts: title-dbm-to-mw: dBm to mW - label-dbm-value: 'dBm value:' - label-corresponding-mw-value: 'Corresponding mW value:' + label-dbm-value: "dBm value:" + label-corresponding-mw-value: "Corresponding mW value:" title-mw-to-dbm: mW to dBm - label-mw-value: 'mW value:' - label-corresponding-dbm-value: 'Corresponding dBm value:' + label-mw-value: "mW value:" + label-corresponding-dbm-value: "Corresponding dBm value:" service: texts: power-in-milliwatts-must-be-greater-than-0: Power in milliwatts must be greater than 0 @@ -7830,36 +7734,35 @@ tools: label-japanese: Japanese label-swedish: Swedish text-diceward-passwords-copied-to-clipboard: Diceward Passwords copied to clipboard! - label-number-of-diceware-passwords-to-generate: 'Number of Diceware passwords to generate:' - label-languages: 'Languages:' - label-generated-passwords: 'Generated passwords:' + label-number-of-diceware-passwords-to-generate: "Number of Diceware passwords to generate:" + label-languages: "Languages:" + label-generated-passwords: "Generated passwords:" placeholder-diceware-passwords: Diceware passwords... tag-copy: Copy tag-refresh: Refresh label-russian: Russian gtin-validator: title: GTIN Validator - description: >- - Validate and display information about GTIN (Global Trade Identifier - Number formerly EAN Number), UPC and other product codes formats + description: Validate and display information about GTIN (Global Trade + Identifier Number formerly EAN Number), UPC and other product codes + formats texts: placeholder-enter-gtin-e-g-4006381333931: Enter GTIN (e.g., 4006381333931) - label-gtin: 'GTIN:' + label-gtin: "GTIN:" title-validation: Validation - label-format: 'Format:' - label-minified: 'Minified:' - label-minified-format: 'Minified Format:' - label-check-digit: 'Check Digit:' + label-format: "Format:" + label-minified: "Minified:" + label-minified-format: "Minified Format:" + label-check-digit: "Check Digit:" tag-gtin-is-valid: GTIN is valid iana-whois-checker: title: Whois Checker description: Check whois for a domain using IANA Website texts: - label-domain-to-check: 'Domain to check:' + label-domain-to-check: "Domain to check:" placeholder-enter-a-domain-e-g-example-com: Enter a domain (e.g. example.com) tag-lookup-whois: Lookup WHOIS - externalAccess: >- - This tool launch a new tab with domain to check at + externalAccess: This tool launch a new tab with domain to check at https://www.iana.org/whois keyboard-layout-converter: title: Keyboard Layout Converter @@ -7888,7 +7791,7 @@ tools: placeholder-source-layout: Source layout placeholder-target-layout: Target layout placeholder-type-here: Type here… - label-input-value: 'Input value:' + label-input-value: "Input value:" title-converted-to-target-keyboard-layout: Converted to target keyboard layout placeholder-converted-output: Converted output niceware-bytes-to-passphrase: @@ -7897,34 +7800,34 @@ tools: texts: title-hex-array-to-niceware-passphrase: Hex Array to Niceware passphrase placeholder-put-your-hex-array-here: Put your hex array here... - label-hex-array-to-encode: 'Hex array to encode:' - label-converted-niceware-passphrase: 'Converted Niceware passphrase:' + label-hex-array-to-encode: "Hex array to encode:" + label-converted-niceware-passphrase: "Converted Niceware passphrase:" title-niceware-passphrase-to-hex-array: Niceware passphrase to hex array label-uppercase: Uppercase label-group-by: Group by label-split-as-row-by: Split as row by placeholder-put-your-niceware-passphrase-here: Put your niceware passphrase here... - label-niceware-passphrase-to-decode: 'Niceware passphrase to decode:' - label-converted-to-hex-array: 'Converted to Hex array:' + label-niceware-passphrase-to-decode: "Niceware passphrase to decode:" + label-converted-to-hex-array: "Converted to Hex array:" tag-digit-0-no-grouping: (Digit 0 = No grouping) tag-digit-0-no-row: (Digit 0 = No row) toon-to-json: texts: message-provided-json-is-not-valid: Provided TOON is not valid - output-label-json-version: 'JSON version of your TOON content:' + output-label-json-version: "JSON version of your TOON content:" input-placeholder-paste-your-raw-toon-here: Paste your raw TOON content here... - input-label-your-raw-toon: 'Your raw TOON content:' + input-label-your-raw-toon: "Your raw TOON content:" title: TOON to JSON description: Convert TOON representation to JSON object for LLM usage json-to-toon: texts: message-provided-json-is-not-valid: Provided JSON is not valid. input-placeholder-paste-your-raw-json-here: Paste your raw JSON here... - input-label-your-raw-json: 'Your raw JSON:' - output-label-toon-version-of-your-json: 'TOON version of your JSON:' + input-label-your-raw-json: "Your raw JSON:" + output-label-toon-version-of-your-json: "TOON version of your JSON:" title: JSON to TOON description: Convert JSON object to TOON representation for LLM/GPT usage - external-link-goto: 'To open this tool, follow this link: ' + external-link-goto: "To open this tool, follow this link: " argon2-hash: title: Argon2 Hasher description: Compute Argon2 hashes with parameters @@ -7935,28 +7838,27 @@ tools: label-hex: Hex label-encoded: Encoded label-binary: Binary - label-algorithm: 'Algorithm:' - label-password: 'Password:' + label-algorithm: "Algorithm:" + label-password: "Password:" placeholder-enter-password: Enter password - label-salt-hex: 'Salt (hex):' + label-salt-hex: "Salt (hex):" placeholder-optional-hex-salt: Optional hex salt - label-iterations: 'Iterations:' - label-memory-kib: 'Memory (KiB):' - label-parallelism: 'Parallelism:' - label-hash-length: 'Hash length:' - label-output-type: 'Output type:' + label-iterations: "Iterations:" + label-memory-kib: "Memory (KiB):" + label-parallelism: "Parallelism:" + label-hash-length: "Hash length:" + label-output-type: "Output type:" title-argon2-hash: Argon2 Hash tag-generate: Generate binary-calculator: title: Binary Calculator - description: >- - Calculate bitwise/binary operations (AND, OR, XOR, NOT, shifts) between - two numbers + description: Calculate bitwise/binary operations (AND, OR, XOR, NOT, shifts) + between two numbers texts: label-decimal: Decimal - label-hexadecimal: 'Hexadecimal:' - label-octal: 'Octal:' - label-binary: 'Binary:' + label-hexadecimal: "Hexadecimal:" + label-octal: "Octal:" + label-binary: "Binary:" label-a-and-b: A AND B label-a-or-b: A OR B label-a-xor-b: A XOR B @@ -7968,11 +7870,11 @@ tools: placeholder-enter-a: Enter A label-b: B= placeholder-enter-b: Enter B - label-operation: 'Operation:' + label-operation: "Operation:" placeholder-select-operation: Select Operation title-result: Result - label-decimal-signed: 'Decimal (Signed):' - label-decimal-unigned: 'Decimal (Unigned):' + label-decimal-signed: "Decimal (Signed):" + label-decimal-unigned: "Decimal (Unigned):" title-bitmask: Bitmask chmod-memo: title: chmod Command Cheatsheet @@ -7981,8 +7883,8 @@ tools: title: CSS Gradient Generator description: Generate CSS Gradient css code for a given set of steps and colors texts: - label-gradient-type: 'Gradient Type:' - label-angle-degrees: 'Angle (degrees):' + label-gradient-type: "Gradient Type:" + label-angle-degrees: "Angle (degrees):" title-color-stops: Color Stops title-preview: Preview title-generated-css: Generated CSS @@ -8000,28 +7902,27 @@ tools: label-percent: Percent (%) label-viewport-width-vw: Viewport Width (vw) label-viewport-height-vh: Viewport Height (vh) - label-value-to-convert: 'Value to convert:' - label-from-unit: 'From Unit:' - label-to-unit: 'To Unit:' + label-value-to-convert: "Value to convert:" + label-from-unit: "From Unit:" + label-to-unit: "To Unit:" label-base-font-size-px: Base Font Size (px) label-viewport-width-px: Viewport Width (px) label-viewport-height-px: Viewport Height (px) title-conversion: Conversion - label-converted-value: 'Converted value:' + label-converted-value: "Converted value:" docker-compose-to-env-file: title: Docker Compose to .env file description: Extract .env file from an existing Docker Compose file texts: - label-docker-compose-file: 'Docker Compose file:' + label-docker-compose-file: "Docker Compose file:" placeholder-paste-your-docker-compose-yaml-here: Paste your docker-compose YAML here... title-extract-env: Extract .env - title-updated-docker-compose: 'Updated Docker Compose:' + title-updated-docker-compose: "Updated Docker Compose:" emv-tlv-decoder: title: EMV TLV decoder - description: >- - Decodes the EMV TLV (tag-length-value) data and its individual tags having - extended meaning (such as TVR (Tag 95), Terminal Capabilities (Tag 9F33), - etc.) + description: Decodes the EMV TLV (tag-length-value) data and its individual tags + having extended meaning (such as TVR (Tag 95), Terminal Capabilities (Tag + 9F33), etc.) texts: tag-: — tag-tag: Tag @@ -8030,22 +7931,22 @@ tools: tag-description: Description tag-bit-level-interpretation: Bit-Level Interpretation label-tlv-hex-input: TLV Hex Input - placeholder-paste-emv-tlv-hex-string-e-g-6f1a8407a0000000031010a50f500b5649534120435245444954: >- + placeholder-paste-emv-tlv-hex-string-e-g-6f1a8407a0000000031010a50f500b5649534120435245444954: Paste EMV TLV hex string (e.g. 6F1A8407A0000000031010A50F500B5649534120435245444954) - label-kernel-type: 'Kernel Type:' + label-kernel-type: "Kernel Type:" title-decoded-emv-tags: Decoded EMV Tags tag-parse-tlv: Parse TLV eth-transaction-decoder: title: ETH Transaction Decoder description: Ethereum transaction decoder with Smart Contract ABI texts: - label-smart-contract-abi: 'Smart Contract ABI:' + label-smart-contract-abi: "Smart Contract ABI:" placeholder-paste-abi-json-here: Paste ABI JSON here - label-raw-transaction-0x-or-json-transaction: 'Raw Transaction (0x...) or JSON Transaction:' - placeholder-quot-to-quot-quot-0x-quot-quot-data-quot-quot-0x-quot-or-raw-0x: >- - {'{'}"to":"0x...","data":"0x..."{'}'} - or raw 0x.... + label-raw-transaction-0x-or-json-transaction: "Raw Transaction (0x...) or JSON Transaction:" + placeholder-quot-to-quot-quot-0x-quot-quot-data-quot-quot-0x-quot-or-raw-0x: + "{'{'}"to":"0x...","data":"0x...&quo\ + t;{'}'} or raw 0x...." title-decoded-transaction: Decoded Transaction label-from: From label-to: To @@ -8068,9 +7969,9 @@ tools: title-drag-and-drop-a-txt-json-or-xml-file-here-or-click-to-select-a-file: Drag and drop a TXT, JSON or XML file here, or click to select a file tag-split-by-lines: Split by Lines tag-split-by-nodes: Split by Nodes - tag-max-chunk-size-kb: 'Max Chunk size (KB):' - tag-fixed-count: 'Fixed Count:' - tag-chunk-count: 'Chunk Count:' + tag-max-chunk-size-kb: "Max Chunk size (KB):" + tag-fixed-count: "Fixed Count:" + tag-chunk-count: "Chunk Count:" tag-preview-chunks: Preview chunks? tag-process-chunks: Process chunks tag-download-all: Download all @@ -8086,27 +7987,26 @@ tools: title-gitignore: .gitignore tag-generate: Generate snapshot-used: Using the bundled template snapshot from {0}. - externalAccess: >- - This tool downloads .gitignore templates from + externalAccess: This tool downloads .gitignore templates from https://github.com/github/gitignore using the GitHub API, and falls back to a bundled snapshot when GitHub is unreachable. i-and-l-checker: title: I and L Checker description: Check a password or text with highlighting of 1, l, I, 0, O texts: - label-text-to-check: 'Text to check:' + label-text-to-check: "Text to check:" placeholder-paste-your-text-here: Paste your text here... title-legend: Legend tag-i: I - tag-uppercase-letter-i: '- Uppercase letter i' + tag-uppercase-letter-i: "- Uppercase letter i" tag-l: l - tag-lowercase-letter-l: '- Lowercase letter L' - tag-1: '1' - tag-number-1: '- Number 1' - tag-0: '0' - tag-number-0: '- Number 0' + tag-lowercase-letter-l: "- Lowercase letter L" + tag-1: "1" + tag-number-1: "- Number 1" + tag-0: "0" + tag-number-0: "- Number 0" tag-o: O - tag-uppercase-letter-o: '- Uppercase letter O' + tag-uppercase-letter-o: "- Uppercase letter O" ipv4-subnets-list: title: IPv4 Subnets Lister description: List all possible subnets of a given CIDR @@ -8123,34 +8023,34 @@ tools: description: Convert JSON to MessagePack texts: message-json-is-invalid: JSON is invalid - label-output-filename: 'Output filename:' + label-output-filename: "Output filename:" placeholder-enter-output-filename: Enter output filename - label-json-to-convert: 'JSON to convert:' + label-json-to-convert: "JSON to convert:" placeholder-enter-json-to-convert: Enter JSON to convert... - title-msgpack-binary: 'MsgPack Binary:' + title-msgpack-binary: "MsgPack Binary:" tag-convert: Convert tag-download-msgpack-file: Download MsgPack file markdown-lorem-ipsum: title: Markdown Lorem Ipsum description: Generate Lorem Ipsum in markdown texts: - label-atx: 'ATX (#, ##, ###)' + label-atx: "ATX (#, ##, ###)" label-setext: Setext (====, ----) label-unordered: Unordered (-, *, +) label-ordered-1-2-3: Ordered (1., 2., 3.) - label-language: 'Language:' - label-blocks: 'Blocks:' - label-sentences-per-paragraph: 'Sentences per paragraph:' + label-language: "Language:" + label-blocks: "Blocks:" + label-sentences-per-paragraph: "Sentences per paragraph:" title-styles: Styles - label-block-types: 'Block types:' + label-block-types: "Block types:" label-inline-styles: Inline styles - label-header-style: 'Header style:' - label-list-style: 'List style:' + label-header-style: "Header style:" + label-list-style: "List style:" title-block-frequencies: Block frequencies - label-headers: 'Headers:' - label-lists: 'Lists:' - label-code: 'Code:' - label-quotes: 'Quotes:' + label-headers: "Headers:" + label-lists: "Lists:" + label-code: "Code:" + label-quotes: "Quotes:" title-generated-markdown: Generated Markdown tag-headers: Headers tag-lists: Lists @@ -8168,7 +8068,7 @@ tools: texts: title-input-message-pack-file-or-content: Input Message Pack file or content label-file: File - label-hex-content: 'Hex Content:' + label-hex-content: "Hex Content:" title-drag-and-drop-msgpack-file-here-or-click-to-select-a-file: Drag and drop MsgPack file here, or click to select a file title-json-content: JSON Content pdf-compressor: @@ -8183,9 +8083,9 @@ tools: label-pdf-1-5: PDF 1.5 label-pdf-1-6: PDF 1.6 label-pdf-1-7: PDF 1.7 - label-compression-quality: 'Compression quality:' + label-compression-quality: "Compression quality:" placeholder-select-compression-quality: Select compression quality - label-compatibility-level: 'Compatibility level:' + label-compatibility-level: "Compatibility level:" placeholder-select-compatibility-level: Select compatibility level title-drag-and-drop-a-pdf-file-here-or-click-to-select-a-file: Drag and drop a PDF file here, or click to select a file title-logs: Logs @@ -8196,11 +8096,11 @@ tools: title: Serial Port Console description: Connect, read and send message to Serial Port texts: - label-9600: '9600' - label-19200: '19200' - label-38400: '38400' - label-57600: '57600' - label-115200: '115200' + label-9600: "9600" + label-19200: "19200" + label-38400: "38400" + label-57600: "57600" + label-115200: "115200" label-lf-n: LF (\\n) label-cr-r: CR (\\r) label-crlf-r-n: CRLF (\\r\\n) @@ -8219,15 +8119,15 @@ tools: label-text: Text label-hexadecimal: Hexadecimal label-base64: Base64 - label-secret-mode: 'Secret Mode:' + label-secret-mode: "Secret Mode:" title-share-a-secret-split: Share a secret (split) - label-secret: 'Secret:' + label-secret: "Secret:" placeholder-enter-secret-text: Enter secret text - label-threshold-minimum-shares-to-recover: 'Threshold (minimum shares to recover):' - label-number-of-shares: 'Number of shares:' + label-threshold-minimum-shares-to-recover: "Threshold (minimum shares to recover):" + label-number-of-shares: "Number of shares:" title-generated-shares: Generated Shares title-recombine-a-secret: Recombine a secret - label-your-shares: 'Your shares:' + label-your-shares: "Your shares:" placeholder-paste-your-shares-here: Paste your shares here... title-recombined-secret: Recombined secret tag-split-secret: Split Secret @@ -8236,7 +8136,7 @@ tools: title: Short Urls Expander description: Expand short urls to target full urls texts: - label-short-urls-to-expand: 'Short URLs to expand:' + label-short-urls-to-expand: "Short URLs to expand:" placeholder-enter-short-urls-one-per-line: Enter short URLs (one per line) title-result: Result tag-expand-all: Expand All @@ -8248,19 +8148,18 @@ tools: tag-open-url: Open Url cors-anywhere-configuration: CORS Anywhere Configuration self-hosted-cors-anywhere: Self Hosted CORS Anywhere - this-tools-requires-a-cors-anywhere-instance-to-bypass-cors-policy-you-can-use-a: >- + this-tools-requires-a-cors-anywhere-instance-to-bypass-cors-policy-you-can-use-a: This tools requires a CORS Anywhere instance to bypass CORS Policy. You can use a put-your-cors-anywhere-instance-url: Put your CORS Anywhere instance URL... - cors-anywhere-instance-url: 'CORS Anywhere instance URL:' + cors-anywhere-instance-url: "CORS Anywhere instance URL:" expanded-url: Expanded URL short-url: Short URL failed-to-expand-some-urls: Failed to expand some URLs. failed: Failed no-redirect: No redirect expanded: Expanded - externalAccess: >- - This tool use a CORS Anywhere instance (by default, + externalAccess: This tool use a CORS Anywhere instance (by default, https://cors.outils-libre.org) to send HEAD http request (no data downloaded) to get HTTP headers and redirects copy: @@ -8270,7 +8169,7 @@ tools: title: ARPA Decoder description: Decode IPv4/6 ARPA addresses or PTR record texts: - label-arpa-address: 'ARPA Address:' + label-arpa-address: "ARPA Address:" placeholder-e-g-10-1-168-192-in-addr-arpa-or-xxxx-ip6-arpa: e.g. 10.1.168.192.in-addr.arpa. or xxxx.ip6.arpa. database-builder: title: Database Creation Builder @@ -8281,16 +8180,16 @@ tools: label-sql-server: SQL Server label-oracle: Oracle label-sqlite: SQLite - label-database-type: 'Database Type:' - label-database-name: 'Database Name:' + label-database-type: "Database Type:" + label-database-name: "Database Name:" placeholder-test: test - label-server-address: 'Server Address:' + label-server-address: "Server Address:" placeholder-127-0-0-1: 127.0.0.1 - label-account: 'Account:' - label-password-leave-empty-to-generate: 'Password (leave empty to generate):' + label-account: "Account:" + label-password-leave-empty-to-generate: "Password (leave empty to generate):" placeholder-leave-empty-for-random: leave empty for random - label-permissions-all-privileges-if-none-selected: 'Permissions (ALL PRIVILEGES if none selected):' - title-generated-sql-instructions: 'Generated SQL Instructions:' + label-permissions-all-privileges-if-none-selected: "Permissions (ALL PRIVILEGES if none selected):" + title-generated-sql-instructions: "Generated SQL Instructions:" tag-select: SELECT tag-insert: INSERT tag-update: UPDATE @@ -8316,8 +8215,8 @@ tools: label-postgresql: PostgreSQL label-sqlite: SQLite label-sql-server: SQL Server - label-database-type: 'Database Type:' - label-database-name: 'Database Name:' + label-database-type: "Database Type:" + label-database-name: "Database Name:" placeholder-enter-database-name: Enter database name placeholder-table-name: Table name placeholder-column-name: Column name @@ -8333,17 +8232,15 @@ tools: tag-generate-sql: Generate SQL gitattributes-generator: title: Gitattributes Generator - description: >- - Generate .gitattributes from common configuration of + description: Generate .gitattributes from common configuration of https://github.com/alexkaratarakis/gitattributes texts: - label-gitattributes-templates: 'Gitattributes Templates:' + label-gitattributes-templates: "Gitattributes Templates:" placeholder-select-templates: Select templates title-preview: Preview tag-fetch-generate: Fetch & Generate snapshot-used: Using the bundled template snapshot from {0}. - externalAccess: >- - This tool downloads .gitattributes templates from + externalAccess: This tool downloads .gitattributes templates from https://github.com/gitattributes/gitattributes using the GitHub API, and falls back to a bundled snapshot when GitHub is unreachable. html-to-xhtml: @@ -8351,10 +8248,10 @@ tools: description: Convert HTML to strict XHTML (XML parsable, self closing tags...) texts: placeholder-your-html-content: Your HTML content... - label-your-html-to-convert-to-xhtml: 'Your HTML to convert to XHTML:' - label-add-xhtml-xmlns: 'Add XHTML xmlns:' - label-indentation: 'Indentation:' - title-output-xhtml: 'Output XHTML:' + label-your-html-to-convert-to-xhtml: "Your HTML to convert to XHTML:" + label-add-xhtml-xmlns: "Add XHTML xmlns:" + label-indentation: "Indentation:" + title-output-xhtml: "Output XHTML:" javascript-obfuscator: title: Javascript Obfuscator description: Javascript code obfuscator using base64 or rot13 encoding @@ -8362,9 +8259,9 @@ tools: label-base-64: Base 64 label-rot-13: ROT 13 label-obfuscator-io: Obfuscator.io - label-your-javascript-code-to-obfuscate: 'Your JavaScript code to obfuscate:' + label-your-javascript-code-to-obfuscate: "Your JavaScript code to obfuscate:" placeholder-enter-your-javascript-code-here: // Enter your JavaScript code here - label-obfuscation-method: 'Obfuscation method:' + label-obfuscation-method: "Obfuscation method:" title-obfuscted-js-code: Obfuscted JS Code online-wiktionary: title: Online Dictionary @@ -8383,14 +8280,13 @@ tools: placeholder-select-a-language: Select a language tag-search-on-wiktionary: Search on Wiktionary tag-enter-a-word-and-select-a-language-to-load-wiktionary: Enter a word and select a language to load Wiktionary - externalAccess: >- - This tool search words definitions in https://www.wiktionary.org/ (by - language) in an iframe. + externalAccess: This tool search words definitions in + https://www.wiktionary.org/ (by language) in an iframe. ptr-dns-generator: title: PTR DNS Generator description: Generate DNS PTR records texts: - label-ip-address-ipv4-or-ipv6: 'IP Address (IPv4 or IPv6):' + label-ip-address-ipv4-or-ipv6: "IP Address (IPv4 or IPv6):" placeholder-e-g-192-168-1-10-or-2001-db8-1: e.g. 192.168.1.10 or 2001:db8::1 screen-memo: title: Screen Command Cheatsheet @@ -8400,9 +8296,9 @@ tools: description: Preview SVG files texts: title-upload-a-svg-file: Upload a SVG File - title-raw-svg-content: 'Raw SVG Content:' + title-raw-svg-content: "Raw SVG Content:" placeholder-paste-raw-svg-content-here: Paste raw SVG content here... - label-select-background: 'Select background:' + label-select-background: "Select background:" title-svg-preview: SVG Preview tag-const-svgcontent-ref: const svgContent = ref tmux-memo: @@ -8415,8 +8311,8 @@ tools: text-degrees: Degrees (°) text-value: Value placeholder-enter-equation-in-terms-of-x-e-g-sin-x-cos-2-x: Enter equation in terms of x (e.g. sin(x) + cos(2*x)) - label-equation-in-term-of-x: 'Equation in term of x:' - label-domain: 'Domain:' + label-equation-in-term-of-x: "Equation in term of x:" + label-domain: "Domain:" tag-reset-zoom: Reset Zoom zellij-memo: title: Zellij Command Cheatsheet @@ -8424,14 +8320,14 @@ tools: dead-pixel: texts: title-dead-pixel-iframe: dead-pixel-iframe - tag-: '`;' - tag-keyboard-shortcuts: 'Keyboard shortcuts:' + tag-: "`;" + tag-keyboard-shortcuts: "Keyboard shortcuts:" tag-arrow-right-arrow-down-space: Arrow Right, Arrow Down, Space - tag-next-color: ': Next color' + tag-next-color: ": Next color" tag-arrow-left-arrow-up: Arrow Left, Arrow Up - tag-previous-color: ': Previous color' + tag-previous-color: ": Previous color" tag-esc: ESC - tag-exit-dead-pixel-mode: ': Exit Dead Pixel Mode' + tag-exit-dead-pixel-mode: ": Exit Dead Pixel Mode" tag-start-dead-pixel: Start Dead Pixel title: Dead Pixel Tester description: Tool to check if a pixel on your screen is dead or not. @@ -8442,14 +8338,13 @@ tools: si-converter: Goto SI Prefixes Converter geo-coordinates-converter: title: Geographic Coordinates Converter - description: >- - Convert geographic coordinates between WGS84, GCJ02, BD09, CGCS2000 and - WebMercator. Also convert between Decimal, DMS and UTM. And with an + description: Convert geographic coordinates between WGS84, GCJ02, BD09, CGCS2000 + and WebMercator. Also convert between Decimal, DMS and UTM. And with an interactive map. texts: - label-latitude: 'Latitude:' - label-longitude: 'Longitude:' - label-csv-content-lng-lat: 'CSV Content (Lng, Lat):' + label-latitude: "Latitude:" + label-longitude: "Longitude:" + label-csv-content-lng-lat: "CSV Content (Lng, Lat):" placeholder-put-your-longitude-and-latitude-in-this-order-csv-to-convert: Put your Longitude and Latitude (in this order) CSV to convert... title-conversion-results: Conversion Results title-notes: Notes @@ -8461,8 +8356,8 @@ tools: tag-webmercator-epsg3857-epsg900913: WebMercator/EPSG3857/EPSG900913 tag-convert-single: Convert Single tag-convert-batch: Convert Batch - tag-longitude-east-is-positive-west-is-negative: 'Longitude: East is positive, West is negative.' - tag-latitude-north-is-positive-south-is-negative: 'Latitude: North is positive, South is negative.' + tag-longitude-east-is-positive-west-is-negative: "Longitude: East is positive, West is negative." + tag-latitude-north-is-positive-south-is-negative: "Latitude: North is positive, South is negative." coordinates-notations: Coordinates Notations decimal-projections: Decimal Projections north: North @@ -8478,7 +8373,7 @@ tools: hemisphere: Hemisphere easting: Easting northing: Northing - label-n: 'N' + label-n: N label-s: S label-e: E label-w: W @@ -8489,9 +8384,8 @@ tools: download-results-csv: Download Results CSV batch-lat-lng-converter: Batch Lat/Lng Converter single-lat-lng-converter: Single Lat/Lng Converter - externalAccess: >- - This tool loads map tiles from OpenStreetMap or the configured tile - server; the coordinates shown are sent as tile requests. + externalAccess: This tool loads map tiles from OpenStreetMap or the configured + tile server; the coordinates shown are sent as tile requests. si-prefixes-converter: title: SI Prefixes Converter description: Convert between Metric Prefixes @@ -8524,27 +8418,25 @@ tools: label-auto: Auto label-fixed: Fixed label-exponential: Exponential - label-convert: 'Convert:' - label-mode: 'Mode:' - label-decimals: 'Decimals:' - label-thousand-separators: 'Thousand separators:' - label-to: 'To:' - tag-: '=' + label-convert: "Convert:" + label-mode: "Mode:" + label-decimals: "Decimals:" + label-thousand-separators: "Thousand separators:" + label-to: "To:" + tag-: = acceleration-converter: title: Acceleration Converter description: Convert values between acceleration units - externalAccess: 'null' + externalAccess: "null" texts: label-g-force: g-force label-meter-per-second-squared: meter per second squared docker-image-downloader: title: Docker Image Downloader - description: >- - Download a docker image given a docker registry, an architecture and an - image name - externalAccess: >- - This tool downloads Docker Images from registry (and with username, - password or token you provide) + description: Download a docker image given a docker registry, an architecture + and an image name + externalAccess: This tool downloads Docker Images from registry (and with + username, password or token you provide) texts: label-linux-amd64: linux/amd64 label-linux-arm64: linux/arm64 @@ -8553,61 +8445,60 @@ tools: label-linux-ppc64le: linux/ppc64le label-linux-s390x: linux/s390x label-windows-amd64: windows/amd64 - label-docker-image-download-service-url: 'Docker Image Download Service Url:' + label-docker-image-download-service-url: "Docker Image Download Service Url:" placeholder-http-localhost-3000: http://localhost:3000 - label-basic-authentication: 'Basic Authentication:' + label-basic-authentication: "Basic Authentication:" placeholder-username-password: username:password - label-docker-image: 'Docker Image:' + label-docker-image: "Docker Image:" placeholder-alpine-latest: alpine:latest - label-platform: 'Platform:' - label-registry-url: 'Registry Url:' + label-platform: "Platform:" + label-registry-url: "Registry Url:" placeholder-myregistry-com-optional: myregistry.com (optional) - label-username: 'Username:' + label-username: "Username:" placeholder-optional: Optional - label-password: 'Password:' + label-password: "Password:" title-error: Error tag-docker-image-download-service-configuration-self-hosted: Docker Image Download Service Configuration (self hosted) - tag-you-must-self-host-docker-image-download-service-see: 'You must self host Docker Image Download Service. See:' + tag-you-must-self-host-docker-image-download-service-see: "You must self host Docker Image Download Service. See:" tag-docker-image-download-service-install: Docker Image Download Service install tag-download-image: Download Image epub-to-markdown: title: Epub to Markdown description: Convert an EPUB file to full markdown content - externalAccess: 'null' + externalAccess: "null" texts: label-markdown: Markdown label-plain-text: Plain Text - label-format: 'Format:' + label-format: "Format:" title-drop-an-epub-file-here-or-click-to-select-a-file: Drop an EPUB file here or click to select a file title-metadata: Metadata - label-title: 'Title:' - label-creator: 'Creator:' - label-language: 'Language:' - label-publisher: 'Publisher:' - label-identifier: 'Identifier:' - label-rights: 'Rights:' - label-description: 'Description:' + label-title: "Title:" + label-creator: "Creator:" + label-language: "Language:" + label-publisher: "Publisher:" + label-identifier: "Identifier:" + label-rights: "Rights:" + label-description: "Description:" title-epub-content: Epub Content explainshell: title: Explain Shell Command description: Use explainshell.com (or a self hosted) to explain a shell command - externalAccess: >- - This tool calls https://explainshell.com (unless you self host it) this - provided shell command. + externalAccess: This tool calls https://explainshell.com (unless you self host + it) this provided shell command. texts: - label-custom-explain-shell-url: 'Custom Explain Shell Url:' + label-custom-explain-shell-url: "Custom Explain Shell Url:" placeholder-put-your-custom-explainshell-url-here: Put your custom explainshell url here... - label-shell-command: 'Shell command:' + label-shell-command: "Shell command:" placeholder-shell-command-to-explain: Shell command to explain tag-explain-shell-configuration: Explain Shell Configuration - tag-you-can-self-host-explain-shell-to-get-total-privacy-see: 'You can self host Explain Shell, to get total privacy. See:' + tag-you-can-self-host-explain-shell-to-get-total-privacy-see: "You can self host Explain Shell, to get total privacy. See:" tag-local-explain-shell-docker-install: Local Explain Shell docker install tag-explain: Explain tag-enter-a-shell-command-to-explain: Enter a shell command to explain frequency-converter: title: Frequency Converter description: Convert values between frequency units - externalAccess: 'null' + externalAccess: "null" texts: label-hertz: hertz label-millihertz: millihertz @@ -8621,44 +8512,43 @@ tools: markdown-to-text: title: Markdown to Text description: Convert markdown to plain text - externalAccess: 'null' + externalAccess: "null" texts: - label-input-mardown: 'Input Mardown:' + label-input-mardown: "Input Mardown:" placeholder-enter-your-markdown-here: Enter your Markdown here... title-output-text: Output text rj45-memo: title: RJ45 Cat6 Wiring Cheatsheet description: Complete RJ45 Cat6 Wiring cheatsheet - externalAccess: 'null' + externalAccess: "null" rsvp-reader: title: RSVP Reader - description: >- - A Rapid Serial Visual Presentation (RSVP) tool that lets you paste text, - and have the words displayed one at a time at a configurable + description: A Rapid Serial Visual Presentation (RSVP) tool that lets you paste + text, and have the words displayed one at a time at a configurable words-per-minute (WPM) value. - externalAccess: 'null' + externalAccess: "null" texts: - label-text-to-read: 'Text to read:' + label-text-to-read: "Text to read:" placeholder-paste-or-type-your-text-here: Paste or type your text here... title-drop-an-pdf-epub-or-txt-file-here-or-click-to-select-a-file: Drop an PDF, EPUB or txt file here or click to select a file - label-word-per-minute: 'Word per minute:' - label-chunk-size: 'Chunk size:' + label-word-per-minute: "Word per minute:" + label-chunk-size: "Chunk size:" label-large-chunk-slowdown: Large chunk slowdown (%) title-pauses: Pauses (%) label-sentence-end: Sentence end label-paragraph-end: Paragraph end label-punctuation: Punctuation title-appearance: Appearance - label-font-size: 'Font size:' - label-font-color: 'Font color:' - label-background: 'Background:' + label-font-size: "Font size:" + label-font-color: "Font color:" + label-background: "Background:" tag-no-text-to-read-please-input-some-text-in-text-tab: No text to read. Please input some text in Text tab. tag-play-space: Play (space) tag-pause-space: Pause (space) tag-back: Back (←) tag-next: Next (→) tag-reset: Reset - tag-or: '- OR -' + tag-or: "- OR -" tag-control-playback-and-navigation-without-touching-the-mouse: Control playback and navigation without touching the mouse. tag-shortcut: Shortcut tag-action: Action @@ -8689,7 +8579,7 @@ tools: speed-converter: title: Speed Converter description: Convert values between speed units - externalAccess: 'null' + externalAccess: "null" texts: label-meter-per-second: meter per second label-kilometer-per-hour: kilometer per hour @@ -8699,7 +8589,7 @@ tools: tab-to-spaces: title: Tab to Spaces description: Convert tab to multiple spaces - externalAccess: 'null' + externalAccess: "null" texts: label-spaces-per-tab: Spaces per tab label-convert-only-leading-tabs: Convert only leading tabs @@ -8707,30 +8597,29 @@ tools: title-input-with-tabs: Input (with tabs) placeholder-paste-text-with-tabs-here: Paste text with tabs here... title-output-with-spaces: Output (with spaces) - tag-0x00-chr: '= 0x00 && chr' - tag-0xa0-chr: '= 0xA0 && chr' - tag-0xff61-chr: '= 0xFF61 && chr' - tag-0xf8f1-chr: '= 0xF8F1 && chr' + tag-0x00-chr: = 0x00 && chr + tag-0xa0-chr: = 0xA0 && chr + tag-0xff61-chr: = 0xFF61 && chr + tag-0xf8f1-chr: = 0xF8F1 && chr tcp-udp-port-tester: title: TCP/UDP Port Tester description: Allows to test TCP/UDP (using a websocket proxy on server side) - externalAccess: >- - This tool needs a server side WebSocket server + externalAccess: This tool needs a server side WebSocket server (https://github.com/sharevb/ws-tcp-udp-bridge) texts: label-tcp: TCP label-udp: UDP - label-websocket-tcp-udp-bridge-url: 'WebSocket TCP/UDP Bridge Url:' + label-websocket-tcp-udp-bridge-url: "WebSocket TCP/UDP Bridge Url:" placeholder-websocket-url: WebSocket URL - label-target: 'Target:' + label-target: "Target:" placeholder-target-ip: Target IP placeholder-port: Port placeholder-protocol: Protocol title-logs: Logs title-payload-builder: Payload Builder - label-send-text-payload-can-add-r-n: 'Send Text payload (can add \r \n):' + label-send-text-payload-can-add-r-n: "Send Text payload (can add \\r \\n):" placeholder-text-payload: Text payload - label-send-hex-payload: 'Send Hex payload:' + label-send-hex-payload: "Send Hex payload:" placeholder-hex-payload-e-g-48656c6c6f: Hex payload (e.g. 48656c6c6f) tag-websocket-tcp-udp-bridge-configuration: WebSocket TCP/UDP Bridge Configuration tag-to-use-this-tool-you-need-to-host-a-websocket-tcp-udp-bridge-based-on: To use this tool, you need to host a WebSocket TCP/UDP Bridge based on @@ -8744,21 +8633,21 @@ tools: connected-to-websocket-bridge: ✅ Connected to WebSocket bridge disconnected: 🔌 Disconnected no-active-connection: ⚠️ No active connection - sent-text: '➡️ Sent text:' + sent-text: "➡️ Sent text:" configured: ⚙️ Configured - sent-hex: '➡️ Sent hex:' + sent-hex: "➡️ Sent hex:" disconnecting: 🔻 Disconnecting... - error: '❌ Error:' - end: '🛑 End:' - text: '📩 Text:' - binary: '📩 Binary:' + error: "❌ Error:" + end: "🛑 End:" + text: "📩 Text:" + binary: "📩 Binary:" text: connected: Connected disconnected: Disconnected volume-flow-rate-converter: title: Volume Flow Rate Converter description: Convert values between volume flow rate units - externalAccess: 'null' + externalAccess: "null" texts: label-cubic-millimeters-per-second: cubic millimeters per second label-cubic-centimeters-per-second: cubic centimeters per second @@ -8807,7 +8696,7 @@ tools: thursday: Thursday friday: Friday saturday: Saturday - invalid-year-length-hebrew_year_days-hebcal-0-days: 'Invalid year length: {0} days.' + invalid-year-length-hebrew_year_days-hebcal-0-days: "Invalid year length: {0} days." common-deficient-353-days: Common deficient (353 days) common-regular-354-days: Common regular (354 days) common-complete-355-days: Common complete (355 days) @@ -8817,11 +8706,10 @@ tools: normal-year: Normal year leap-year: Leap year title: Calendar Converter - description: >- - Convert dates and times between Gregorian, Julian, Hebrew, Islamic, + description: Convert dates and times between Gregorian, Julian, Hebrew, Islamic, Persian, Mayan, Indian, French Republican, ISO‑8601, Unix time, and Excel serial formats - externalAccess: 'null' + externalAccess: "null" texts: label-january: January label-february: February @@ -8918,67 +8806,67 @@ tools: label-révolution-6: Révolution (6) tab-gregorian: Gregorian label-date: Date - label-leap: 'Leap:' - label-time: 'Time:' - label-weekday: 'Weekday:' + label-leap: "Leap:" + label-time: "Time:" + label-weekday: "Weekday:" tab-julian-day: Julian Day - label-julian-day: 'Julian Day:' + label-julian-day: "Julian Day:" tab-modified-julian: Modified Julian - label-modified-julian-day: 'Modified Julian Day:' + label-modified-julian-day: "Modified Julian Day:" tab-julian-calendar: Julian Calendar tab-gregorian-serial: Gregorian Serial - label-gregorian-serial-day: 'Gregorian Serial Day:' + label-gregorian-serial-day: "Gregorian Serial Day:" tab-hebrew: Hebrew tab-islamic: Islamic tab-persian: Persian tab-persian-algorithmic: Persian Algorithmic tab-mayan: Mayan - label-long-count: 'Long Count:' + label-long-count: "Long Count:" label-haab: Haab label-tzolkin: Tzolkin tab-indian-civil: Indian Civil tab-french-republican: French Republican - label-day: 'Day:' - label-month: 'Month:' - label-décade: 'Décade:' - label-year: 'Year:' + label-day: "Day:" + label-month: "Month:" + label-décade: "Décade:" + label-year: "Year:" tab-iso-8601: ISO‑8601 - label-day-of-week: 'Day of Week:' - label-week: 'Week:' - label-day-of-year: 'Day of Year:' + label-day-of-week: "Day of Week:" + label-week: "Week:" + label-day-of-year: "Day of Year:" tab-unix-time: Unix time() - label-unix-time: 'Unix time():' + label-unix-time: "Unix time():" tab-excel-1900-windows: Excel 1900 (Windows) - label-excel-serial-day-1900: 'Excel Serial Day (1900):' + label-excel-serial-day-1900: "Excel Serial Day (1900):" tab-excel-1904-macintosh: Excel 1904 (Macintosh) - label-excel-serial-day-1904: 'Excel Serial Day (1904):' + label-excel-serial-day-1904: "Excel Serial Day (1904):" tag-this-is-a-port-of-wonderful: This is a port of wonderful tag-fourmilab-ch-calendar-converter: Fourmilab.ch Calendar converter tag-by-john-walker: by John Walker - tag-xa0-xa0: ' . ' + tag-xa0-xa0: " . " tag-update-other-calendars: Update other calendars tag-today: Today bech32: title: Bech32 Encoder/Decoder description: Encode/Decode/Validate betch32(m) - externalAccess: 'null' + externalAccess: "null" texts: label-bech32: Bech32 label-bech32m: Bech32m tab-decode: Decode - label-bech32-m-string: 'Bech32(m) string:' + label-bech32-m-string: "Bech32(m) string:" placeholder-bech32-bech32m-string: Bech32 / Bech32m string - label-variant: 'Variant:' - label-hrp: 'HRP:' + label-variant: "Variant:" + label-hrp: "HRP:" placeholder-hrp: HRP - label-payload: 'Payload:' + label-payload: "Payload:" placeholder-hex-payload: Hex payload placeholder-variant: Variant tab-encode: Encode - label-encoded-bech32-string: 'Encoded bech32 string:' + label-encoded-bech32-string: "Encoded bech32 string:" placeholder-bech32-string: bech32 string tab-batch: Batch - label-bech32-strings-one-per-line: 'Bech32 strings (one per line):' + label-bech32-strings-one-per-line: "Bech32 strings (one per line):" placeholder-one-bech32-string-per-line: One Bech32 string per line title-results: Results tag-auto-detect: Auto-detect @@ -8999,65 +8887,64 @@ tools: docker-pangolin-labels: title: Docker Pangolin Labels description: Convert Docker Compose Pangolin labels to blueprints and vice versa - externalAccess: 'null' + externalAccess: "null" texts: tab-compose-blueprint: Compose → Blueprint - label-docker-compose-yaml: 'Docker Compose YAML:' + label-docker-compose-yaml: "Docker Compose YAML:" placeholder-paste-full-docker-compose-yml-here: Paste full docker-compose.yml here… - label-generated-blueprint: 'Generated Blueprint:' + label-generated-blueprint: "Generated Blueprint:" placeholder-blueprint-yaml-will-appear-here: Blueprint YAML will appear here… tab-blueprint-labels: Blueprint → Labels - label-blueprint-yaml: 'Blueprint YAML:' + label-blueprint-yaml: "Blueprint YAML:" placeholder-paste-pangolin-blueprint-yaml-here: Paste Pangolin blueprint YAML here… - label-generated-docker-labels: 'Generated Docker labels:' + label-generated-docker-labels: "Generated Docker labels:" placeholder-docker-labels-will-appear-here: Docker labels will appear here... tag-extract-pangolin-blueprint: Extract Pangolin Blueprint tag-array-key-value: Array (- key=value) - tag-object-key-value: 'Object (key: value)' + tag-object-key-value: "Object (key: value)" tag-convert-to-docker-labels: Convert to Docker Labels invalid-blueprint-yaml: Invalid blueprint YAML fitness-computer: title: Fitness Computer - description: >- - Compute BMR (Basal Metabolic Rate), TDEE / Calories (Total Daily Energy - Expenditure), BMI (Body Mass Index), Ideal Weight (Ideal Body Weight), - Body Fat (Body Fat Percentage), Max HR (Maximum Heart Rate): key metrics - used to assess overall fitness and physiological health. - externalAccess: 'null' + description: "Compute BMR (Basal Metabolic Rate), TDEE / Calories (Total Daily + Energy Expenditure), BMI (Body Mass Index), Ideal Weight (Ideal Body + Weight), Body Fat (Body Fat Percentage), Max HR (Maximum Heart Rate): key + metrics used to assess overall fitness and physiological health." + externalAccess: "null" texts: label-bmr: BMR label-tdee-calories: TDEE/Calories - label-bmi: 'BMI:' - label-ideal-weight: 'Ideal Weight:' + label-bmi: "BMI:" + label-ideal-weight: "Ideal Weight:" label-body-fat-us-navy: Body Fat (US Navy) label-body-fat-bmi: Body Fat (BMI) label-max-heart-rate: Max Heart Rate - label-sedentary-little-or-no-exercise: 'Sedentary: little or no exercise' - label-light-exercise-1-3-times-week: 'Light: exercise 1-3 times/week' - label-moderate-exercise-4-5-times-week: 'Moderate: exercise 4-5 times/week' - label-active-daily-exercise-or-intense-exercise-3-4-times-week: 'Active: daily exercise or intense exercise 3-4 times/week' - label-very-active-intense-exercise-6-7-times-week: 'Very Active: intense exercise 6-7 times/week' - label-extra-active-very-intense-exercise-daily-or-physical-job: 'Extra Active: very intense exercise daily, or physical job' - label-units: 'Units:' - label-formula: 'Formula:' - label-gender: 'Gender:' - label-age: 'Age:' + label-sedentary-little-or-no-exercise: "Sedentary: little or no exercise" + label-light-exercise-1-3-times-week: "Light: exercise 1-3 times/week" + label-moderate-exercise-4-5-times-week: "Moderate: exercise 4-5 times/week" + label-active-daily-exercise-or-intense-exercise-3-4-times-week: "Active: daily exercise or intense exercise 3-4 times/week" + label-very-active-intense-exercise-6-7-times-week: "Very Active: intense exercise 6-7 times/week" + label-extra-active-very-intense-exercise-daily-or-physical-job: "Extra Active: very intense exercise daily, or physical job" + label-units: "Units:" + label-formula: "Formula:" + label-gender: "Gender:" + label-age: "Age:" title-body-measurements: Body Measurements - label-activity-level: 'Activity Level:' + label-activity-level: "Activity Level:" title-results: Results - label-bmr-kcal-day: 'BMR (kcal/day):' - label-tdee-calories-kcal-day: 'TDEE/Calories (kcal/day):' - label-bmi-category: 'BMI Category:' - label-healthy-range-min: 'Healthy Range (min):' - label-healthy-range-max: 'Healthy Range (max):' - label-devine-1974: '— (Devine 1974):' - label-hamwi-1964: '— (Hamwi 1964):' - label-miller-1983: '— (Miller 1983):' - label-robinson-1983: '— (Robinson 1983):' - label-body-fat: 'Body Fat (%):' - label-fat-mass: 'Fat Mass:' - label-lean-mass: 'Lean Mass:' - label-max-heart-rate-bpm: 'Max Heart Rate (bpm):' + label-bmr-kcal-day: "BMR (kcal/day):" + label-tdee-calories-kcal-day: "TDEE/Calories (kcal/day):" + label-bmi-category: "BMI Category:" + label-healthy-range-min: "Healthy Range (min):" + label-healthy-range-max: "Healthy Range (max):" + label-devine-1974: "— (Devine 1974):" + label-hamwi-1964: "— (Hamwi 1964):" + label-miller-1983: "— (Miller 1983):" + label-robinson-1983: "— (Robinson 1983):" + label-body-fat: "Body Fat (%):" + label-fat-mass: "Fat Mass:" + label-lean-mass: "Lean Mass:" + label-max-heart-rate-bpm: "Max Heart Rate (bpm):" tag-metric-kg-cm: Metric (kg, cm) tag-us-lbs-inches: US (lbs, inches) tag-male: Male @@ -9065,17 +8952,17 @@ tools: food-energy-converter: title: Food Energy Converter description: Convert between food (joule, calories) - externalAccess: 'null' + externalAccess: "null" iso-639-searcher: title: ISO 639 Searcher description: Search in ISO 639-1/2T/2B/3 language codes - externalAccess: 'null' + externalAccess: "null" texts: placeholder-search-iso-639-language-code-by-iso-1-iso-2t-2b-iso-3-name: Search iso-639 language code by iso-1, iso-2T/2B, iso-3, name... - label-max-results: 'Max results:' - label-2b: '2B:' - label-2t: '2T:' - label-eng: 'ENG:' + label-max-results: "Max results:" + label-2b: "2B:" + label-2t: "2T:" + label-eng: "ENG:" tag-no-results: No results tag-search-results: Search Results tag-iso-639-1: iso-639-1 @@ -9085,33 +8972,32 @@ tools: loading-more-results: Loading more results... jasypt-string-encryption: title: Jasypt String Encryption - description: >- - Encrypt and decrypt strings using the Jasypt (Java Simplified Encryption) - standard. - externalAccess: 'null' + description: Encrypt and decrypt strings using the Jasypt (Java Simplified + Encryption) standard. + externalAccess: "null" texts: - label-mode: 'Mode:' - label-password-secret-key: 'Password (Secret Key):' + label-mode: "Mode:" + label-password-secret-key: "Password (Secret Key):" placeholder-enter-jasypt-password-salt-secret-key: Enter Jasypt password (salt / secret key) title-results: Results - label-decoded: 'Decoded:' - label-raw: 'Raw:' - label-enc-form: 'ENC Form:' + label-decoded: "Decoded:" + label-raw: "Raw:" + label-enc-form: "ENC Form:" tag-encrypt: Encrypt tag-decrypt: Decrypt - plain-text: 'Plain Text:' - jasypt-encrypted-string: 'Jasypt Encrypted String:' + plain-text: "Plain Text:" + jasypt-encrypted-string: "Jasypt Encrypted String:" text-to-encrypt-e-g-db-password: Text to encrypt (e.g. DB password) encrypted-value-e-g-enc-or-raw-jasypt-string: Encrypted value (e.g. ENC(...)) or raw Jasypt string k8s-rbac-generator: title: Kubernetes RBAC Generator description: Generate k8s RBAC policy YAML - externalAccess: 'null' + externalAccess: "null" texts: label-user: User label-group: Group label-serviceaccount: ServiceAccount - label-role-name: 'Role Name:' + label-role-name: "Role Name:" label-role-type: Role Type label-namespace: Namespace title-rules: Rules @@ -9136,7 +9022,7 @@ tools: objgen-html: title: ObjGen to HTML description: Generate xomplex HTML from TOML like syntax - externalAccess: 'null' + externalAccess: "null" texts: input-label-objgen-html-definition: ObjGen HTML definition input-placeholder-put-your-objgen-html-definition-here: Put your ObjGen HTML definition here... @@ -9145,7 +9031,7 @@ tools: objgen-json: title: ObjGen to JSON description: Generate xomplex JSON from TOML like syntax - externalAccess: 'null' + externalAccess: "null" texts: input-label-objgen-json-definition: ObjGen JSON definition input-placeholder-put-your-objgen-json-definition-here: Put your ObjGen JSON definition here... @@ -9154,15 +9040,15 @@ tools: pgp-file-encryption: title: PGP File Encryption description: Encrypt and decrypt files using PGP - externalAccess: 'null' + externalAccess: "null" texts: title-1-select-a-file: 1. Select a file title-drag-and-drop-a-file-or-click-to-select: Drag and drop a file or click to select title-2-public-key-for-encryption: 2. Public key (for encryption) title-3-private-key-passphrase-for-decryption: 3. Private key + passphrase (for decryption) - label-passphrase: 'Passphrase:' + label-passphrase: "Passphrase:" placeholder-passphrase: Passphrase - tag-selected-file: 'Selected file:' + tag-selected-file: "Selected file:" tag-encrypt-stream: Encrypt (stream) tag-decrypt-stream: Decrypt (stream) tag-encrypting: Encrypting… @@ -9174,25 +9060,24 @@ tools: remove-background: title: Remove Image Background description: Remove background from an image using AI - externalAccess: >- - Downloads Remove Background models from Hugging Face (or the configured - models mirror). Processing is done in your browser. + externalAccess: Downloads Remove Background models from Hugging Face (or the + configured models mirror). Processing is done in your browser. texts: label-rmbg-1-4-cpu-wasm: RMBG‑1.4 (CPU/WASM) label-modnet-webgpu: MODNet (WebGPU) label-transparent: Transparent label-solid-color: Solid Color - label-pattern: 'Pattern:' + label-pattern: "Pattern:" label-blurred-original: Blurred Original label-adjust-contrast-brightness: Adjust Contrast/Brightness label-diagonal-stripes: Diagonal Stripes label-dots: Dots label-checkerboard: Checkerboard title-drag-and-drop-an-image-or-click-to-select: Drag and drop an image or click to select - label-model: 'Model:' - label-blur: 'Blur:' - label-contrast: 'Contrast:' - label-brightness: 'Brightness:' + label-model: "Model:" + label-blur: "Blur:" + label-contrast: "Contrast:" + label-brightness: "Brightness:" title-original: Original title-result: Result tag-apply-background: Apply Background @@ -9200,7 +9085,7 @@ tools: shell-formatter: title: Shell Commands Formatter description: Format shell commands as multiline shell commands split on arguments - externalAccess: 'null' + externalAccess: "null" texts: input-label-shell-commands-to-format: Shell commands to format input-placeholder-put-your-shell-commands-to-format-here: Put your shell commands to format here... @@ -9208,7 +9093,7 @@ tools: shell-linearizer: title: Shell Commands Linearizer description: Linearize multiline shell commands - externalAccess: 'null' + externalAccess: "null" texts: input-label-shell-commands-to-linearize: Shell commands to linearize input-placeholder-put-your-shell-commands-to-linearize-here: Put your shell commands to linearize here... @@ -9216,7 +9101,7 @@ tools: ufw-generator: title: UFW Command Generator description: Generate UFW command lines - externalAccess: 'null' + externalAccess: "null" texts: label-allow: Allow label-deny: Deny @@ -9227,41 +9112,40 @@ tools: label-tcp: TCP label-udp: UDP label-any: Any - label-action: 'Action:' - label-direction: 'Direction:' - label-protocol: 'Protocol:' - label-port: 'Port:' - placeholder-80: '80' - label-port-to-range: 'Port to (range):' - placeholder-443: '443' - label-from-ip: 'From IP:' + label-action: "Action:" + label-direction: "Direction:" + label-protocol: "Protocol:" + label-port: "Port:" + placeholder-80: "80" + label-port-to-range: "Port to (range):" + placeholder-443: "443" + label-from-ip: "From IP:" placeholder-192-168-1-10: 192.168.1.10 - label-to-ip: 'To IP:' + label-to-ip: "To IP:" placeholder-10-0-0-5: 10.0.0.5 - label-interface: 'Interface:' + label-interface: "Interface:" placeholder-eth0: eth0 - label-logging: 'Logging:' - label-comment: 'Comment:' + label-logging: "Logging:" + label-comment: "Comment:" placeholder-optional-comment: Optional comment title-generated-command: Generated Command missing-port: Missing port visual-subnet-calculator: title: Visual Subnet Calculator - description: >- - A tool for quickly designing networks and collaborating on that design - with others. It focuses on expediting the work of network administrators, - not academic subnetting math. - externalAccess: 'null' + description: A tool for quickly designing networks and collaborating on that + design with others. It focuses on expediting the work of network + administrators, not academic subnetting math. + externalAccess: "null" zalgo: title: Zalgo Generator/Banner description: Generate Zalgo text and clean zalgo generated text - externalAccess: 'null' + externalAccess: "null" texts: text-zalgo-text-copied: Zalgo text copied! title-zalgo-text-generation: Zalgo Text Generation placeholder-put-your-string-here: Put your string here... label-text-to-decorate-with-zalgo: Text to decorate with Zalgo - label-intensity: 'Intensity:' + label-intensity: "Intensity:" title-zalgo-text: Zalgo text title-zalgo-cleaner: Zalgo cleaner placeholder-put-zalgo-text-to-clean-here: Put zalgo text to clean here... @@ -9281,19 +9165,17 @@ tools: gif-to-mp4: title: GIF to MP4 description: Convert GIF to MP4 using ffmpeg - externalAccess: 'null' + externalAccess: "null" texts: - label-stream-loop: 'Stream Loop:' + label-stream-loop: "Stream Loop:" title-drag-and-drop-gif-here-or-click-to-select-a-file: Drag and drop GIF here or click to select a file title-logs: Logs html-to-pdf: title: HTML to PDF - description: >- - Generate PDF from HTML content or URL with format selection and auto hide - cookie banners - externalAccess: >- - This tool sends URLs and HTML content to the *self hosted* Puppeteer - webservice configured. + description: Generate PDF from HTML content or URL with format selection and + auto hide cookie banners + externalAccess: This tool sends URLs and HTML content to the *self hosted* + Puppeteer webservice configured. texts: label-a2: A2 label-a3: A3 @@ -9301,33 +9183,33 @@ tools: label-a5: A5 label-letter: Letter label-legal: Legal - label-html-to-pdf-service-url: 'HTML to PDF Service Url:' + label-html-to-pdf-service-url: "HTML to PDF Service Url:" placeholder-http-localhost-3000: http://localhost:3000 - label-basic-authentication: 'Basic Authentication:' + label-basic-authentication: "Basic Authentication:" placeholder-username-password: username:password tab-url-pdf: URL → PDF - label-url: 'URL:' + label-url: "URL:" placeholder-https-example-com: https://example.com tab-html-pdf: HTML → PDF - label-html-content: 'HTML Content:' + label-html-content: "HTML Content:" tab-batch-url-pdf: Batch URL → PDF - label-urls-one-per-line: 'URLs (one per line):' + label-urls-one-per-line: "URLs (one per line):" title-results: Results tab-custom-pdf-options: Custom PDF Options - label-format: 'Format:' - label-language: 'Language:' + label-format: "Format:" + label-language: "Language:" placeholder-en-us: en-US - label-landscape: 'Landscape:' - label-one-long-page: 'One Long Page:' - label-auto-hide-cookie-banners: 'Auto-Hide Cookie Banners:' - label-print-background: 'Print Background:' + label-landscape: "Landscape:" + label-one-long-page: "One Long Page:" + label-auto-hide-cookie-banners: "Auto-Hide Cookie Banners:" + label-print-background: "Print Background:" title-margins: Margins - label-top-mm: 'Top (mm):' - label-bottom-mm: 'Bottom (mm):' - label-left-mm: 'Left (mm):' - label-right-mm: 'Right (mm):' + label-top-mm: "Top (mm):" + label-bottom-mm: "Bottom (mm):" + label-left-mm: "Left (mm):" + label-right-mm: "Right (mm):" tag-html-to-pdf-service-configuration-self-hosted: HTML to PDF Service Configuration (self hosted) - tag-you-must-self-host-html-to-pdf-service-see: 'You must self host HTML to PDF Service. See:' + tag-you-must-self-host-html-to-pdf-service-see: "You must self host HTML to PDF Service. See:" tag-html-to-pdf-service-install: HTML to PDF Service install tag-generate-pdf: Generate PDF tag-generate-pdfs: Generate PDFs @@ -9338,31 +9220,31 @@ tools: shutdown-command-generator: title: Shutdown Command Generator description: Generate shutdown command for various OS - externalAccess: 'null' + externalAccess: "null" texts: label-windows: Windows label-linux: Linux label-macos: macOS - label-delay: 'Delay:' + label-delay: "Delay:" label-specific-time: Specific Time - label-platform: 'Platform:' - label-shutdown-time: 'Shutdown time:' + label-platform: "Platform:" + label-shutdown-time: "Shutdown time:" label-force: Force label-reboot: Reboot label-logoff: Logoff label-cancel: Cancel label-hibernate: Hibernate title-generated-command: Generated command - tag-nbsp-h-nbsp: ' h ' - tag-nbsp-m-nbsp: ' m ' - tag-nbsp-s: ' s' + tag-nbsp-h-nbsp: " h " + tag-nbsp-m-nbsp: " m " + tag-nbsp-s: " s" random-line-picker: title: Random Line Picker description: Pick random lines from a text input - externalAccess: 'null' + externalAccess: "null" texts: label-allow-repeated-lines: Allow repeated lines - label-number-of-lines-to-pick: 'Number of lines to pick:' + label-number-of-lines-to-pick: "Number of lines to pick:" label-prefix-lines-with-line-number: Add line numbers placeholder-picked-lines: Picked lines placeholder-put-your-text-here: Put your text here... @@ -9371,25 +9253,24 @@ tools: text-picked-lines-copied-to-clipboard: Picked lines copied to clipboard! markdown-to-data: texts: - label-paste-your-markdown-content: 'Paste your markdown content:' + label-paste-your-markdown-content: "Paste your markdown content:" placeholder-your-markdown: Your markdown... title: Markdown to data - description: >- - Convert Markdown table to JSON, YAML, CSV, SQL INSERT, XML, Markdown or - XLSX - externalAccess: 'null' + description: Convert Markdown table to JSON, YAML, CSV, SQL INSERT, XML, + Markdown or XLSX + externalAccess: "null" html-to-data: texts: - label-paste-your-html-content: 'Paste your HTML content:' + label-paste-your-html-content: "Paste your HTML content:" placeholder-your-html: Your HTML here... error-multiple-json-blocks: Cannot convert multiple tables at once title: HTML to data description: Convert HTML table to JSON, YAML, CSV, SQL INSERT, XML, Markdown or XLSX - externalAccess: 'null' + externalAccess: "null" cron-expression-builder: title: Cron Expression Builder description: Generate Cron expressions from a UI - externalAccess: 'null' + externalAccess: "null" texts: label-seconds: Seconds label-minutes: Minutes @@ -9423,20 +9304,20 @@ tools: label-increment: Increment title-generated-cron-expression: Generated Cron Expression title-validation-errors: Validation Errors - label-mode: 'Mode:' - label-from: 'From:' - label-to: 'To:' - label-start-at: 'Start at:' + label-mode: "Mode:" + label-from: "From:" + label-to: "To:" + label-start-at: "Start at:" tag-cron-expression-is-invalid: Cron expression is invalid paste-cron-expression: Paste Cron Expression e-g-5-0-12-1-2025: e.g. */5 0 12 * * 1 2025 0-6-sunday-0-monday-1-saturday-6: 0-6 (Sunday=0, Monday=1, ..., Saturday=6) - label-select-at-least-one-value: '{0}: select at least one value' + label-select-at-least-one-value: "{0}: select at least one value" day-of-month-and-day-of-week-cannot-both-be-specific: Day of Month and Day of Week cannot both be specific - label-start-cannot-be-greater-than-end: '{0}: start cannot be greater than end' - label-start-must-be-within-allowed-range: '{0}: start must be within allowed range' - label-step-must-be-greater-than-1: '{0}: step must be >= 1' - label-start-cannot-be-greater-than-end-0: '{0}: start cannot be greater than end' + label-start-cannot-be-greater-than-end: "{0}: start cannot be greater than end" + label-start-must-be-within-allowed-range: "{0}: start must be within allowed range" + label-step-must-be-greater-than-1: "{0}: step must be >= 1" + label-start-cannot-be-greater-than-end-0: "{0}: start cannot be greater than end" seconds: Seconds minutes: Minutes hours: Hours @@ -9447,13 +9328,13 @@ tools: css-js-prettify-minify: title: CSS/JS Prettify & Minify description: Prettify or minify your CSS and JavaScript code online. - externalAccess: 'null' + externalAccess: "null" texts: label-javascript: JavaScript label-css: CSS label-language: Language label-indent-size: Indent size - placeholder-2: '2' + placeholder-2: "2" title-prettify: Prettify label-your-code: Your code placeholder-paste-your-code-to-prettify: Paste your code to prettify... @@ -9464,29 +9345,28 @@ tools: dns-propagation-tester: title: DNS Propagation Tester description: A simple tool for testing DNS propagation across different servers. - externalAccess: >- - This tool calls your Self Host Network Utilities Service to perform DNS - queries. + externalAccess: This tool calls your Self Host Network Utilities Service to + perform DNS queries. texts: - label-network-utilities-service-url: 'Network Utilities Service Url:' + label-network-utilities-service-url: "Network Utilities Service Url:" placeholder-http-localhost-3000: http://localhost:3000 - label-basic-authentication: 'Basic Authentication:' + label-basic-authentication: "Basic Authentication:" placeholder-username-password: username:password tab-dns-propagation: DNS Propagation - label-domain: 'Domain:' + label-domain: "Domain:" placeholder-example-com: example.com - label-record-type: 'Record Type:' + label-record-type: "Record Type:" title-resolvers-to-check: Resolvers to Check title-results: Results tab-custom-resolvers: Custom Resolvers title-add-custom-resolver: Add Custom Resolver - label-resolver-name: 'Resolver Name:' + label-resolver-name: "Resolver Name:" placeholder-resolver-name-e-g-my-dns: Resolver name (e.g. My DNS) - label-resolver-ip: 'Resolver IP:' + label-resolver-ip: "Resolver IP:" placeholder-resolver-ip-e-g-10-0-0-1: Resolver IP (e.g. 10.0.0.1) title-your-custom-resolvers: Your Custom Resolvers tag-network-utilities-service-configuration-self-hosted: Network Utilities Service Configuration (self hosted) - tag-you-must-self-host-network-utilities-service-see: 'You must self host Network Utilities Service. See:' + tag-you-must-self-host-network-utilities-service-see: "You must self host Network Utilities Service. See:" tag-network-utilities-service-docker-install: Network Utilities Service docker install tag-select-all: Select All tag-deselect-all: Deselect All @@ -9502,10 +9382,9 @@ tools: tag-no-custom-resolvers-added-yet: No custom resolvers added yet. dns-query: title: Cloudflare DNS/RDAP Queries - description: >- - Query DNS records and RDAP for any domain name online using Cloudflare - DNS/RDAP.org. - externalAccess: 'null' + description: Query DNS records and RDAP for any domain name online using + Cloudflare DNS/RDAP.org. + externalAccess: "null" texts: message-please-enter-a-valid-domain-name: Please enter a valid domain name text-dns-records-copied-to-the-clipboard: DNS records copied to the clipboard @@ -9529,12 +9408,10 @@ tools: tag-dnssec: DNSSEC dns-tester: title: DNS Tester - description: >- - A simple tool for testing DNS resolution, whois queries, and other + description: A simple tool for testing DNS resolution, whois queries, and other DNS-related tasks. - externalAccess: >- - This tool calls your Self Host Network Utilities Service to perform - DNS/Whois queries and related tasks. + externalAccess: This tool calls your Self Host Network Utilities Service to + perform DNS/Whois queries and related tasks. texts: label-a-ipv4-address: A — IPv4 address label-aaaa-ipv6-address: AAAA — IPv6 address @@ -9621,17 +9498,17 @@ tools: label-gigadns-brazil-189-38-95-96: GigaDNS Brazil 189.38.95.96 label-opendns-africa-196-3-132-153: OpenDNS Africa 196.3.132.153 label-opendns-africa-196-3-132-154: OpenDNS Africa 196.3.132.154 - label-network-utilities-service-url: 'Network Utilities Service Url:' + label-network-utilities-service-url: "Network Utilities Service Url:" placeholder-http-localhost-3000: http://localhost:3000 - label-basic-authentication: 'Basic Authentication:' + label-basic-authentication: "Basic Authentication:" placeholder-username-password: username:password - label-target-dns-resolver-ip: 'Target DNS Resolver IP:' + label-target-dns-resolver-ip: "Target DNS Resolver IP:" placeholder-system-default: System default placeholder-e-g-10-0-0-53: e.g. 10.0.0.53 tab-dns-query: DNS Query label-domain: Domain placeholder-example-com: example.com - label-dns-record-type: 'DNS Record type:' + label-dns-record-type: "DNS Record type:" title-result: Result label-record-type: Record type title-answers: Answers @@ -9643,7 +9520,7 @@ tools: label-dnskey: DNSKEY label-rrsig: RRSIG tab-reverse-dns-ptr: Reverse DNS (PTR) - label-ip-address: 'IP Address:' + label-ip-address: "IP Address:" placeholder-8-8-8-8: 8.8.8.8 label-ip: IP label-ptr: PTR @@ -9652,7 +9529,7 @@ tools: label-axfr-allowed: AXFR allowed label-records: Records tag-network-utilities-service-configuration-self-hosted: Network Utilities Service Configuration (self hosted) - tag-you-must-self-host-network-utilities-service-see: 'You must self host Network Utilities Service. See:' + tag-you-must-self-host-network-utilities-service-see: "You must self host Network Utilities Service. See:" tag-network-utilities-service-docker-install: Network Utilities Service docker install tag-query-dns: Query DNS tag-lookup-whois: Lookup WHOIS @@ -9662,52 +9539,51 @@ tools: dockerfile-label-generator: title: Dockerfile Label Generator description: A simple tool for generating labels for Dockerfiles. - externalAccess: 'null' + externalAccess: "null" texts: - label-title: 'Title:' + label-title: "Title:" placeholder-my-project: My Project - label-description: 'Description:' + label-description: "Description:" placeholder-short-project-description: Short project description - label-repository-url: 'Repository URL:' + label-repository-url: "Repository URL:" placeholder-https-github-com-username-repo: https://github.com/username/repo - label-source-url: 'Source URL:' - label-documentation-url: 'Documentation URL:' + label-source-url: "Source URL:" + label-documentation-url: "Documentation URL:" placeholder-https-github-com-username-repo-readme: https://github.com/username/repo#readme - label-license-spdx: 'License (SPDX):' + label-license-spdx: "License (SPDX):" placeholder-mit: MIT - label-version: 'Version:' + label-version: "Version:" placeholder-1-0-0: 1.0.0 - label-revision-commit-sha: 'Revision (Commit SHA):' + label-revision-commit-sha: "Revision (Commit SHA):" placeholder-abcdef123456: abcdef123456 - label-created: 'Created:' - placeholder-2024-01-01t12-00-00z: '2024-01-01T12:00:00.000Z' - label-authors: 'Authors:' + label-created: "Created:" + placeholder-2024-01-01t12-00-00z: 2024-01-01T12:00:00.000Z + label-authors: "Authors:" placeholder-your-name-you-example-com: Your Name {'<'}you{'@'}example.com{'>'} title-generated-label-block: Generated LABEL block https-tester: title: HTTPS Tester description: Validate HTTPS certificate, HSTS and 302 redirection - externalAccess: >- - This tool calls your Self Host Network Utilities Service to perform - HTTPS/HSTS related tasks. + externalAccess: This tool calls your Self Host Network Utilities Service to + perform HTTPS/HSTS related tasks. texts: - label-network-utilities-service-url: 'Network Utilities Service Url:' + label-network-utilities-service-url: "Network Utilities Service Url:" placeholder-http-localhost-3000: http://localhost:3000 - label-basic-authentication: 'Basic Authentication:' + label-basic-authentication: "Basic Authentication:" placeholder-username-password: username:password tab-certificate: Certificate - label-host: 'Host:' + label-host: "Host:" placeholder-example-com: example.com - label-port: 'Port:' - placeholder-443: '443' + label-port: "Port:" + placeholder-443: "443" title-result: Result - label-hostname: 'Hostname:' - label-not-before: 'Not before:' - label-not-after: 'Not after:' - label-days-until-expiry: 'Days until expiry:' - label-subject: 'Subject:' - label-issuer: 'Issuer:' - label-sub-alt-name: 'Sub. Alt. Name:' + label-hostname: "Hostname:" + label-not-before: "Not before:" + label-not-after: "Not after:" + label-days-until-expiry: "Days until expiry:" + label-subject: "Subject:" + label-issuer: "Issuer:" + label-sub-alt-name: "Sub. Alt. Name:" tab-hsts: HSTS label-url: URL placeholder-https-example-com: https://example.com @@ -9717,7 +9593,7 @@ tools: label-preload: Preload label-raw-header: Raw header tab-http-https-redirect: HTTP → HTTPS Redirect - label-domain: 'Domain:' + label-domain: "Domain:" label-http-url: HTTP URL label-redirected: Redirected label-final-url: Final URL @@ -9725,7 +9601,7 @@ tools: label-redirect-chain: Redirect chain title-redirect-chain-details: Redirect chain details tag-network-utilities-service-configuration-self-hosted: Network Utilities Service Configuration (self hosted) - tag-you-must-self-host-network-utilities-service-see: 'You must self host Network Utilities Service. See:' + tag-you-must-self-host-network-utilities-service-see: "You must self host Network Utilities Service. See:" tag-network-utilities-service-docker-install: Network Utilities Service docker install tag-check-certificate: Check Certificate tag-check-hsts: Check HSTS @@ -9733,7 +9609,7 @@ tools: k6-script-generator: title: K6 Load Testing Script Generator description: Generate k6 load testing scripts with common presets - externalAccess: 'null' + externalAccess: "null" texts: label-smoke-test: Smoke Test label-load-test: Load Test @@ -9745,24 +9621,24 @@ tools: label-put: PUT label-patch: PATCH label-delete: DELETE - label-scenario-preset: 'Scenario Preset:' - label-virtual-users-vus: 'Virtual Users (VUs):' - label-duration: 'Duration:' - label-ramp-up-duration: 'Ramp Up Duration:' - label-ramp-down-duration: 'Ramp Down Duration:' - label-thresholds-name-expression: 'Thresholds (Name/Expression):' + label-scenario-preset: "Scenario Preset:" + label-virtual-users-vus: "Virtual Users (VUs):" + label-duration: "Duration:" + label-ramp-up-duration: "Ramp Up Duration:" + label-ramp-down-duration: "Ramp Down Duration:" + label-thresholds-name-expression: "Thresholds (Name/Expression):" placeholder-metric: Metric placeholder-rule: Rule - label-checks-name-expression: 'Checks (Name/Expression):' + label-checks-name-expression: "Checks (Name/Expression):" placeholder-check-name: Check name placeholder-expression: Expression - label-request-steps: 'Request Steps:' + label-request-steps: "Request Steps:" placeholder-request-url: Request URL - label-payload: 'Payload:' + label-payload: "Payload:" placeholder-payload-json-or-text: Payload (JSON or text) placeholder-headers-json: Headers (JSON) - label-headers: 'Headers:' - label-sleep-after-this-step-seconds: 'Sleep after this step (seconds):' + label-headers: "Headers:" + label-sleep-after-this-step-seconds: "Sleep after this step (seconds):" title-generated-k6-script: Generated K6 Script tag-apply-preset: Apply Preset tag-remove: Remove @@ -9773,7 +9649,7 @@ tools: markdown-diff: title: Markdown Diff description: Compare two Markdown documents and see the differences between them. - externalAccess: 'null' + externalAccess: "null" texts: label-code: Code label-preview: Preview @@ -9782,29 +9658,29 @@ tools: markdown-preview: title: Markdown preview description: Live preview of Markdown as you type - externalAccess: 'null' + externalAccess: "null" texts: placeholder-your-markdown-content: Your Markdown content... - label-your-markdown-to-preview: 'Your Markdown to preview:' - label-rendered-preview: 'Rendered preview:' + label-your-markdown-to-preview: "Your Markdown to preview:" + label-rendered-preview: "Rendered preview:" markdown-table-generator: title: Markdown Table Generator description: Create GitHub-flavored Markdown tables with a visual editor. - externalAccess: 'null' + externalAccess: "null" texts: label-left: Left label-center: Center label-right: Right - label-paste-clipboard-table-data-here: 'Paste clipboard table data here:' + label-paste-clipboard-table-data-here: "Paste clipboard table data here:" placeholder-paste-your-table-to-edit: Paste your table to edit... - label-generated-markdown-table: 'Generated Markdown table:' + label-generated-markdown-table: "Generated Markdown table:" tag-import-table-data: Import Table Data tag-add-row: Add row tag-add-column: Add column nmap-command-builder: title: Nmap Command Builder description: A simple command builder for generating Nmap scan commands. - externalAccess: 'null' + externalAccess: "null" texts: label-default-scan: Default Scan label-quick-scan: Quick Scan @@ -9825,10 +9701,10 @@ tools: label-ftp-audit: FTP Audit label-ssh-audit: SSH Audit label-full-recon-os-version-scripts: Full Recon (OS + Version + Scripts) - label-target: 'Target:' + label-target: "Target:" placeholder-example-com-or-192-168-1-1: example.com or 192.168.1.1 tab-presets: Presets - label-preset: 'Preset:' + label-preset: "Preset:" placeholder-choose-a-preset: Choose a preset tab-custom: Custom title-scan-options: Scan Options @@ -9849,16 +9725,15 @@ tools: title-generated-command: Generated Command picomatch-tester: title: Picomatch Tester - description: >- - A simple tester for the picomatch library, which is used for glob pattern - matching. - externalAccess: 'null' + description: A simple tester for the picomatch library, which is used for glob + pattern matching. + externalAccess: "null" texts: - label-pattern: 'Pattern:' + label-pattern: "Pattern:" placeholder-enter-a-glob-pattern-like-js: Enter a glob pattern like *.js - label-options: 'Options:' - label-generated-regex: 'Generated Regex:' - label-test-lines-one-per-line: 'Test Lines (one per line):' + label-options: "Options:" + label-generated-regex: "Generated Regex:" + label-test-lines-one-per-line: "Test Lines (one per line):" placeholder-enter-one-string-per-line: Enter one string per line tag-case-insensitive: Case insensitive tag-match-dotfiles: Match dotfiles @@ -9867,56 +9742,53 @@ tools: tag-don-t-match-trailing-slashes-with-single-stars: Don't match trailing slashes with single stars powershell-memo: title: Powershell Cheatsheet - description: >- - Powershell is a powerful scripting language and command-line shell + description: Powershell is a powerful scripting language and command-line shell designed for system administration and automation. It provides a wide range of cmdlets and features that allow users to manage and automate tasks on Windows systems efficiently. - externalAccess: 'null' + externalAccess: "null" running-pace-calculator: title: Running Pace Calculator - description: >- - Calculate your running pace, estimate your finish times for popular races, - break down splits, and find your training zones. - externalAccess: 'null' + description: Calculate your running pace, estimate your finish times for popular + races, break down splits, and find your training zones. + externalAccess: "null" texts: - label-length: 'Length:' + label-length: "Length:" placeholder-e-g-10km-or-100m: e.g. 10km or 100m - label-time: 'Time:' + label-time: "Time:" placeholder-e-g-45-00-or-45min-or-1h30m: e.g. 45:00 or 45min or 1h30m... - label-pace: 'Pace:' + label-pace: "Pace:" placeholder-e-g-4-30-km: e.g. 4:30/km - label-unit: 'Unit:' - label-output-speed-in-instead-of-pace: 'Output speed in instead of pace:' + label-unit: "Unit:" + label-output-speed-in-instead-of-pace: "Output speed in instead of pace:" title-result: Result tag-km: km tag-mile: mile tag-calculate: Calculate saml-parser: title: SAML Parser - description: >- - Detects SAML input (Base64, DEFLATE, or XML), parses, validates its + description: Detects SAML input (Base64, DEFLATE, or XML), parses, validates its signature, and displays a structured view of the assertion—including issuer, subject, conditions, authentication context, claims, and validation status. - externalAccess: 'null' + externalAccess: "null" texts: - label-saml-assertion-base64-deflate-or-xml: 'SAML assertion (Base64, DEFLATE, or XML):' + label-saml-assertion-base64-deflate-or-xml: "SAML assertion (Base64, DEFLATE, or XML):" placeholder-paste-saml-assertion-base64-deflate-or-xml: Paste SAML assertion (Base64, DEFLATE, or XML) title-validation-options: Validation Options - label-thumbprint: 'Thumbprint:' + label-thumbprint: "Thumbprint:" placeholder-thumbprint-optional: Thumbprint (optional) - label-public-key: 'Public Key:' + label-public-key: "Public Key:" placeholder-public-key-optional: Public key (optional) - label-audience: 'Audience:' + label-audience: "Audience:" placeholder-audience-optional: Audience (optional) title-parsed-saml-assertion: Parsed SAML Assertion - label-issuer: 'Issuer:' - label-assertion-id: 'Assertion Id:' - label-session-index: 'Session Index:' - label-notbefore: 'NotBefore:' - label-notonorafter: 'NotOnOrAfter:' - label-signature-validation-status: 'Signature Validation Status:' + label-issuer: "Issuer:" + label-assertion-id: "Assertion Id:" + label-session-index: "Session Index:" + label-notbefore: "NotBefore:" + label-notonorafter: "NotOnOrAfter:" + label-signature-validation-status: "Signature Validation Status:" title-claims: Claims title-raw-assertion: Raw Assertion tag-bypass-expiration: Bypass Expiration @@ -9925,7 +9797,7 @@ tools: url-builder: title: URL Builder description: Allows to edit and build URLs with query parameters - externalAccess: 'null' + externalAccess: "null" texts: label-string: string label-number: number @@ -9933,9 +9805,9 @@ tools: label-date: date label-datetime: datetime label-array: array - label-load-url: 'Load Url:' + label-load-url: "Load Url:" placeholder-paste-url-to-parse: Paste URL to parse - label-base-url: 'Base URL:' + label-base-url: "Base URL:" placeholder-base-url: Base URL title-url-parameters: Url Parameters placeholder-key: key @@ -9964,17 +9836,20 @@ tools: tag-copy-json-paths: Copy JSON paths tag-generate-patch: Generate patch tag-apply-patch: Apply patch + title: Json Patch Tester + description: A simple tool for creating and testing JSON patches according to + RFC 6902. And list paths of a JSON object. + externalAccess: "null" ping: title: Ping description: Ping a set of hostname, IPs, CIDR or IP range - externalAccess: >- - This tool calls your Self Host Network Utilities Service to perform ICMP - pings. + externalAccess: This tool calls your Self Host Network Utilities Service to + perform ICMP pings. texts: - label-targets-ips-cidrs-hostnames-one-per-line-or-or: 'Targets (IPs/CIDRs/Hostnames, one per line or , or ;):' + label-targets-ips-cidrs-hostnames-one-per-line-or-or: "Targets (IPs/CIDRs/Hostnames, one per line or , or ;):" placeholder-192-168-1-1-10-google-com-10-10-0-0-0-24: 192.168.1.1 google.com 10.0.0.0/24 - label-count: 'Count:' - label-timeout-seconds: 'Timeout (seconds):' + label-count: "Count:" + label-timeout-seconds: "Timeout (seconds):" tag-ping-all: Ping All tag-target: Target tag-ip: IP @@ -10005,14 +9880,12 @@ tools: tools: Tools restic-command-generator: title: Restic Command Generator - description: >- - Generate restic CLI commands to restore a Backrest or plain restic - repository: a whole snapshot, only some files, or a browsable mount. + description: "Generate restic CLI commands to restore a Backrest or plain restic + repository: a whole snapshot, only some files, or a browsable mount." texts: - intro: >- - Generator only: nothing runs here and nothing you type leaves your + intro: "Generator only: nothing runs here and nothing you type leaves your browser. Describe your repository, pick what you need to recover, and - copy the shell snippet. + copy the shell snippet." title-repository: Repository label-backend: Backend backend-s3: S3 compatible (Backblaze B2, MinIO, Wasabi, AWS…) @@ -10038,13 +9911,13 @@ tools: label-container: Container label-raw-repository: Repository URI label-repository-mode: Repository passed as - repository-flag: '-r flag on every command' + repository-flag: -r flag on every command repository-env: RESTIC_REPOSITORY environment variable label-repository-uri: Repository URI label-password: Repository password password-prompt: Prompt for it in the shell (read -rs, stays out of the history) - password-file: '--password-file' - password-command: '--password-command' + password-file: --password-file + password-command: --password-command password-placeholder: RESTIC_PASSWORD export with a placeholder password-none: Already set in my environment label-password-file: Password file @@ -10054,9 +9927,9 @@ tools: credentials-placeholder: Export them with placeholders credentials-none: Already set in my environment label-account-id: Key ID / account name - hint-secrets: >- - No secret is ever put in the generated command: the prompt options read - them into your shell with "read -rs" so they stay out of your history. + hint-secrets: 'No secret is ever put in the generated command: the prompt + options read them into your shell with "read -rs" so they stay out of + your history.' title-operation: What do you want to do? operation-restore: restore — write files from a snapshot back to disk operation-dump: dump — stream one file or folder out of a snapshot @@ -10078,8 +9951,7 @@ tools: placeholder-tag: manual label-filter-paths: Paths placeholder-path: /home/me/documents - hint-tags: >- - Backrest tags the snapshots it creates with "plan:" and "created-by:" + hint-tags: Backrest tags the snapshots it creates with "plan:" and "created-by:" followed by the plan and the instance IDs. Tags inside a single --tag are ANDed while repeated --tag flags are ORed, so the plan and the instance stay in one flag and each extra tag gets its own. @@ -10088,7 +9960,7 @@ tools: label-include: Restore only these paths or patterns placeholder-include: /home/me/documents/**/*.pdf label-exclude: Exclude these paths or patterns - placeholder-exclude: '**/node_modules' + placeholder-exclude: "**/node_modules" label-overwrite: Overwrite existing files overwrite-default: restic default (always) overwrite-always: always @@ -10107,9 +9979,9 @@ tools: archive-tar: tar archive-zip: zip label-output-file: Redirect to a local file (optional) - hint-dump: >- - dump streams a single file or folder straight out of the repository, so - you do not have to restore a whole snapshot to get one config file back. + hint-dump: dump streams a single file or folder straight out of the repository, + so you do not have to restore a whole snapshot to get one config file + back. title-mount-options: Mount options label-mount-point: Mount point label-allow-other: Allow other users to access the mount @@ -10146,34 +10018,29 @@ tools: label-extra-options: Backend options (-o) placeholder-extra-option: s3.connections=4 label-extra-arguments: Extra arguments (appended as-is) - label-no-lock: '--no-lock' - label-no-cache: '--no-cache' - label-insecure-tls: '--insecure-tls' - label-json: '--json' - label-quiet: '--quiet' - label-verbose: '--verbose' + label-no-lock: --no-lock + label-no-cache: --no-cache + label-insecure-tls: --insecure-tls + label-json: --json + label-quiet: --quiet + label-verbose: --verbose title-output: Generated command label-include-environment: Include the environment setup label-multiline: One argument per line button-reset: Reset to defaults - warning-history: >- - Placeholder exports stay in your shell history once filled in: prefer - the prompt options, or clear the history afterwards. - warning-target: >- - restore recreates the full path of every file under the target + warning-history: "Placeholder exports stay in your shell history once filled in: + prefer the prompt options, or clear the history afterwards." + warning-target: restore recreates the full path of every file under the target directory, so /etc/hosts ends up in the etc/hosts subfolder of the target. - warning-delete: >- - --delete removes the files of the target directory that are not in the - snapshot. Try it with --dry-run first. - warning-restic-version: '--dry-run, --delete and --overwrite require restic 0.17 or newer.' - warning-mount: >- - mount needs FUSE, exposes the snapshots read-only, and keeps running - until you stop it with Ctrl-C. + warning-delete: --delete removes the files of the target directory that are not + in the snapshot. Try it with --dry-run first. + warning-restic-version: --dry-run, --delete and --overwrite require restic 0.17 or newer. + warning-mount: mount needs FUSE, exposes the snapshots read-only, and keeps + running until you stop it with Ctrl-C. title-walkthrough: Recovery walkthrough - hint-walkthrough: >- - The usual sequence when the repository is all that is left, built from - the settings above. + hint-walkthrough: The usual sequence when the repository is all that is left, + built from the settings above. walkthrough-snapshots: List the snapshots of the repository walkthrough-find: Find which snapshot holds the file you need walkthrough-ls: List the files of the chosen snapshot @@ -10182,73 +10049,70 @@ tools: title-backrest: Backrest cheat sheet table-item: Item table-value: Default path or format (Docker image between parentheses) - backrest-config: >- - Config file, holding the repository URI, its password and the backend - environment variables + backrest-config: Config file, holding the repository URI, its password and the + backend environment variables backrest-data: Data directory backrest-binary: Restic binary downloaded by Backrest backrest-plan-tag: Tag identifying the plan backrest-instance-tag: Tag identifying the instance - hint-backrest: >- - A Backrest repository is a plain restic repository: if the web UI is - gone, read the URI and the password out of config.json and drive it with - the restic binary Backrest already downloaded. + hint-backrest: "A Backrest repository is a plain restic repository: if the web + UI is gone, read the URI and the password out of config.json and drive + it with the restic binary Backrest already downloaded." external-self-hosted-required: External Self Hosted Required epc-qrcode-generator: title: EPC QRCode Generator - description: >- - Generate an European Payments Council (EPC) QR Code for initiating a SEPA - credit transfer - externalAccess: 'null' + description: Generate an European Payments Council (EPC) QR Code for initiating + a SEPA credit transfer + externalAccess: "null" texts: text-copied-to-clipboard: Copied to clipboard label-v1: V1 label-v2: V2 - label-beneficiary-name: 'Beneficiary Name:' + label-beneficiary-name: "Beneficiary Name:" placeholder-beneficiary-name: Beneficiary name - label-account-iban: 'Account (IBAN):' + label-account-iban: "Account (IBAN):" placeholder-fr76: FR76... - label-bic: 'BIC:' + label-bic: "BIC:" placeholder-bank-bic-optional: Bank BIC (optional) - label-amount-eur: 'Amount (EUR):' - label-payment-reference: 'Payment Reference:' + label-amount-eur: "Amount (EUR):" + label-payment-reference: "Payment Reference:" placeholder-optional: Optional - label-purpose: 'Purpose:' - label-version: 'Version:' - label-foreground-color: 'Foreground color:' - label-background-color: 'Background color:' - label-qr-size: 'QR Size:' + label-purpose: "Purpose:" + label-version: "Version:" + label-foreground-color: "Foreground color:" + label-background-color: "Background color:" + label-qr-size: "QR Size:" tag-generate-qr: Generate QR tag-download-qrcode: Download QRCode tag-copy-qrcode-text: Copy QRCode text url-redirection-checker: title: URL Redirection Checker description: Check if a URL redirects to another URL. - externalAccess: 'null' + externalAccess: "null" texts: label-get: GET label-head: HEAD - label-url: 'URL:' + label-url: "URL:" placeholder-https-example-com: https://example.com - label-method: 'Method:' - label-user-agent: 'User Agent:' - label-max-hops: 'Max Hops:' + label-method: "Method:" + label-user-agent: "User Agent:" + label-max-hops: "Max Hops:" label-include-body-preview: Include Body Preview - label-preview-bytes: 'Preview Bytes:' + label-preview-bytes: "Preview Bytes:" title-warnings: Warnings title-summary: Summary - label-input-url: 'Input URL:' - label-final-url: 'Final URL:' - label-hop-count: 'Hop Count:' + label-input-url: "Input URL:" + label-final-url: "Final URL:" + label-hop-count: "Hop Count:" title-redirect-chain: Redirect Chain tag-inspect-redirect-chain: Inspect Redirect Chain - tag-: '-' + tag-: "-" tag-url: URL tag-status: Status tag-duration: Duration tag-redirect: Redirect tag-location: Location - tag-300-hop-status-code: '= 300 && hop.status_code' + tag-300-hop-status-code: = 300 && hop.status_code tag-headers-body-preview: Headers & Body Preview tag-truncated: Truncated fraction-decimal-converter: @@ -10256,22 +10120,21 @@ tools: label-fraction-decimal: Fraction → Decimal label-decimal-fraction: Decimal → Fraction label-inches: Inches - label-millimeters: 'Millimeters:' - label-mode: 'Mode:' - label-decimal-places: 'Decimal Places:' - label-unit: 'Unit:' - label-fraction-resolution: 'Fraction Resolution:' - label-decimal-value: 'Decimal Value:' - label-fraction: 'Fraction:' + label-millimeters: "Millimeters:" + label-mode: "Mode:" + label-decimal-places: "Decimal Places:" + label-unit: "Unit:" + label-fraction-resolution: "Fraction Resolution:" + label-decimal-value: "Decimal Value:" + label-fraction: "Fraction:" placeholder-e-g-3-16-or-2-3-16: e.g. 3/16 or 2 3/16 title-results: Results - label-decimal-inches: 'Decimal Inches:' + label-decimal-inches: "Decimal Inches:" tag-const-mode-ref: const mode = ref title: Fraction Decimal Converter - description: >- - Convert fractions to decimals and vice versa including inches and metric - conversions. - externalAccess: 'null' + description: Convert fractions to decimals and vice versa including inches and + metric conversions. + externalAccess: "null" sound-tester: texts: title-general: General @@ -10279,7 +10142,7 @@ tools: title-bass-tests: Bass Tests title-treble-tests: Treble Tests title-custom-frequency: Custom Frequency - label-frequency-hz: 'Frequency (Hz):' + label-frequency-hz: "Frequency (Hz):" tag-440hz-la: 440Hz / La tag-sweep: Sweep tag-white-noise: White Noise @@ -10289,10 +10152,9 @@ tools: tag-right: Right tag-play-this-frequency: Play this frequency title: Sound Tester - description: >- - Test your speakers and headphones by playing test sounds. Adjust volume - and check for audio clarity. - externalAccess: 'null' + description: Test your speakers and headphones by playing test sounds. Adjust + volume and check for audio clarity. + externalAccess: "null" paste-image: texts: copy-image: Copy image @@ -10300,12 +10162,12 @@ tools: getoutputextension-image: .{0} your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Your browser cannot encode {0}. The image downloads as {1}. formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) - output-gettypelabel-image-output-type-formatbytes-image-output-size: 'Output: {0}, {1}' - original-gettypelabel-image-source-type-formatbytes-image-source-size: 'Original: {0}, {1}' - image-width-image-height-px: '{0} × {1} px' + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Output: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Original: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" clear-all: Clear all - images-length-images-length-1-image-images-pasted-in-this-session: '{0} {1} pasted in this session' - quality: '{0}%' + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} pasted in this session" + quality: "{0}%" paste-from-clipboard: Paste from clipboard the-image-stays-in-your-browser-nothing-is-uploaded: The image stays in your browser. Nothing is uploaded. anywhere-on-this-page-to-paste-an-image: anywhere on this page to paste an image. @@ -10315,10 +10177,10 @@ tools: the-browser-could-not-copy-the-image-to-the-clipboard: The browser could not copy the image to the clipboard. image-copied-to-the-clipboard: Image copied to the clipboard the-browser-could-not-read-the-clipboard: The browser could not read the clipboard. - the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: >- + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: The browser blocked clipboard access. Allow it in the site settings, or press {0}. - your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: >- + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: Your browser cannot read images from the clipboard with a button. Press {0} instead. the-browser-could-not-read-the-pasted-image: The browser could not read the pasted image. @@ -10326,6 +10188,10 @@ tools: the-clipboard-has-no-image-copy-an-image-then-try-again: The clipboard has no image. Copy an image, then try again. ctrl-v: Ctrl + V v: ⌘ + V + title: Paste Image + description: Paste an image from your clipboard, convert it to PNG, JPEG, or + WebP, and download it. + externalAccess: "null" whitespace-cleaner: options: texts: @@ -10363,8 +10229,24 @@ tools: the-clipboard-api-is-unavailable: The Clipboard API is unavailable. copy-failed: Copy failed copied: Copied ✓ - stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: '{0} lines · {1} chars · −{2}%' - stats-value-inputlines-lines-stats-value-inputchars-chars: '{0} lines · {1} chars' + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} lines · {1} chars · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} lines · {1} chars" + title: Whitespace Cleaner + description: "Clean terminal and Claude Code output: strip line numbers, ANSI + codes, box drawing, bullet markers, diff markers, and extra whitespace." + externalAccess: "null" + cli-banner-generator: + title: CLI Banner Generator + description: Generate ASCII banners, Message of the Day (MOTD) for your CLI + applications, terminal or router. + externalAccess: "null" + texts: + label-border-char: "Border Char:" + placeholder-: "#" + label-width-min-20-max-200: "Width (Min 20 – Max 200):" + label-banner-text: "Banner Text:" + placeholder-enter-motd-banner-text-here: Enter MOTD banner text here... + title-generated-banner: Generated Banner analogSignalConverter: texts: title-input: Input @@ -10385,23 +10267,21 @@ analogSignalConverter: label-rounded-signal: Rounded (integer) status-below-range: The signal is below the range. status-above-range: The signal is above the range. - status-below-live-zero: >- - The signal is below the live zero, check for a broken wire or a faulty - sensor. + status-below-live-zero: The signal is below the live zero, check for a broken + wire or a faulty sensor. engineering-below-range: The value is below the engineering range, the signal will be out of range. engineering-above-range: The value is above the engineering range, the signal will be out of range. - loop-status-failure-low: >- - Low failure (≤ 3.6 mA, NAMUR NE 43): broken loop, unpowered or faulty - transmitter. - loop-status-uncertain-low: 'Between 3.6 and 3.8 mA: undefined zone, a failure is likely (NAMUR NE 43).' - loop-status-under-range: >- - Under-range (3.8 to 4 mA): the measurement is saturated at the bottom of - the range. - loop-status-over-range: >- - Over-range (20 to 20.5 mA): the measurement is saturated at the top of the - range. - loop-status-uncertain-high: 'Between 20.5 and 21 mA: undefined zone, a failure is likely (NAMUR NE 43).' - loop-status-failure-high: 'High failure (≥ 21 mA, NAMUR NE 43): faulty transmitter or short circuit.' + loop-status-failure-low: "Low failure (≤ 3.6 mA, NAMUR NE 43): broken loop, + unpowered or faulty transmitter." + loop-status-uncertain-low: "Between 3.6 and 3.8 mA: undefined zone, a failure is + likely (NAMUR NE 43)." + loop-status-under-range: "Under-range (3.8 to 4 mA): the measurement is + saturated at the bottom of the range." + loop-status-over-range: "Over-range (20 to 20.5 mA): the measurement is + saturated at the top of the range." + loop-status-uncertain-high: "Between 20.5 and 21 mA: undefined zone, a failure + is likely (NAMUR NE 43)." + loop-status-failure-high: "High failure (≥ 21 mA, NAMUR NE 43): faulty transmitter or short circuit." label-formula: Formula formula-value: value formula-signal: signal diff --git a/locales/es.yml b/locales/es.yml index 2fe9a4a7..21c650ee 100644 --- a/locales/es.yml +++ b/locales/es.yml @@ -181,6 +181,7 @@ tools: finance: Finanzas default: Por defecto toml: TOML + automation: Automatización json-sort-master: title: Maestro de clasificación JSON description: Ordena tu JSON por claves y valores. @@ -4368,6 +4369,7 @@ tools: label-permanent: Permanente title-generated-fw-command: "Comando fw generado:" tag-const-zone-ref: zona constante = ref + tooltip-remove: Eliminar de esta lista title: generador de línea de comandos de firewalld description: Generar líneas de comando de firewalld fortune-wheel: @@ -4387,6 +4389,11 @@ tools: Aún no hay opciones añadidas. ¡Añade algunas opciones para empezar a girar! tag-: ✕ + wheel-options-wheeloptions-length: Opciones de ruedas ({0}) + spinning: Hilado... + spin-to-win: ¡Gira la ruleta para ganar! + spin-the-wheel: ¡Gira la ruleta! + checkbox-remove-winner-after-spin: Eliminar al ganador después del giro fstab-generator: title: Generador FStab description: Generar línea /etc/fstab @@ -9419,6 +9426,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Probador de teclados + description: Prueba las teclas de tu teclado y comprueba que todas funcionen + correctamente. Recibe información visual al pulsar cada tecla y es + compatible con diferentes distribuciones de teclado. + externalAccess: nulo markdown-to-data: texts: label-paste-your-markdown-content: "Pega tu contenido Markdown:" @@ -10008,6 +10020,10 @@ tools: tag-copy-json-paths: Copiar rutas JSON tag-generate-patch: Generar parche tag-apply-patch: Aplicar parche + title: Probador de parches JSON + description: Una herramienta sencilla para crear y probar parches JSON según la + RFC 6902. Y listar las rutas de un objeto JSON. + externalAccess: nulo ping: title: Silbido description: Hacer ping a un conjunto de nombres de host, direcciones IP, CIDR o @@ -10346,6 +10362,134 @@ tools: description: Prueba tus altavoces y auriculares reproduciendo sonidos de prueba. Ajusta el volumen y comprueba la claridad del audio. externalAccess: nulo + current-loop-4-20ma-converter: + title: convertidor de 4-20 mA + description: Con el sistema de diagnóstico de bucle NAMUR NE 43, convierta una + corriente de 4-20 mA (o de 0-20 mA) en un valor de ingeniería y viceversa. + texts: + signal-label: Actual + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: convertidor de 0-10 V + description: Convierte un voltaje de 0-10 V, 2-10 V, 0-5 V, 1-5 V o ±10 V en un + valor de ingeniería y viceversa. + texts: + signal-label: Voltaje + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Calculadora de escala analógica + description: Escalar un valor analógico sin procesar de un PLC (Siemens 0-27648, + Schneider 0-10000, 12/15/16 bits...) a un valor de ingeniería y viceversa. + texts: + signal-label: Valor bruto + preset-siemens-unipolar: Siemens S7 unipolar (0 a 27648) + preset-siemens-bipolar: Siemens S7 bipolar (-27648 a 27648) + preset-schneider: Schneider M340/M580 (0 a 10000) + preset-12-bits: 12 bits (de 0 a 4095) + preset-15-bits: 15 bits (de 0 a 32767) + preset-16-bits: 16 bits (de 0 a 65535) + paste-image: + texts: + copy-image: Copiar imagen + copy-as-base64: Copiar como base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Tu navegador no puede codificar {0}. La imagen se descarga como {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Salida: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Original: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Borrar todo + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} pegado en esta sesión" + quality: "{0}%" + paste-from-clipboard: Pegar desde el portapapeles + the-image-stays-in-your-browser-nothing-is-uploaded: La imagen permanece en tu navegador. No se sube nada. + anywhere-on-this-page-to-paste-an-image: Puedes pegar una imagen en cualquier parte de esta página. + press: Prensa + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: El navegador no pudo copiar la URL de datos base64 al portapapeles. + base64-data-url-copied-to-the-clipboard: URL de datos Base64 copiada al portapapeles + the-browser-could-not-copy-the-image-to-the-clipboard: El navegador no pudo copiar la imagen al portapapeles. + image-copied-to-the-clipboard: Imagen copiada al portapapeles + the-browser-could-not-read-the-clipboard: El navegador no pudo leer el portapapeles. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + El navegador ha bloqueado el acceso al portapapeles. Permítalo en la + configuración del sitio o pulse {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Tu navegador no puede leer imágenes del portapapeles con un botón. Pulsa + {0} en su lugar. + the-browser-could-not-read-the-pasted-image: El navegador no pudo leer la imagen pegada. + the-browser-could-not-convert-the-image: El navegador no pudo convertir la imagen. + the-clipboard-has-no-image-copy-an-image-then-try-again: El portapapeles está vacío. Copie una imagen y vuelva a intentarlo. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Pegar imagen + description: Pega una imagen desde el portapapeles, conviértela a formato PNG, + JPEG o WebP y descárgala. + externalAccess: nulo + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Convertir CRLF → LF + lf-endings: Finales LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Recorta las líneas de la izquierda y vuelve a unir los párrafos para + Reddit, Discord y Slack. + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Unir párrafos con ajuste suave + smart-unwrap: Desempaquetado inteligente + strip-from-patches: Eliminar + - {'@'}{'@'} de los parches + diff-markers: Marcadores de diferencia + remove-common-leading-indent: Eliminar la sangría inicial común + indent: Sangrar + collapse-2-blank-lines-into-1: Contraiga 2 o más líneas en blanco en 1 + blank-lines: Líneas en blanco + remove-end-of-line-whitespace: Eliminar el espacio en blanco al final de la línea + trailing-space: Espacio de arrastre + strip-prefixes: Eliminar los prefijos ●, ○, ⏺ + bullet-markers: Marcadores de balas + remove-characters: Eliminar ─ │ └ ┐ caracteres + box-drawing: Dibujo de caja + strip-color-escape-sequences: Secuencias de escape de color de tira + ansi-codes: Códigos ANSI + strip-1-2-1-t-prefixes: Eliminar los prefijos 1│, 2│, 1\\t + line-numbers: Números de línea + texts: + cleaning-options: Opciones de limpieza + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: El resultado limpio aparecerá aquí. + paste-fragmented-claude-code-output-here: Pegue aquí la salida fragmentada del código Claude… + sample: Muestra + paste: Pasta + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Error al copiar. El + archivo de salida está seleccionado. Pulse Ctrl+C para copiarlo. + copied-to-the-clipboard: Copiado al portapapeles. + the-clipboard-api-is-unavailable: La API del portapapeles no está disponible. + copy-failed: Error al copiar + copied: Copiado ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} líneas · {1} caracteres · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} líneas · {1} caracteres" + title: Limpiador de espacios en blanco + description: "Salida limpia de la terminal y del código Claude: elimina los + números de línea, los códigos ANSI, el dibujo de recuadros, los marcadores + de viñetas, los marcadores de diferencias y los espacios en blanco + adicionales." + externalAccess: nulo + cli-banner-generator: + title: Generador de banners CLI + description: Genera banners ASCII, Mensaje del Día (MOTD) para tus aplicaciones + de línea de comandos, terminal o enrutador. + externalAccess: nulo + texts: + label-border-char: "Carácter de borde:" + placeholder-: "#" + label-width-min-20-max-200: "Ancho (Mín. 20 – Máx. 200):" + label-banner-text: "Texto del banner:" + placeholder-enter-motd-banner-text-here: Introduzca aquí el texto del banner del mensaje del día... + title-generated-banner: Banner generado spanCopyable: copy: Copiar al portapapeles copied: Copiado! @@ -10370,3 +10514,46 @@ collapsibleToolMenu: collapsing: Colapso... collapse-all-tools: Contraer todas las herramientas expand-all-tools: Expandir todas las herramientas +analogSignalConverter: + texts: + title-input: Aporte + title-parameters: Parámetros + title-output: Producción + swap-direction: Cambiar de dirección + status-ok: En rango + copy-output: Copia el valor de salida + title-reference-points: Puntos de referencia + label-signal-type: Tipo de señal + preset-custom: Costumbre + label-engineering-range: Ingeniería mín./máx. + label-engineering-unit: Unidad de ingeniería + placeholder-unit: Unidad + error-signal-range: La señal mínima debe ser inferior a la señal máxima. + error-engineering-range: El valor mínimo de ingeniería debe ser inferior al + valor máximo de ingeniería. + label-engineering-value: Valor de ingeniería + label-rounded-signal: Redondeado (entero) + status-below-range: La señal está por debajo del rango. + status-above-range: La señal está por encima del rango. + status-below-live-zero: La señal está por debajo del cero de la señal activa; + compruebe si hay un cable roto o un sensor defectuoso. + engineering-below-range: El valor está por debajo del rango de ingeniería, la + señal estará fuera de rango. + engineering-above-range: El valor está por encima del rango de ingeniería, la + señal estará fuera de rango. + loop-status-failure-low: "Fallo bajo (≤ 3,6 mA, NAMUR NE 43): bucle roto, + transmisor sin alimentación o defectuoso." + loop-status-uncertain-low: "Entre 3,6 y 3,8 mA: zona indefinida, es probable que + se produzca un fallo (NAMUR NE 43)." + loop-status-under-range: "Rango inferior (3,8 a 4 mA): la medición se satura en + el extremo inferior del rango." + loop-status-over-range: "Rango superior (de 20 a 20,5 mA): la medición se satura + en el límite superior del rango." + loop-status-uncertain-high: "Entre 20,5 y 21 mA: zona indefinida, es probable + que se produzca un fallo (NAMUR NE 43)." + loop-status-failure-high: "Fallo elevado (≥ 21 mA, NAMUR NE 43): transmisor + defectuoso o cortocircuito." + label-formula: Fórmula + formula-value: valor + formula-signal: señal + column-percent: Rango diff --git a/locales/fr.yml b/locales/fr.yml index b18834d4..56d3f4fc 100644 --- a/locales/fr.yml +++ b/locales/fr.yml @@ -180,17 +180,28 @@ tools: toml: TOML current-loop-4-20ma-converter: title: Convertisseur 4-20 mA - description: Convertir un courant 4-20 mA (ou 0-20 mA) en valeur physique et inversement, avec le diagnostic de boucle NAMUR NE 43. + description: Convertir un courant 4-20 mA (ou 0-20 mA) en valeur physique et + inversement, avec le diagnostic de boucle NAMUR NE 43. texts: signal-label: Courant + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA voltage-0-10v-converter: title: Convertisseur 0-10 V - description: Convertir une tension 0-10 V, 2-10 V, 0-5 V, 1-5 V ou ±10 V en valeur physique et inversement. + description: Convertir une tension 0-10 V, 2-10 V, 0-5 V, 1-5 V ou ±10 V en + valeur physique et inversement. texts: signal-label: Tension + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V analog-scaling-calculator: title: Mise à l'échelle analogique - description: Convertir une valeur brute d'entrée analogique d'automate (Siemens 0-27648, Schneider 0-10000, 12/15/16 bits...) en valeur physique et inversement. + description: Convertir une valeur brute d'entrée analogique d'automate (Siemens + 0-27648, Schneider 0-10000, 12/15/16 bits...) en valeur physique et + inversement. texts: signal-label: Valeur brute preset-siemens-unipolar: Siemens S7 unipolaire (0 à 27648) @@ -2140,6 +2151,7 @@ tools: label-no: Non placeholder-enter-the-service-port-protocol: Entrez le service / port / protocole title-generated-fw-command: "Commande FW générée :" + tooltip-remove: Retirer de cette liste title: générateur de ligne de commande firewalld description: Générer des lignes de commande firewalld floating-point-converter: @@ -2326,6 +2338,11 @@ tools: title-move-down: Descendre title-move-up: Monter title-remove: Retirer + wheel-options-wheeloptions-length: Options de roue ({0}) + spinning: Filage... + spin-to-win: Tournez pour gagner ! + spin-the-wheel: Faites tourner la roue ! + checkbox-remove-winner-after-spin: Retirer le gagnant après le tour title: Roue de fortune fstab-generator: texts: @@ -9630,6 +9647,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Testeur de clavier + description: Testez les touches de votre clavier et vérifiez leur bon + fonctionnement. Un retour visuel s'affiche pour chaque frappe, avec prise + en charge de différentes dispositions de clavier. + externalAccess: nul markdown-to-data: texts: label-paste-your-markdown-content: "Collez votre contenu Markdown :" @@ -10222,6 +10244,10 @@ tools: tag-copy-json-paths: Copier les chemins JSON tag-generate-patch: Générer un patch tag-apply-patch: Appliquer le patch + title: Testeur de correctifs JSON + description: Un outil simple pour créer et tester des correctifs JSON conformes + à la RFC 6902. Et lister les chemins d'un objet JSON. + externalAccess: nul ping: title: Ping description: Effectuer un ping sur un ensemble de noms d'hôtes, d'adresses IP, @@ -10559,6 +10585,106 @@ tools: description: Testez vos haut-parleurs et votre casque en diffusant des sons de test. Réglez le volume et vérifiez la clarté audio. externalAccess: nul + paste-image: + texts: + copy-image: Copier l'image + copy-as-base64: Copier au format base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + Votre navigateur ne peut pas encoder {0}. L'image est téléchargée sous + la forme {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Résultat : {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Original : {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Effacer tout + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} collé dans cette session" + quality: "{0}%" + paste-from-clipboard: Coller depuis le presse-papiers + the-image-stays-in-your-browser-nothing-is-uploaded: L'image reste dans votre navigateur. Rien n'est téléchargé. + anywhere-on-this-page-to-paste-an-image: Vous pouvez coller une image n'importe où sur cette page. + press: Presse + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + Le navigateur n'a pas pu copier l'URL des données base64 dans le + presse-papiers. + base64-data-url-copied-to-the-clipboard: URL des données Base64 copiée dans le presse-papiers + the-browser-could-not-copy-the-image-to-the-clipboard: Le navigateur n'a pas pu copier l'image dans le presse-papiers. + image-copied-to-the-clipboard: Image copiée dans le presse-papiers + the-browser-could-not-read-the-clipboard: Le navigateur n'a pas pu lire le presse-papiers. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Le navigateur a bloqué l'accès au presse-papiers. Autorisez-le dans les + paramètres du site ou appuyez sur {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Votre navigateur ne peut pas lire les images du presse-papiers avec un + bouton. Appuyez plutôt sur {0}. + the-browser-could-not-read-the-pasted-image: Le navigateur n'a pas pu lire l'image collée. + the-browser-could-not-convert-the-image: Le navigateur n'a pas pu convertir l'image. + the-clipboard-has-no-image-copy-an-image-then-try-again: Le presse-papiers est vide. Copiez une image, puis réessayez. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Coller l'image + description: Collez une image depuis votre presse-papiers, convertissez-la au + format PNG, JPEG ou WebP, puis téléchargez-la. + externalAccess: nul + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Convertir CRLF → LF + lf-endings: terminaisons LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Couper les lignes à gauche et fusionner les paragraphes pour Reddit, + Discord et Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Joindre les paragraphes à retour souple + smart-unwrap: Déballage intelligent + strip-from-patches: Supprimer + - {'@'}{'@'} des patchs + diff-markers: Marqueurs différentiels + remove-common-leading-indent: Supprimer le retrait commun + indent: Retrait + collapse-2-blank-lines-into-1: Réduire 2 lignes vides ou plus en 1 + blank-lines: lignes vides + remove-end-of-line-whitespace: Supprimer les espaces de fin de ligne + trailing-space: Espace de traînée + strip-prefixes: Supprimer les préfixes ●, ○, ⏺ + bullet-markers: Marqueurs de balles + remove-characters: Supprimer les caractères ─ │ └ ┐ + box-drawing: Dessin en boîte + strip-color-escape-sequences: Séquences d'échappement de couleur de bande + ansi-codes: codes ANSI + strip-1-2-1-t-prefixes: Supprimer les préfixes 1│, 2│, 1\\t + line-numbers: Numéros de ligne + texts: + cleaning-options: options de nettoyage + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Votre fichier de sortie nettoyé apparaîtra ici. + paste-fragmented-claude-code-output-here: Collez ici le résultat fragmenté du code Claude… + sample: Échantillon + paste: Coller + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: La copie a échoué. + Le fichier de sortie est sélectionné. Appuyez sur Ctrl+C pour le copier. + copied-to-the-clipboard: Copié dans le presse-papiers. + the-clipboard-api-is-unavailable: L'API Presse-papiers n'est pas disponible. + copy-failed: Échec de la copie + copied: Copié ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} lignes · {1} caractères · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} lignes · {1} caractères" + title: Nettoyeur d'espaces blancs + description: "Sortie propre du terminal et du code Claude : numéros de ligne, + codes ANSI, dessin de boîte, marqueurs à puce, marqueurs de différence et + espaces blancs supplémentaires." + externalAccess: nul + cli-banner-generator: + title: Générateur de bannières CLI + description: Générez des bannières ASCII, Message du jour (MOTD) pour vos + applications CLI, terminal ou routeur. + externalAccess: nul + texts: + label-border-char: "Caractère de bordure :" + placeholder-: "#" + label-width-min-20-max-200: "Largeur (Min 20 – Max 200) :" + label-banner-text: "Texte de la bannière :" + placeholder-enter-motd-banner-text-here: Saisissez ici le texte de la bannière du message du jour... + title-generated-banner: Bannière générée favoriteButton: add: Ajouter aux favoris remove: Retirer des favoris @@ -10600,15 +10726,18 @@ analogSignalConverter: label-rounded-signal: Arrondi (entier) status-below-range: Le signal est sous la plage. status-above-range: Le signal est au-dessus de la plage. - status-below-live-zero: Le signal est sous le zéro décalé, vérifier une rupture de fil ou un capteur en défaut. + status-below-live-zero: Le signal est sous le zéro décalé, vérifier une rupture + de fil ou un capteur en défaut. engineering-below-range: La valeur est sous la plage physique, le signal sera hors plage. engineering-above-range: La valeur est au-dessus de la plage physique, le signal sera hors plage. - loop-status-failure-low: "Défaut bas (≤ 3,6 mA, NAMUR NE 43) : boucle coupée, transmetteur non alimenté ou en défaut." + loop-status-failure-low: "Défaut bas (≤ 3,6 mA, NAMUR NE 43) : boucle coupée, + transmetteur non alimenté ou en défaut." loop-status-uncertain-low: "Entre 3,6 et 3,8 mA : zone indéterminée, défaut probable (NAMUR NE 43)." loop-status-under-range: "Sous-échelle (3,8 à 4 mA) : mesure saturée en bas de plage." loop-status-over-range: "Sur-échelle (20 à 20,5 mA) : mesure saturée en haut de plage." loop-status-uncertain-high: "Entre 20,5 et 21 mA : zone indéterminée, défaut probable (NAMUR NE 43)." - loop-status-failure-high: "Défaut haut (≥ 21 mA, NAMUR NE 43) : transmetteur en défaut ou court-circuit." + loop-status-failure-high: "Défaut haut (≥ 21 mA, NAMUR NE 43) : transmetteur en + défaut ou court-circuit." label-formula: Formule formula-value: valeur formula-signal: signal diff --git a/locales/ga.yml b/locales/ga.yml index 541435be..9d745fce 100644 --- a/locales/ga.yml +++ b/locales/ga.yml @@ -200,6 +200,7 @@ tools: finance: Airgeadas default: Réamhshocrú toml: TOML + automation: Uathoibriú password-strength-analyser: title: Anailíseoir neart pasfhocal description: Faigh amach cé chomh láidir is atá do phasfhocal leis @@ -5605,6 +5606,7 @@ tools: label-permanent: Buan title-generated-fw-command: "Ordú fw ginte:" tag-const-zone-ref: crios const = tag + tooltip-remove: Bain den liosta seo title: gineadóir líne ordaithe firewalld description: Gin línte ordaithe firewalld fortune-wheel: @@ -5624,6 +5626,11 @@ tools: Níl aon roghanna curtha leis fós. Cuir roinnt roghanna leis chun tús a chur le sníomh! tag-: ✕ + wheel-options-wheeloptions-length: Roghanna Roth ({0}) + spinning: Ag sníomh... + spin-to-win: Casadh le Buachan! + spin-the-wheel: Cas an Roth! + checkbox-remove-winner-after-spin: Bain an buaiteoir tar éis casadh fstab-generator: title: Gineadóir FStab description: Gin líne /etc/fstab @@ -9369,6 +9376,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Tástálaí Méarchláir + description: Déan tástáil ar eochracha do mhéarchláir agus seiceáil an bhfuil na + heochracha go léir ag obair i gceart. Aiseolas amhairc le haghaidh gach + brú eochrach le tacaíocht do leagan amach méarchláir éagsúla. + externalAccess: nialas markdown-to-data: texts: label-paste-your-markdown-content: "Greamaigh d’ábhar marcála síos:" @@ -9959,6 +9971,10 @@ tools: tag-copy-json-paths: Cóipeáil cosáin JSON tag-generate-patch: Gin paiste tag-apply-patch: Cuir paiste i bhfeidhm + title: Tástálaí Paiste Json + description: Uirlis shimplí chun paistí JSON a chruthú agus a thástáil de réir + RFC 6902. Agus liostaigh cosáin réada JSON. + externalAccess: nialas ping: title: Ping description: Ping sraith d'ainmneacha óstacha, IPanna, CIDR nó raon IP @@ -10297,6 +10313,137 @@ tools: tástála a sheinm. Coigeartaigh an toirt agus seiceáil soiléireacht an fhuaime. externalAccess: nialas + current-loop-4-20ma-converter: + title: Tiontaire 4-20 mA + description: Tiontaigh sruth 4-20 mA (nó 0-20 mA) go luach innealtóireachta agus + ar ais, le diagnóisic lúb NAMUR NE 43. + texts: + signal-label: Reatha + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: Tiontaire 0-10 V + description: Tiontaigh voltas 0-10 V, 2-10 V, 0-5 V, 1-5 V nó ±10 V go luach + innealtóireachta agus ar ais. + texts: + signal-label: Voltas + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Áireamhán scálaithe analógach + description: Scálaigh luach analógach amh PLC (Siemens 0-27648, Schneider + 0-10000, 12/15/16 giotán...) isteach i luach innealtóireachta agus ar ais. + texts: + signal-label: Luach amh + preset-siemens-unipolar: Siemens S7 aonpholach (0 go 27648) + preset-siemens-bipolar: Siemens S7 dépholach (-27648 go 27648) + preset-schneider: Schneider M340/M580 (0 go 10000) + preset-12-bits: 12 giotán (0 go 4095) + preset-15-bits: 15 giotán (0 go 32767) + preset-16-bits: 16 giotán (0 go 65535) + paste-image: + texts: + copy-image: Cóipeáil íomhá + copy-as-base64: Cóipeáil mar base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Ní féidir le do bhrabhsálaí {0} a ionchódú. Íoslódálann an íomhá mar {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Aschur: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Bunleagan: {0}, {1}" + image-width-image-height-px: "{0} × {1} picteilín" + clear-all: Glan gach rud + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} greamaithe sa seisiún seo" + quality: "{0}%" + paste-from-clipboard: Greamaigh ón ghearrthaisce + the-image-stays-in-your-browser-nothing-is-uploaded: Fanann an íomhá i do bhrabhsálaí. Ní uaslódálfar aon rud. + anywhere-on-this-page-to-paste-an-image: áit ar bith ar an leathanach seo chun íomhá a ghreamú. + press: Brúigh + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + Níorbh fhéidir leis an mbrabhsálaí an URL sonraí base64 a chóipeáil + chuig an ngearrthaisce. + base64-data-url-copied-to-the-clipboard: URL sonraí Base64 cóipeáilte chuig an ghearrthaisce + the-browser-could-not-copy-the-image-to-the-clipboard: Ní raibh an brabhsálaí in + ann an íomhá a chóipeáil chuig an ghearrthaisce. + image-copied-to-the-clipboard: Íomhá cóipeáilte chuig an ghearrthaisce + the-browser-could-not-read-the-clipboard: Ní raibh an brabhsálaí in ann an ghearrthaisce a léamh. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Chuir an brabhsálaí bac ar rochtain ar an ngearrthaisce. Ceadaigh é i + socruithe an tsuímh, nó brúigh {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Ní féidir le do bhrabhsálaí íomhánna a léamh ón ngearrthaisce le cnaipe. + Brúigh {0} ina ionad sin. + the-browser-could-not-read-the-pasted-image: Ní raibh an brabhsálaí in ann an íomhá greamaithe a léamh. + the-browser-could-not-convert-the-image: Ní raibh an brabhsálaí in ann an íomhá a thiontú. + the-clipboard-has-no-image-copy-an-image-then-try-again: Níl aon íomhá ar an + ngearrthaisce. Cóipeáil íomhá, agus déan iarracht arís. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Greamaigh Íomhá + description: Greamaigh íomhá ó do ghearrthaisce, tiontaigh í go PNG, JPEG, nó + WebP, agus íoslódáil í. + externalAccess: nialas + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Tiontaigh CRLF → LF + lf-endings: Deireadh LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Línte a ghearrtar ar chlé agus míreanna a athcheangal le haghaidh + Reddit, Discord, Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Ceangail míreanna bog-fhillte + smart-unwrap: Díphacáil chliste + strip-from-patches: Stríoc + - {'@'}{'@'} ó phaistí + diff-markers: Marcóirí difríochta + remove-common-leading-indent: Bain an t-eangach tosaigh choiteann + indent: Líon isteach + collapse-2-blank-lines-into-1: Laghdaigh 2+ líne bhána go 1 + blank-lines: Línte bána + remove-end-of-line-whitespace: Bain spás bán deireadh líne + trailing-space: Spás leantach + strip-prefixes: Réimíreanna stiallta ●, ○, ⏺ + bullet-markers: Marcóirí urchair + remove-characters: Bain ─ │ └ ┐ carachtair + box-drawing: Líníocht bosca + strip-color-escape-sequences: Seichimh éalaithe datha stiallta + ansi-codes: Cóid ANSI + strip-1-2-1-t-prefixes: Réimíreanna stiallta 1│, 2│, 1\\t + line-numbers: Uimhreacha líne + texts: + cleaning-options: Roghanna glantacháin + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Beidh d’aschur glanta le feiceáil anseo. + paste-fragmented-claude-code-output-here: Greamaigh aschur Claude Code ilroinnte anseo… + sample: Sampla + paste: Greamaigh + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Theip ar an + gcóipeáil. Tá an t-aschur roghnaithe. Brúigh Ctrl+C chun é a chóipeáil. + copied-to-the-clipboard: Cóipeáilte chuig an ghearrthaisce. + the-clipboard-api-is-unavailable: Níl an API Gearrthaisce ar fáil. + copy-failed: Theip ar chóipeáil + copied: Cóipeáilte ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} líne · {1} carachtar · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} líne · {1} carachtar" + title: Glantóir Spáis Bhán + description: "Aschur glan críochfoirt agus Claude Code: uimhreacha líne stiall, + cóid ANSI, líníocht bosca, marcóirí piléar, marcóirí difríochta, agus spás + bán breise." + externalAccess: nialas + cli-banner-generator: + title: Gineadóir Meirge CLI + description: Gin meirgí ASCII, Teachtaireacht an Lae (MOTD) do d'fheidhmchláir + CLI, críochfort nó ródaire. + externalAccess: nialas + texts: + label-border-char: "Carachtar Teorann:" + placeholder-: "#" + label-width-min-20-max-200: "Leithead (Íosmhéid 20 – Uasmhéid 200):" + label-banner-text: "Téacs Meirge:" + placeholder-enter-motd-banner-text-here: Cuir isteach téacs meirge MOTD anseo... + title-generated-banner: Meirge Ginte locale-selector: select-a-language: Roghnaigh teanga collapsibleToolMenu: @@ -10305,3 +10452,43 @@ collapsibleToolMenu: collapsing: Ag titim as a chéile... collapse-all-tools: Laghdaigh Gach Uirlis expand-all-tools: Leathnaigh Gach Uirlis +analogSignalConverter: + texts: + title-input: Ionchur + title-parameters: Paraiméadair + title-output: Aschur + swap-direction: Malartaigh treo + status-ok: Laistigh den raon + copy-output: Cóipeáil an luach aschuir + title-reference-points: Pointí tagartha + label-signal-type: Cineál comhartha + preset-custom: Saincheaptha + label-engineering-range: Íosmhéid/uasmhéid innealtóireachta + label-engineering-unit: Aonad innealtóireachta + placeholder-unit: Aonad + error-signal-range: Caithfidh an comhartha íosta a bheith níos ísle ná an comhartha uasta. + error-engineering-range: Caithfidh an t-íosmhéid innealtóireachta a bheith níos + ísle ná an t-uasmhéid innealtóireachta. + label-engineering-value: Luach innealtóireachta + label-rounded-signal: Slánuimhir (slánuimhir) + status-below-range: Tá an comhartha faoi bhun an raoin. + status-above-range: Tá an comhartha os cionn an raoin. + status-below-live-zero: Tá an comhartha faoi bhun an náid bheo, seiceáil le + haghaidh sreang briste nó braiteoir lochtach. + engineering-below-range: Má tá an luach faoi bhun an raoin innealtóireachta, + beidh an comhartha lasmuigh den raon. + engineering-above-range: Má tá an luach os cionn an raoin innealtóireachta, + beidh an comhartha lasmuigh den raon. + loop-status-failure-low: "Teip íseal (≤ 3.6 mA, NAMUR NE 43): lúb briste, + tarchuradóir gan chumhacht nó lochtach." + loop-status-uncertain-low: "Idir 3.6 agus 3.8 mA: crios neamhshainithe, is dócha + go dtarlóidh teip (NAMUR NE 43)." + loop-status-under-range: "Faoi bhun an raoin (3.8 go 4 mA): tá an tomhas sáithithe ag bun an raoin." + loop-status-over-range: "Thar-raon (20 go 20.5 mA): tá an tomhas sáithithe ag barr an raoin." + loop-status-uncertain-high: "Idir 20.5 agus 21 mA: crios neamhshainithe, is + dócha go dtarlóidh teip (NAMUR NE 43)." + loop-status-failure-high: "Teip ard (≥ 21 mA, NAMUR NE 43): tarchuradóir lochtach nó ciorcad gearr." + label-formula: Foirmle + formula-value: luach + formula-signal: comhartha + column-percent: Raon diff --git a/locales/hi.yml b/locales/hi.yml index 2f117aa6..91d4b132 100644 --- a/locales/hi.yml +++ b/locales/hi.yml @@ -4377,6 +4377,7 @@ tools: label-permanent: स्थायी title-generated-fw-command: "जनरेट किया गया fw कमांड:" tag-const-zone-ref: स्थिर क्षेत्र = संदर्भ + tooltip-remove: इस सूची से हटा fortune-wheel: title: भाग्य का पहिया description: एक विन्यास योग्य भाग्य चक्र @@ -4394,6 +4395,11 @@ tools: अभी तक कोई विकल्प नहीं जोड़ा गया है। स्पिन शुरू करने के लिए कुछ विकल्प जोड़ें! tag-: ✕ + wheel-options-wheeloptions-length: व्हील विकल्प ({0}) + spinning: घूमना... + spin-to-win: स्पिन करके जीतें! + spin-the-wheel: पहिया घुमाएं! + checkbox-remove-winner-after-spin: स्पिन के बाद विजेता को हटा दें fstab-generator: title: एफस्टैब जनरेटर description: /etc/fstab लाइन जनरेट करें @@ -5074,6 +5080,11 @@ tools: label-azerty: अज़ेर्टी label-dvorak: ड्वोरक label-colemak: कोलमैक + title: कीबोर्ड परीक्षक + description: अपने कीबोर्ड की कुंजियों का परीक्षण करें और जांचें कि सभी कुंजियाँ + ठीक से काम कर रही हैं या नहीं। प्रत्येक कुंजी दबाने पर दृश्य प्रतिक्रिया + मिलती है और विभिन्न कीबोर्ड लेआउट के लिए भी समर्थन उपलब्ध है। + externalAccess: व्यर्थ text-to-binary: title: टेक्स्ट को UTF-8 बाइनरी में रूपांतरित करें description: टेक्स्ट को उसके UTF-8 बाइनरी रूप में और इसके विपरीत रूप में परिवर्तित करें। @@ -5289,6 +5300,7 @@ tools: finance: वित्त default: गलती करना toml: टॉमल + automation: स्वचालन websocket-tester: title: वेबसॉकेट परीक्षण description: वेबसॉकेट कनेक्शनों का परीक्षण करने की अनुमति देता है @@ -9936,6 +9948,11 @@ tools: tag-copy-json-paths: JSON पथों को कॉपी करें tag-generate-patch: पैच जनरेट करें tag-apply-patch: पैच लगाएं + title: JSON पैच परीक्षक + description: RFC 6902 के अनुसार JSON पैच बनाने और उनका परीक्षण करने के लिए एक + सरल उपकरण। साथ ही, JSON ऑब्जेक्ट के पथों को सूचीबद्ध करने की सुविधा भी + उपलब्ध है। + externalAccess: व्यर्थ ping: title: गुनगुनाहट description: होस्टनाम, आईपी पते, सीआईडीआर या आईपी रेंज के एक सेट को पिंग करें @@ -10271,9 +10288,172 @@ tools: description: टेस्ट साउंड चलाकर अपने स्पीकर और हेडफ़ोन की जांच करें। वॉल्यूम एडजस्ट करें और ऑडियो की स्पष्टता जांचें। externalAccess: व्यर्थ + current-loop-4-20ma-converter: + title: 4-20 mA कनवर्टर + description: NAMUR NE 43 लूप डायग्नोस्टिक का उपयोग करके 4-20 mA (या 0-20 mA) + करंट को इंजीनियरिंग मान में और वापस परिवर्तित करें। + texts: + signal-label: मौजूदा + label-4-20-ma: 4-20 एमए + label-0-20-ma: 0-20 एमए + voltage-0-10v-converter: + title: 0-10 वोल्ट कनवर्टर + description: 0-10 V, 2-10 V, 0-5 V, 1-5 V या ±10 V वोल्टेज को इंजीनियरिंग मान + में परिवर्तित करें और वापस परिवर्तित करें। + texts: + signal-label: वोल्टेज + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: एनालॉग स्केलिंग कैलकुलेटर + description: एक कच्चे पीएलसी एनालॉग मान (सीमेंस 0-27648, श्नाइडर 0-10000, + 12/15/16 बिट्स...) को इंजीनियरिंग मान में स्केल करें और वापस स्केल करें। + texts: + signal-label: अपरिष्कृत मान + preset-siemens-unipolar: सीमेंस एस7 यूनिपोलर (0 से 27648) + preset-siemens-bipolar: सीमेंस एस7 बाइपोलर (-27648 से 27648) + preset-schneider: श्नाइडर एम340/एम580 (0 से 10000) + preset-12-bits: 12 बिट (0 से 4095) + preset-15-bits: 15 बिट (0 से 32767) + preset-16-bits: 16 बिट (0 से 65535) + paste-image: + texts: + copy-image: नकल छवि + copy-as-base64: बेस64 के रूप में कॉपी करें + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + आपका ब्राउज़र {0} को एन्कोड नहीं कर सकता। छवि {1} के रूप में डाउनलोड + होती है। + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "आउटपुट: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "मूल: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: सभी साफ करें + images-length-images-length-1-image-images-pasted-in-this-session: इस सत्र में {0} {1} चिपकाया गया + quality: "{0}%" + paste-from-clipboard: क्लिपबोर्ड से पेस्ट करें + the-image-stays-in-your-browser-nothing-is-uploaded: यह छवि आपके ब्राउज़र में ही रहेगी। कुछ भी अपलोड नहीं होगा। + anywhere-on-this-page-to-paste-an-image: इस पेज पर कहीं भी इमेज पेस्ट करें। + press: प्रेस + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: ब्राउज़र बेस64 डेटा यूआरएल को क्लिपबोर्ड पर कॉपी नहीं कर सका। + base64-data-url-copied-to-the-clipboard: बेस64 डेटा यूआरएल क्लिपबोर्ड पर कॉपी हो गया + the-browser-could-not-copy-the-image-to-the-clipboard: ब्राउज़र छवि को क्लिपबोर्ड पर कॉपी नहीं कर सका। + image-copied-to-the-clipboard: छवि क्लिपबोर्ड पर कॉपी हो गई है + the-browser-could-not-read-the-clipboard: ब्राउज़र क्लिपबोर्ड को पढ़ नहीं सका। + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + ब्राउज़र ने क्लिपबोर्ड एक्सेस को ब्लॉक कर दिया है। कृपया साइट सेटिंग्स + में इसकी अनुमति दें, या {0} दबाएँ। + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + आपका ब्राउज़र बटन के माध्यम से क्लिपबोर्ड से छवियां नहीं पढ़ सकता है। + कृपया इसके बजाय {0} दबाएं। + the-browser-could-not-read-the-pasted-image: ब्राउज़र पेस्ट की गई छवि को पढ़ नहीं सका। + the-browser-could-not-convert-the-image: ब्राउज़र छवि को रूपांतरित नहीं कर सका। + the-clipboard-has-no-image-copy-an-image-then-try-again: क्लिपबोर्ड में कोई छवि नहीं है। एक छवि कॉपी करें, फिर पुनः प्रयास करें। + ctrl-v: Ctrl + V + v: ⌘ + V + title: छवि चिपकाएँ + description: अपने क्लिपबोर्ड से एक इमेज पेस्ट करें, उसे PNG, JPEG या WebP में + बदलें और डाउनलोड करें। + externalAccess: व्यर्थ + whitespace-cleaner: + options: + texts: + convert-crlf-lf: CRLF को LF में परिवर्तित करें + lf-endings: एलएफ अंत + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Reddit, Discord और Slack के लिए लाइनों को बाईं ओर से ट्रिम करें और + पैराग्राफ को फिर से जोड़ें। + markdown-reddit: मार्कडाउन / रेडिट + join-soft-wrapped-paragraphs: नरम आवरण वाले पैराग्राफों को जोड़ें + smart-unwrap: स्मार्ट अनरैप + strip-from-patches: पैच से + - {'@'}{'@'} हटाएँ + diff-markers: अंतर मार्कर + remove-common-leading-indent: सामान्य अग्रणी इंडेंट हटाएँ + indent: मांगपत्र + collapse-2-blank-lines-into-1: 2 या अधिक खाली पंक्तियों को 1 में समेटें + blank-lines: रिक्त रेखाएँ + remove-end-of-line-whitespace: पंक्ति के अंत में मौजूद रिक्त स्थान हटाएँ + trailing-space: अनुगामी स्थान + strip-prefixes: ●, ○, ⏺ उपसर्गों को हटाएँ + bullet-markers: बुलेट मार्कर + remove-characters: ─ │ └ ┐ वर्णों को हटाएँ + box-drawing: बॉक्स ड्राइंग + strip-color-escape-sequences: स्ट्रिप रंग एस्केप अनुक्रम + ansi-codes: एएनएसआई कोड + strip-1-2-1-t-prefixes: स्ट्रिप 1│, 2│, 1\\t उपसर्ग + line-numbers: पंक्ति संख्याएँ + texts: + cleaning-options: सफाई के विकल्प + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: आपका साफ किया हुआ आउटपुट यहां दिखाई देगा। + paste-fragmented-claude-code-output-here: खंडित क्लाउड कोड आउटपुट को यहाँ पेस्ट करें… + sample: नमूना + paste: पेस्ट करें + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: कॉपी करने में विफल। आउटपुट चयनित है। इसे कॉपी करने के लिए Ctrl+C दबाएँ। + copied-to-the-clipboard: क्लिपबोर्ड पर कॉपी हो गई। + the-clipboard-api-is-unavailable: क्लिपबोर्ड एपीआई अनुपलब्ध है। + copy-failed: कॉपी विफल + copied: प्रतिलिपि बनाई गई ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} पंक्तियाँ · {1} अक्षर · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} पंक्तियाँ · {1} अक्षर" + title: व्हाइटस्पेस क्लीनर + description: "टर्मिनल और क्लाउड कोड आउटपुट को साफ करें: लाइन नंबर, एएनएसआई कोड, + बॉक्स ड्राइंग, बुलेट मार्कर, डिफ मार्कर और अतिरिक्त व्हाइटस्पेस हटा दें।" + externalAccess: व्यर्थ + cli-banner-generator: + title: सीएलआई बैनर जनरेटर + description: अपने CLI एप्लिकेशन, टर्मिनल या राउटर के लिए ASCII बैनर और मैसेज ऑफ + द डे (MOTD) जेनरेट करें। + externalAccess: व्यर्थ + texts: + label-border-char: "सीमा वर्ण:" + placeholder-: "#" + label-width-min-20-max-200: "चौड़ाई (न्यूनतम 20 – अधिकतम 200):" + label-banner-text: "बैनर टेक्स्ट:" + placeholder-enter-motd-banner-text-here: यहां MOTD बैनर का टेक्स्ट डालें... + title-generated-banner: जनरेट किया गया बैनर collapsibleToolMenu: text: expanding: विस्तार हो रहा है... collapsing: ढह रहा है... collapse-all-tools: सभी टूल को छोटा करें expand-all-tools: सभी टूल खोलें +analogSignalConverter: + texts: + title-input: इनपुट + title-parameters: पैरामीटर + title-output: उत्पादन + swap-direction: दिशा बदलें + status-ok: सीमा में + copy-output: आउटपुट मान की प्रतिलिपि बनाएँ + title-reference-points: संदर्भ बिंदु + label-signal-type: सिग्नल प्रकार + preset-custom: रिवाज़ + label-engineering-range: इंजीनियरिंग न्यूनतम/अधिकतम + label-engineering-unit: इंजीनियरिंग इकाई + placeholder-unit: इकाई + error-signal-range: सिग्नल का न्यूनतम मान सिग्नल के अधिकतम मान से कम होना चाहिए। + error-engineering-range: इंजीनियरिंग न्यूनतम, इंजीनियरिंग अधिकतम से कम होना चाहिए। + label-engineering-value: इंजीनियरिंग मूल्य + label-rounded-signal: राउंडेड (पूर्णांक) + status-below-range: सिग्नल निर्धारित सीमा से नीचे है। + status-above-range: सिग्नल निर्धारित सीमा से ऊपर है। + status-below-live-zero: सिग्नल लाइव जीरो से नीचे है, टूटे हुए तार या खराब सेंसर की जांच करें। + engineering-below-range: मान इंजीनियरिंग सीमा से नीचे है, सिग्नल सीमा से बाहर होगा। + engineering-above-range: मान इंजीनियरिंग सीमा से ऊपर है, सिग्नल सीमा से बाहर होगा। + loop-status-failure-low: "निम्न विफलता (≤ 3.6 mA, NAMUR NE 43): टूटा हुआ लूप, + बिजली की कमी या दोषपूर्ण ट्रांसमीटर।" + loop-status-uncertain-low: "3.6 और 3.8 mA के बीच: अपरिभाषित क्षेत्र, विफलता की + संभावना है (NAMUR NE 43)।" + loop-status-under-range: "अंडर-रेंज (3.8 से 4 mA): माप रेंज के निचले सिरे पर संतृप्त हो जाता है।" + loop-status-over-range: "सीमा से अधिक (20 से 20.5 mA): माप सीमा के शीर्ष पर संतृप्त हो जाता है।" + loop-status-uncertain-high: "20.5 और 21 mA के बीच: अपरिभाषित क्षेत्र, विफलता की + संभावना है (NAMUR NE 43)।" + loop-status-failure-high: "उच्च विफलता (≥ 21 mA, NAMUR NE 43): दोषपूर्ण ट्रांसमीटर या शॉर्ट सर्किट।" + label-formula: FORMULA + formula-value: कीमत + formula-signal: संकेत + column-percent: श्रेणी diff --git a/locales/it.yml b/locales/it.yml index 36e56a84..de6dd742 100644 --- a/locales/it.yml +++ b/locales/it.yml @@ -4357,6 +4357,7 @@ tools: label-permanent: Permanente title-generated-fw-command: "Comando fw generato:" tag-const-zone-ref: const zone = ref + tooltip-remove: Rimuovi da questo elenco fortune-wheel: title: Ruota della fortuna description: Una ruota della fortuna configurabile @@ -4372,6 +4373,11 @@ tools: tag-clear-all-options: Cancella tutte le opzioni tag-no-options-added-yet-add-some-options-to-start-spinning: Nessuna opzione aggiunta. Aggiungi qualche opzione per iniziare a girare! tag-: ✕ + wheel-options-wheeloptions-length: Opzioni ruote ({0}) + spinning: Filatura... + spin-to-win: Gira la ruota e vinci! + spin-the-wheel: Gira la ruota! + checkbox-remove-winner-after-spin: Rimuovere il vincitore dopo il giro fstab-generator: title: Generatore FStab description: Genera la riga /etc/fstab @@ -5050,6 +5056,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Tester della tastiera + description: Verifica il corretto funzionamento di tutti i tasti della tastiera. + Ricevi un feedback visivo per ogni tasto premuto, con supporto per diverse + configurazioni di tastiera. + externalAccess: nulla text-to-binary: title: Da testo a binario UTF-8 description: Converti testo nella sua rappresentazione binaria UTF-8 e viceversa. @@ -5264,6 +5275,7 @@ tools: finance: Finanza default: Predefinito toml: TOML + automation: Automazione websocket-tester: title: Tester Websocket description: Consente di testare le connessioni WebSocket @@ -9893,6 +9905,10 @@ tools: tag-copy-json-paths: Copia i percorsi JSON tag-generate-patch: Genera la patch tag-apply-patch: Applica la patch + title: Tester di patch JSON + description: Uno strumento semplice per creare e testare patch JSON conformi a + RFC 6902. E per elencare i percorsi di un oggetto JSON. + externalAccess: nulla ping: title: Ping description: Ping a un insieme di hostname, IP, CIDR o intervalli IP @@ -10211,9 +10227,180 @@ tools: description: Metti alla prova altoparlanti e cuffie riproducendo dei suoni di prova. Regola il volume e verifica la chiarezza dell'audio. externalAccess: nulla + current-loop-4-20ma-converter: + title: Convertitore 4-20 mA + description: Converti una corrente da 4-20 mA (o da 0-20 mA) in un valore + ingegneristico e viceversa, con la diagnostica di loop NAMUR NE 43. + texts: + signal-label: Attuale + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: Convertitore da 0 a 10 V + description: Convertire una tensione di 0-10 V, 2-10 V, 0-5 V, 1-5 V o ±10 V in + un valore ingegneristico e viceversa. + texts: + signal-label: Voltaggio + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Calcolatrice analogica con scala graduata + description: Convertire un valore analogico grezzo di un PLC (Siemens 0-27648, + Schneider 0-10000, 12/15/16 bit...) in un valore ingegneristico e + viceversa. + texts: + signal-label: valore grezzo + preset-siemens-unipolar: Siemens S7 unipolare (da 0 a 27648) + preset-siemens-bipolar: Siemens S7 bipolare (-27648 a 27648) + preset-schneider: Schneider M340/M580 (da 0 a 10000) + preset-12-bits: 12 bit (da 0 a 4095) + preset-15-bits: 15 bit (da 0 a 32767) + preset-16-bits: 16 bit (da 0 a 65535) + paste-image: + texts: + copy-image: Copia immagine + copy-as-base64: Copia come base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + Il tuo browser non è in grado di codificare {0}. L'immagine verrà + scaricata come {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Output: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Originale: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Cancella tutto + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} incollato in questa sessione" + quality: "{0}%" + paste-from-clipboard: Incolla dagli appunti + the-image-stays-in-your-browser-nothing-is-uploaded: L'immagine rimane nel tuo browser. Non viene caricato nulla. + anywhere-on-this-page-to-paste-an-image: È possibile incollare un'immagine in qualsiasi punto di questa pagina. + press: Premere + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: Il browser non è riuscito a copiare l'URL dei dati base64 negli appunti. + base64-data-url-copied-to-the-clipboard: URL dei dati Base64 copiato negli appunti + the-browser-could-not-copy-the-image-to-the-clipboard: Il browser non è riuscito a copiare l'immagine negli appunti. + image-copied-to-the-clipboard: Immagine copiata negli appunti + the-browser-could-not-read-the-clipboard: Il browser non è riuscito a leggere gli appunti. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Il browser ha bloccato l'accesso agli appunti. Consentilo nelle + impostazioni del sito oppure premi {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Il tuo browser non può leggere le immagini dagli appunti tramite un + pulsante. Premi invece {0}. + the-browser-could-not-read-the-pasted-image: Il browser non è riuscito a leggere l'immagine incollata. + the-browser-could-not-convert-the-image: Il browser non è riuscito a convertire l'immagine. + the-clipboard-has-no-image-copy-an-image-then-try-again: Gli appunti non contengono immagini. Copia un'immagine e riprova. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Incolla l'immagine + description: Incolla un'immagine dagli appunti, convertila in PNG, JPEG o WebP e + scaricala. + externalAccess: nulla + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Converti CRLF → LF + lf-endings: Finali LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Taglia le righe a sinistra e riunisci i paragrafi per Reddit, Discord, + Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Unire i paragrafi a capo morbido + smart-unwrap: Smart unwrap + strip-from-patches: Rimuovi + - {'@'}{'@'} dalle patch + diff-markers: Marcatori differenziali + remove-common-leading-indent: Rimuovere il rientro iniziale comune + indent: Rientro + collapse-2-blank-lines-into-1: Comprimi 2 o più righe vuote in 1 + blank-lines: Righe vuote + remove-end-of-line-whitespace: Rimuovere gli spazi bianchi a fine riga + trailing-space: spazio di trascinamento + strip-prefixes: Rimuovere i prefissi ●, ○, ⏺ + bullet-markers: marcatori di proiettili + remove-characters: Rimuovi i caratteri ─ │ └ ┐ + box-drawing: Disegno della scatola + strip-color-escape-sequences: Sequenze di fuga a colori a strisce + ansi-codes: Codici ANSI + strip-1-2-1-t-prefixes: Rimuovere i prefissi 1│, 2│, 1\\t + line-numbers: Numeri di riga + texts: + cleaning-options: Opzioni di pulizia + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Il risultato della pulizia verrà visualizzato qui. + paste-fragmented-claude-code-output-here: Incolla qui l'output frammentato del Codice Claude… + sample: Campione + paste: Impasto + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Copia non riuscita. L'output è selezionato. Premi Ctrl+C per copiarlo. + copied-to-the-clipboard: Copiato negli appunti. + the-clipboard-api-is-unavailable: L'API Appunti non è disponibile. + copy-failed: Copia non riuscita + copied: Copiato ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} righe · {1} caratteri · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} righe · {1} caratteri" + title: Pulizia degli spazi bianchi + description: "Output pulito del terminale e del codice Claude: rimozione dei + numeri di riga, dei codici ANSI, del disegno del riquadro, dei marcatori a + punti elenco, dei marcatori di differenza e degli spazi bianchi extra." + externalAccess: nulla + cli-banner-generator: + title: Generatore di banner CLI + description: Genera banner ASCII e messaggi del giorno (MOTD) per le tue + applicazioni CLI, terminali o router. + externalAccess: nulla + texts: + label-border-char: "Carattere di confine:" + placeholder-: "#" + label-width-min-20-max-200: "Larghezza (min. 20 – max. 200):" + label-banner-text: "Testo del banner:" + placeholder-enter-motd-banner-text-here: Inserisci qui il testo del banner MOTD... + title-generated-banner: Banner generato collapsibleToolMenu: text: expanding: Espansione in corso... collapsing: Compressione in corso... collapse-all-tools: Comprimi tutti gli strumenti expand-all-tools: Espandi tutti gli strumenti +analogSignalConverter: + texts: + title-input: Ingresso + title-parameters: Parametri + title-output: Produzione + swap-direction: Invertire la direzione + status-ok: Nel raggio d'azione + copy-output: Copia il valore di output + title-reference-points: Punti di riferimento + label-signal-type: Tipo di segnale + preset-custom: Costume + label-engineering-range: Ingegneria min / max + label-engineering-unit: Unità di ingegneria + placeholder-unit: Unità + error-signal-range: Il valore minimo del segnale deve essere inferiore al valore + massimo del segnale. + error-engineering-range: Il valore minimo ingegneristico deve essere inferiore + al valore massimo ingegneristico. + label-engineering-value: Valore ingegneristico + label-rounded-signal: Arrotondato (intero) + status-below-range: Il segnale è al di sotto della portata. + status-above-range: Il segnale è al di sopra del range. + status-below-live-zero: Il segnale è al di sotto dello zero della fase, + verificare la presenza di un filo interrotto o di un sensore difettoso. + engineering-below-range: Il valore è al di sotto dell'intervallo previsto, il + segnale sarà fuori intervallo. + engineering-above-range: Il valore è al di sopra dell'intervallo previsto, il + segnale sarà fuori intervallo. + loop-status-failure-low: "Guasto di basso valore (≤ 3,6 mA, NAMUR NE 43): + circuito interrotto, trasmettitore non alimentato o difettoso." + loop-status-uncertain-low: "Tra 3,6 e 3,8 mA: zona non definita, è probabile un guasto (NAMUR NE 43)." + loop-status-under-range: "Valore inferiore al limite (da 3,8 a 4 mA): la + misurazione è satura nella parte inferiore del range." + loop-status-over-range: "Fuori scala (da 20 a 20,5 mA): la misurazione è satura + nella parte superiore della gamma." + loop-status-uncertain-high: "Tra 20,5 e 21 mA: zona non definita, è probabile un guasto (NAMUR NE 43)." + loop-status-failure-high: "Guasto elevato (≥ 21 mA, NAMUR NE 43): trasmettitore + difettoso o cortocircuito." + label-formula: Formula + formula-value: valore + formula-signal: segnale + column-percent: Allineare diff --git a/locales/ko.yml b/locales/ko.yml index 272d39f3..c87496d0 100644 --- a/locales/ko.yml +++ b/locales/ko.yml @@ -123,6 +123,7 @@ tools: finance: 재원 default: 기본 toml: 톰 + automation: 오토메이션 password-strength-analyser: title: 비밀번호 강도 분석기 description: 클라이언트 사이드에서만 동작하는 비밀번호 강도 분석 및 해킹 예상 시간 추정 도구입니다. @@ -4564,6 +4565,7 @@ tools: label-permanent: 영구적인 title-generated-fw-command: "생성된 fw 명령:" tag-const-zone-ref: 상수 영역 = 참조 + tooltip-remove: 이 목록에서 제거 title: firewalld 명령줄 생성기 description: firewalld 명령줄 생성 fortune-wheel: @@ -4581,6 +4583,11 @@ tools: tag-clear-all-options: 모든 옵션 지우기 tag-no-options-added-yet-add-some-options-to-start-spinning: 아직 추가된 옵션이 없습니다. 옵션을 추가하여 회전을 시작하세요! tag-: ✕ + wheel-options-wheeloptions-length: 휠 옵션 ({0}) + spinning: 제사... + spin-to-win: 돌려서 승리하세요! + spin-the-wheel: 룰렛을 돌려보세요! + checkbox-remove-winner-after-spin: 스핀 후 당첨자 제거 fstab-generator: title: FStab 생성기 description: /etc/fstab 라인 생성 @@ -8800,6 +8807,10 @@ tools: label-azerty: 아제르티 label-dvorak: 드보락 label-colemak: 콜맥 + title: 키보드 테스터 + description: 키보드 키를 테스트하고 모든 키가 제대로 작동하는지 확인하세요. 다양한 키보드 레이아웃을 지원하며, 키를 누를 때마다 + 시각적인 피드백을 제공합니다. + externalAccess: 널 markdown-to-data: texts: label-paste-your-markdown-content: "마크다운 콘텐츠를 붙여넣으세요:" @@ -9374,6 +9385,9 @@ tools: tag-copy-json-paths: JSON 경로를 복사하세요 tag-generate-patch: 패치를 생성합니다 tag-apply-patch: 패치를 붙이세요 + title: JSON 패치 테스터 + description: RFC 6902에 따라 JSON 패치를 생성하고 테스트하는 간단한 도구입니다. 또한 JSON 객체의 경로 목록을 표시합니다. + externalAccess: 널 ping: title: 핑 description: 호스트 이름, IP 주소, CIDR 또는 IP 범위에 대해 ping을 실행합니다. @@ -9686,6 +9700,121 @@ tools: title: 사운드 테스터 description: 스피커와 헤드폰을 테스트하려면 테스트 사운드를 재생해 보세요. 볼륨을 조절하고 음질이 양호한지 확인하십시오. externalAccess: 널 + current-loop-4-20ma-converter: + title: 4-20mA 변환기 + description: NAMUR NE 43 루프 진단기를 사용하여 4-20mA(또는 0-20mA) 전류를 공학적 값으로 변환하고 다시 역변환할 수 있습니다. + texts: + signal-label: 현재의 + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20mA + voltage-0-10v-converter: + title: 0-10V 변환기 + description: 0-10V, 2-10V, 0-5V, 1-5V 또는 ±10V 전압을 공학적 값으로 변환하고 다시 원래 값으로 변환합니다. + texts: + signal-label: 전압 + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: 아날로그 스케일링 계산기 + description: PLC 아날로그 원시 값(지멘스 0-27648, 슈나이더 0-10000, 12/15/16비트 등)을 엔지니어링 값으로 + 변환하고 다시 역변환합니다. + texts: + signal-label: 원값 + preset-siemens-unipolar: 지멘스 S7 단극형(0~27648) + preset-siemens-bipolar: 지멘스 S7 바이폴라(-27648 ~ 27648) + preset-schneider: 슈나이더 M340/M580 (0~10000) + preset-12-bits: 12비트(0~4095) + preset-15-bits: 15비트(0~32767) + preset-16-bits: 16비트(0~65535) + paste-image: + texts: + copy-image: 이미지 복사 + copy-as-base64: base64 형식으로 복사 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: 브라우저에서 {0}을 인코딩할 수 없습니다. 이미지가 {1}로 다운로드됩니다. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "출력: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "원본: {0}, {1}" + image-width-image-height-px: "{0} × {1} 픽셀" + clear-all: 모두 지우기 + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} 이 세션에 붙여넣었습니다" + quality: "{0}%" + paste-from-clipboard: 클립보드에서 붙여넣기 + the-image-stays-in-your-browser-nothing-is-uploaded: 이미지는 브라우저에 남아 있습니다. 아무것도 업로드되지 않습니다. + anywhere-on-this-page-to-paste-an-image: 이 페이지 아무 곳에나 이미지를 붙여넣으세요. + press: 누르다 + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: 브라우저가 base64로 인코딩된 데이터 URL을 클립보드에 복사할 수 없습니다. + base64-data-url-copied-to-the-clipboard: Base64 데이터 URL이 클립보드에 복사되었습니다. + the-browser-could-not-copy-the-image-to-the-clipboard: 브라우저가 이미지를 클립보드에 복사할 수 없습니다. + image-copied-to-the-clipboard: 이미지가 클립보드에 복사되었습니다. + the-browser-could-not-read-the-clipboard: 브라우저가 클립보드를 읽을 수 없습니다. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: 브라우저에서 클립보드 접근을 차단했습니다. 사이트 설정에서 허용하거나 {0}을 누르세요. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: 브라우저에서 버튼으로 클립보드의 이미지를 읽을 수 없습니다. 대신 {0}을 누르세요. + the-browser-could-not-read-the-pasted-image: 브라우저가 붙여넣은 이미지를 읽을 수 없습니다. + the-browser-could-not-convert-the-image: 브라우저가 이미지를 변환할 수 없습니다. + the-clipboard-has-no-image-copy-an-image-then-try-again: 클립보드에 이미지가 없습니다. 이미지를 복사한 후 다시 시도하세요. + ctrl-v: Ctrl + V + v: ⌘ + V + title: 이미지 붙여넣기 + description: 클립보드에서 이미지를 붙여넣고, PNG, JPEG 또는 WebP 형식으로 변환한 후 다운로드하세요. + externalAccess: 널 + whitespace-cleaner: + options: + texts: + convert-crlf-lf: CRLF를 LF로 변환 + lf-endings: LF 엔딩 + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: 레딧, 디스코드, 슬랙에서 왼쪽 줄 바꿈 및 단락 다시 합치기 + markdown-reddit: 마크다운 / 레딧 + join-soft-wrapped-paragraphs: 부드럽게 포장된 단락들을 연결하세요 + smart-unwrap: 스마트 언랩 + strip-from-patches: 패치에서 + - {'@'}{'@'}를 제거하세요 + diff-markers: 디프 마커 + remove-common-leading-indent: 공통 선행 들여쓰기를 제거합니다 + indent: 톱니 모양 + collapse-2-blank-lines-into-1: 두 개 이상의 빈 줄을 한 줄로 합칩니다 + blank-lines: 빈 줄 + remove-end-of-line-whitespace: 줄 끝 공백을 제거하세요 + trailing-space: 후행 공간 + strip-prefixes: ●, ○, ⏺ 접두사를 제거하세요 + bullet-markers: 총알 표시기 + remove-characters: ─ │ └ ┐ 문자를 제거하세요 + box-drawing: 박스 드로잉 + strip-color-escape-sequences: 스트립 색상 탈출 시퀀스 + ansi-codes: ANSI 코드 + strip-1-2-1-t-prefixes: 1│, 2│, 1\\t 접두사를 제거하세요 + line-numbers: 줄 번호 + texts: + cleaning-options: 청소 옵션 + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: 정리된 결과물이 여기에 표시됩니다. + paste-fragmented-claude-code-output-here: 조각난 Claude Code 출력 결과를 여기에 붙여넣으세요… + sample: 견본 + paste: 반죽 + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: 복사에 실패했습니다. 출력물이 선택되었습니다. Ctrl+C를 눌러 복사하세요. + copied-to-the-clipboard: 클립보드에 복사되었습니다. + the-clipboard-api-is-unavailable: 클립보드 API를 사용할 수 없습니다. + copy-failed: 복사 실패 + copied: 복사됨 ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0}줄 · {1}자 · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0}줄 · {1}자" + title: 화이트스페이스 클리너 + description: 터미널 및 Claude Code 출력에서 줄 번호, ANSI 코드, 박스 그리기, 글머리 기호, 차이 표시 및 불필요한 + 공백을 제거하여 깔끔하게 정리합니다. + externalAccess: 널 + cli-banner-generator: + title: CLI 배너 생성기 + description: CLI 애플리케이션, 터미널 또는 라우터용 ASCII 배너 및 오늘의 메시지(MOTD)를 생성합니다. + externalAccess: 널 + texts: + label-border-char: "보더 차르:" + placeholder-: "#" + label-width-min-20-max-200: "너비 (최소 20 – 최대 200):" + label-banner-text: "배너 텍스트:" + placeholder-enter-motd-banner-text-here: 오늘의 주요 뉴스 배너 문구를 여기에 입력하세요... + title-generated-banner: 생성된 배너 about: alltools-title: 모든 {toolsCount}개 도구 tools: @@ -9753,3 +9882,36 @@ collapsibleToolMenu: collapsing: 무너지고 있다... collapse-all-tools: 모든 도구 접기 expand-all-tools: 모든 도구 펼치기 +analogSignalConverter: + texts: + title-input: 입력 + title-parameters: 매개변수 + title-output: 산출 + swap-direction: 방향 전환 + status-ok: 범위 내 + copy-output: 출력값을 복사하세요 + title-reference-points: 기준점 + label-signal-type: 신호 유형 + preset-custom: 관습 + label-engineering-range: 엔지니어링 최소/최대 + label-engineering-unit: 엔지니어링 부서 + placeholder-unit: 단위 + error-signal-range: 신호 최소값은 신호 최대값보다 낮아야 합니다. + error-engineering-range: 공학적 최소값은 공학적 최대값보다 낮아야 합니다. + label-engineering-value: 엔지니어링 가치 + label-rounded-signal: 반올림된 (정수) + status-below-range: 신호가 허용 범위를 벗어났습니다. + status-above-range: 신호가 허용 범위를 벗어났습니다. + status-below-live-zero: 신호가 기준치(0)보다 낮습니다. 배선 단선이나 센서 고장 여부를 확인하십시오. + engineering-below-range: 값이 엔지니어링 범위 미만이므로 신호가 범위를 벗어납니다. + engineering-above-range: 값이 엔지니어링 범위를 벗어났으므로 신호가 범위를 이탈하게 됩니다. + loop-status-failure-low: "낮은 고장률(≤ 3.6mA, NAMUR NE 43): 회로 단선, 전원 공급 안 됨 또는 송신기 고장." + loop-status-uncertain-low: "3.6~3.8mA 사이: 정의되지 않은 영역, 고장 발생 가능성 높음(NAMUR NE 43)." + loop-status-under-range: "측정 범위 하한(3.8~4mA): 측정값이 범위의 하단에서 포화됩니다." + loop-status-over-range: "범위 초과(20~20.5mA): 측정값이 범위의 최상단에서 포화됩니다." + loop-status-uncertain-high: "20.5~21mA 사이: 정의되지 않은 영역, 고장 발생 가능성이 높음(NAMUR NE 43)." + loop-status-failure-high: "높은 고장률(≥ 21mA, NAMUR NE 43): 송신기 불량 또는 단락." + label-formula: 공식 + formula-value: 값 + formula-signal: 신호 + column-percent: 범위 diff --git a/locales/nl.yml b/locales/nl.yml index 640c9381..59cd4666 100644 --- a/locales/nl.yml +++ b/locales/nl.yml @@ -125,6 +125,7 @@ tools: finance: Financiën default: Standaard toml: TOML + automation: Automatisering password-strength-analyser: title: Wachtwoord sterkte-analyse description: Ontdek de sterkte van je wachtwoord met deze client-side-only @@ -4844,6 +4845,7 @@ tools: label-permanent: Permanent title-generated-fw-command: "Gegenereerde fw-opdracht:" tag-const-zone-ref: constante zone = ref + tooltip-remove: Verwijderen van deze lijst title: firewalld opdrachtregelgenerator description: Genereer firewalld-opdrachtregels fortune-wheel: @@ -4863,6 +4865,11 @@ tools: Nog geen opties toegevoegd. Voeg wat opties toe om te beginnen met spinnen! tag-: ✕ + wheel-options-wheeloptions-length: Wielopties ({0}) + spinning: Draaien... + spin-to-win: Draai aan het draaiwiel en win! + spin-the-wheel: Draai aan het wiel! + checkbox-remove-winner-after-spin: Verwijder de winnaar na de draai. fstab-generator: title: FStab-generator description: Genereer /etc/fstab-regel @@ -9275,6 +9282,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Toetsenbordtester + description: Test de toetsen van je toetsenbord en controleer of alle toetsen + goed werken. Je krijgt visuele feedback bij elke toetsaanslag en er is + ondersteuning voor verschillende toetsenbordindelingen. + externalAccess: "null" markdown-to-data: texts: label-paste-your-markdown-content: "Plak hier je markdown-inhoud:" @@ -9864,6 +9876,10 @@ tools: tag-copy-json-paths: Kopieer JSON-paden tag-generate-patch: Patch genereren tag-apply-patch: Plak de patch + title: JSON-patchtester + description: Een eenvoudige tool voor het maken en testen van JSON-patches + volgens RFC 6902. En voor het weergeven van paden van een JSON-object. + externalAccess: "null" ping: title: Ping description: Ping een set hostnamen, IP-adressen, CIDR-waarden of een IP-bereik. @@ -10198,6 +10214,134 @@ tools: description: Test je luidsprekers en hoofdtelefoon door testgeluiden af te spelen. Pas het volume aan en controleer of het geluid helder is. externalAccess: "null" + current-loop-4-20ma-converter: + title: 4-20 mA converter + description: Converteer een stroom van 4-20 mA (of 0-20 mA) naar een technische + waarde en vice versa met de NAMUR NE 43 lusdiagnose. + texts: + signal-label: Huidig + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: 0-10 V-omvormer + description: Zet een spanning van 0-10 V, 2-10 V, 0-5 V, 1-5 V of ±10 V om naar + een technische waarde en vice versa. + texts: + signal-label: Spanning + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Analoge schaalcalculator + description: Schaal een ruwe analoge PLC-waarde (Siemens 0-27648, Schneider + 0-10000, 12/15/16 bits...) naar een technische waarde en weer terug. + texts: + signal-label: Ruwe waarde + preset-siemens-unipolar: Siemens S7 unipolair (0 tot 27648) + preset-siemens-bipolar: Siemens S7 bipolair (-27648 tot 27648) + preset-schneider: Schneider M340/M580 (0 tot 10000) + preset-12-bits: 12 bits (0 tot 4095) + preset-15-bits: 15 bits (0 tot 32767) + preset-16-bits: 16 bits (0 tot 65535) + paste-image: + texts: + copy-image: Afbeelding kopiëren + copy-as-base64: Kopiëren als base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Uw browser kan {0} niet coderen. De afbeelding wordt gedownload als {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Uitvoer: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Origineel: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Alles wissen + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} geplakt in deze sessie" + quality: "{0}%" + paste-from-clipboard: Plakken vanuit het klembord + the-image-stays-in-your-browser-nothing-is-uploaded: De afbeelding blijft in uw browser staan. Er wordt niets geüpload. + anywhere-on-this-page-to-paste-an-image: Plak een afbeelding overal op deze pagina. + press: Pers + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: De browser kon de base64-gegevens-URL niet naar het klembord kopiëren. + base64-data-url-copied-to-the-clipboard: De URL van de Base64-gegevens is naar het klembord gekopieerd. + the-browser-could-not-copy-the-image-to-the-clipboard: De browser kon de afbeelding niet naar het klembord kopiëren. + image-copied-to-the-clipboard: Afbeelding gekopieerd naar het klembord + the-browser-could-not-read-the-clipboard: De browser kon het klembord niet lezen. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + De browser heeft de toegang tot het klembord geblokkeerd. Schakel dit in + via de site-instellingen of druk op {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Uw browser kan geen afbeeldingen van het klembord lezen met een knop. + Druk in plaats daarvan op {0}. + the-browser-could-not-read-the-pasted-image: De browser kon de geplakte afbeelding niet lezen. + the-browser-could-not-convert-the-image: De browser kon de afbeelding niet converteren. + the-clipboard-has-no-image-copy-an-image-then-try-again: Het klembord bevat geen + afbeelding. Kopieer een afbeelding en probeer het opnieuw. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Afbeelding plakken + description: Plak een afbeelding vanuit je klembord, converteer deze naar PNG, + JPEG of WebP en download hem. + externalAccess: "null" + whitespace-cleaner: + options: + texts: + convert-crlf-lf: CRLF converteren → LF + lf-endings: LF-eindes + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Knip regels aan de linkerkant af en voeg alinea's weer samen voor + Reddit, Discord en Slack. + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Voeg alinea's met zachte omslag samen + smart-unwrap: Slimme uitpakfunctie + strip-from-patches: Verwijder + - {'@'}{'@'} uit patches + diff-markers: Verschillende markers + remove-common-leading-indent: Verwijder de gebruikelijke inkeping aan het begin. + indent: Inspringen + collapse-2-blank-lines-into-1: Vouw 2 of meer lege regels samen tot 1 regel + blank-lines: Lege regels + remove-end-of-line-whitespace: Verwijder witruimte aan het einde van de regel. + trailing-space: Achterliggende ruimte + strip-prefixes: Verwijder de voorvoegsels ●, ○, ⏺ + bullet-markers: Kogelmarkeringen + remove-characters: Verwijder de tekens ─ │ └ ┐ + box-drawing: Boxtekening + strip-color-escape-sequences: Stripkleur ontsnappingssequenties + ansi-codes: ANSI-codes + strip-1-2-1-t-prefixes: Verwijder de voorvoegsels 1│, 2│, 1\\t + line-numbers: Regelnummers + texts: + cleaning-options: Reinigingsopties + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Uw opgeschoonde uitvoer verschijnt hier. + paste-fragmented-claude-code-output-here: Plak hier de gefragmenteerde uitvoer van Claude Code… + sample: Steekproef + paste: Plakken + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Kopiëren mislukt. De + uitvoer is geselecteerd. Druk op Ctrl+C om deze te kopiëren. + copied-to-the-clipboard: Gekopieerd naar het klembord. + the-clipboard-api-is-unavailable: De Clipboard API is niet beschikbaar. + copy-failed: Kopiëren mislukt + copied: Gekopieerd ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} regels · {1} tekens · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} regels · {1} tekens" + title: Witruimte-opschoner + description: "Schone terminal- en Claude-code-uitvoer: verwijder regelnummers, + ANSI-codes, kadertekeningen, opsommingstekens, verschilmarkeringen en + extra witruimte." + externalAccess: "null" + cli-banner-generator: + title: CLI-bannergenerator + description: Genereer ASCII-banners en 'Message of the Day' (MOTD) voor uw + CLI-applicaties, terminal of router. + externalAccess: "null" + texts: + label-border-char: "Randkarakter:" + placeholder-: "#" + label-width-min-20-max-200: "Breedte (min. 20 – max. 200):" + label-banner-text: "Bannertekst:" + placeholder-enter-motd-banner-text-here: Voer hier de tekst voor de MOTD-banner in... + title-generated-banner: Gegenereerde banner about: alltools-title: Alle {toolsCount}-hulpmiddelen tools: @@ -10276,3 +10420,44 @@ collapsibleToolMenu: collapsing: Instorten... collapse-all-tools: Alle tools inklappen expand-all-tools: Alle tools uitbreiden +analogSignalConverter: + texts: + title-input: Invoer + title-parameters: Parameters + title-output: Uitvoer + swap-direction: Wissel van richting + status-ok: Binnen bereik + copy-output: Kopieer de uitvoerwaarde + title-reference-points: Referentiepunten + label-signal-type: Signaaltype + preset-custom: Aangepast + label-engineering-range: Technische min/max + label-engineering-unit: Technische afdeling + placeholder-unit: Eenheid + error-signal-range: Het minimale signaal moet lager zijn dan het maximale signaal. + error-engineering-range: De minimale technische waarde moet lager zijn dan de + maximale technische waarde. + label-engineering-value: Technische waarde + label-rounded-signal: Afgerond (geheel getal) + status-below-range: Het signaal ligt onder het bereik. + status-above-range: Het signaal ligt boven het bereik. + status-below-live-zero: Het signaal ligt onder de nulwaarde; controleer op een + gebroken draad of een defecte sensor. + engineering-below-range: De waarde ligt onder het technische bereik, het signaal + valt buiten het bereik. + engineering-above-range: De waarde ligt boven het technische bereik, het signaal valt buiten bereik. + loop-status-failure-low: "Lage uitval (≤ 3,6 mA, NAMUR NE 43): onderbroken lus, + geen stroomtoevoer of defecte zender." + loop-status-uncertain-low: "Tussen 3,6 en 3,8 mA: ongedefinieerd gebied, een + storing is waarschijnlijk (NAMUR NE 43)." + loop-status-under-range: "Onder het bereik (3,8 tot 4 mA): de meting raakt + verzadigd aan de onderkant van het bereik." + loop-status-over-range: "Overbereik (20 tot 20,5 mA): de meting raakt verzadigd + aan de bovenkant van het bereik." + loop-status-uncertain-high: "Tussen 20,5 en 21 mA: ongedefinieerd gebied, een + storing is waarschijnlijk (NAMUR NE 43)." + loop-status-failure-high: "Hoge uitval (≥ 21 mA, NAMUR NE 43): defecte zender of kortsluiting." + label-formula: Formule + formula-value: waarde + formula-signal: signaal + column-percent: Bereik diff --git a/locales/no.yml b/locales/no.yml index 3590a444..9f9352be 100644 --- a/locales/no.yml +++ b/locales/no.yml @@ -179,6 +179,7 @@ tools: finance: Finansiere default: Misligholde toml: TOML + automation: Automasjon password-strength-analyser: title: Analyseverktøy for passordstyrke description: Oppdag styrken av passordet ditt med dette kun-klient-maskin @@ -4857,6 +4858,7 @@ tools: label-permanent: Fast title-generated-fw-command: "Generert fw-kommando:" tag-const-zone-ref: konstant sone = ref + tooltip-remove: Fjern fra denne listen title: firewalld kommandolinjegenerator description: Generer firewalld-kommandolinjer fortune-wheel: @@ -4876,6 +4878,11 @@ tools: Ingen alternativer lagt til ennå. Legg til noen alternativer for å begynne å spinne! tag-: ✕ + wheel-options-wheeloptions-length: Hjulalternativer ({0}) + spinning: Spinning... + spin-to-win: Spinn for å vinne! + spin-the-wheel: Snurr hjulet! + checkbox-remove-winner-after-spin: Fjern vinneren etter spinn fstab-generator: title: FStab-generator description: Generer /etc/fstab-linjen @@ -9231,6 +9238,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Tastaturtester + description: Test tastene på tastaturet og sjekk om alle tastene fungerer som de + skal. Visuell tilbakemelding for hvert tastetrykk med støtte for + forskjellige tastaturoppsett. + externalAccess: "null" markdown-to-data: texts: label-paste-your-markdown-content: "Lim inn markdown-innholdet ditt:" @@ -9819,6 +9831,10 @@ tools: tag-copy-json-paths: Kopier JSON-stier tag-generate-patch: Generer oppdatering tag-apply-patch: Påfør lapp + title: Json-patchtester + description: Et enkelt verktøy for å lage og teste JSON-patcher i henhold til + RFC 6902. Og liste opp stier til et JSON-objekt. + externalAccess: "null" ping: title: Ping description: Ping et sett med vertsnavn, IP-adresser, CIDR eller IP-område @@ -10149,6 +10165,135 @@ tools: description: Test høyttalerne og hodetelefonene dine ved å spille av testlyder. Juster volumet og sjekk lydkvaliteten. externalAccess: "null" + current-loop-4-20ma-converter: + title: 4–20 mA-omformer + description: Konverter en 4–20 mA (eller 0–20 mA) strøm til en ingeniørverdi og + tilbake, med NAMUR NE 43 sløyfediagnostikk. + texts: + signal-label: Nåværende + label-4-20-ma: 4–20 mA + label-0-20-ma: 0–20 mA + voltage-0-10v-converter: + title: 0–10 V-omformer + description: Konverter en 0–10 V, 2–10 V, 0–5 V, 1–5 V eller ±10 V spenning til + en ingeniørverdi og tilbake. + texts: + signal-label: Spenning + label-0-10-v: 0–10 V + label-2-10-v: 2–10 V + label-0-5-v: 0–5 V + label-1-5-v: 1–5 V + label-10-v: ±10V + analog-scaling-calculator: + title: Analog skaleringskalkulator + description: Skaler en rå PLS-analogverdi (Siemens 0-27648, Schneider 0-10000, + 12/15/16 bits...) til en ingeniørverdi og tilbake. + texts: + signal-label: Rå verdi + preset-siemens-unipolar: Siemens S7 unipolar (0 til 27648) + preset-siemens-bipolar: Siemens S7 bipolar (-27648 til 27648) + preset-schneider: Schneider M340/M580 (0 til 10000) + preset-12-bits: 12 bits (0 til 4095) + preset-15-bits: 15 bits (0 til 32767) + preset-16-bits: 16 bits (0 til 65535) + paste-image: + texts: + copy-image: Kopier bilde + copy-as-base64: Kopier som base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Nettleseren din kan ikke kode {0}. Bildet lastes ned som {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Utdata: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Opprinnelig: {0}, {1}" + image-width-image-height-px: "{0} × {1} piksler" + clear-all: Fjern alle + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} limt inn i denne økten" + quality: "{0}%" + paste-from-clipboard: Lim inn fra utklippstavlen + the-image-stays-in-your-browser-nothing-is-uploaded: Bildet forblir i nettleseren din. Ingenting lastes opp. + anywhere-on-this-page-to-paste-an-image: hvor som helst på denne siden for å lime inn et bilde. + press: Pressen + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + Nettleseren kunne ikke kopiere URL-adressen for base64-data til + utklippstavlen. + base64-data-url-copied-to-the-clipboard: Base64-data-URL kopiert til utklippstavlen + the-browser-could-not-copy-the-image-to-the-clipboard: Nettleseren kunne ikke kopiere bildet til utklippstavlen. + image-copied-to-the-clipboard: Bildet er kopiert til utklippstavlen + the-browser-could-not-read-the-clipboard: Nettleseren kunne ikke lese utklippstavlen. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Nettleseren blokkerte tilgang til utklippstavlen. Tillat det i + nettstedinnstillingene, eller trykk på {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Nettleseren din kan ikke lese bilder fra utklippstavlen med en knapp. + Trykk på {0} i stedet. + the-browser-could-not-read-the-pasted-image: Nettleseren kunne ikke lese det innlimte bildet. + the-browser-could-not-convert-the-image: Nettleseren kunne ikke konvertere bildet. + the-clipboard-has-no-image-copy-an-image-then-try-again: Utklippstavlen har ikke noe bilde. Kopier et bilde, og prøv på nytt. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Lim inn bilde + description: Lim inn et bilde fra utklippstavlen, konverter det til PNG, JPEG + eller WebP, og last det ned. + externalAccess: "null" + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Konverter CRLF → LF + lf-endings: LF-avslutninger + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Venstrebeskjær linjer og sammenføy avsnitt på nytt for Reddit, Discord + og Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Koble sammen avsnitt med mykt innpakning + smart-unwrap: Smart utpakking + strip-from-patches: Fjern + - {'@'}{'@'} fra patcher + diff-markers: Differansemarkører + remove-common-leading-indent: Fjern vanlig innledende innrykk + indent: Innrykk + collapse-2-blank-lines-into-1: Skjul 2+ blanke linjer til 1 + blank-lines: Blanke linjer + remove-end-of-line-whitespace: Fjern mellomrom på slutten av linjen + trailing-space: Etterfølgende plass + strip-prefixes: Fjern prefikser ●, ○, ⏺ + bullet-markers: Punktmarkører + remove-characters: Fjern ─ │ └ ┐ tegn + box-drawing: Bokstegning + strip-color-escape-sequences: Stripp farge-escape-sekvenser + ansi-codes: ANSI-koder + strip-1-2-1-t-prefixes: Fjern prefikser for 1│, 2│ og 1\t + line-numbers: Linjenummer + texts: + cleaning-options: Rengjøringsalternativer + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Det rensede resultatet vil vises her. + paste-fragmented-claude-code-output-here: Lim inn fragmentert Claude Code-utdata her… + sample: Prøve + paste: Lim inn + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Kopieringen + mislyktes. Utdataene er valgt. Trykk Ctrl+C for å kopiere dem. + copied-to-the-clipboard: Kopiert til utklippstavlen. + the-clipboard-api-is-unavailable: Utklippstavlens API er ikke tilgjengelig. + copy-failed: Kopieringen mislyktes + copied: Kopiert ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} linjer · {1} tegn · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} linjer · {1} tegn" + title: Fjerning av mellomrom + description: "Ren terminal og Claude Code-utdata: stripe linjenummer, + ANSI-koder, bokstegning, punktmarkører, diff-markører og ekstra + mellomrom." + externalAccess: "null" + cli-banner-generator: + title: CLI-bannergenerator + description: Generer ASCII-bannere, Dagens melding (MOTD) for + CLI-applikasjonene, terminalen eller ruteren din. + externalAccess: "null" + texts: + label-border-char: "Kanttegn:" + placeholder-: "#" + label-width-min-20-max-200: "Bredde (min. 20 – maks. 200):" + label-banner-text: "Bannertekst:" + placeholder-enter-motd-banner-text-here: Skriv inn MOTD-bannertekst her ... + title-generated-banner: Generert banner spanCopyable: copy: Kopier til utklippstavlen copied: Kopiert! @@ -10173,3 +10318,40 @@ collapsibleToolMenu: collapsing: Kollapser... collapse-all-tools: Skjul alle verktøy expand-all-tools: Utvid alle verktøy +analogSignalConverter: + texts: + title-input: Inndata + title-parameters: Parametere + title-output: Produksjon + swap-direction: Bytt retning + status-ok: Innenfor rekkevidde + copy-output: Kopier utgangsverdien + title-reference-points: Referansepunkter + label-signal-type: Signaltype + preset-custom: Skikk + label-engineering-range: Ingeniør min/maks + label-engineering-unit: Ingeniørenhet + placeholder-unit: Enhet + error-signal-range: Signalminimum må være lavere enn signalmaksimum. + error-engineering-range: Ingeniørminimum må være lavere enn ingeniørmaksimum. + label-engineering-value: Ingeniørverdi + label-rounded-signal: Avrundet (heltall) + status-below-range: Signalet er under området. + status-above-range: Signalet er over området. + status-below-live-zero: Signalet er under live zero, sjekk for en ødelagt + ledning eller en defekt sensor. + engineering-below-range: Verdien er under det tekniske området, signalet vil være utenfor området. + engineering-above-range: Verdien er over det tekniske området, signalet vil være utenfor området. + loop-status-failure-low: "Lav feil (≤ 3,6 mA, NAMUR NE 43): ødelagt sløyfe, + strømløs eller defekt sender." + loop-status-uncertain-low: "Mellom 3,6 og 3,8 mA: udefinert sone, en feil er + sannsynlig (NAMUR NE 43)." + loop-status-under-range: "Under område (3,8 til 4 mA): målingen er mettet nederst i området." + loop-status-over-range: "Over område (20 til 20,5 mA): målingen er mettet øverst i området." + loop-status-uncertain-high: "Mellom 20,5 og 21 mA: udefinert sone, en feil er + sannsynlig (NAMUR NE 43)." + loop-status-failure-high: "Høy svikt (≥ 21 mA, NAMUR NE 43): defekt sender eller kortslutning." + label-formula: Formel + formula-value: verdi + formula-signal: signal + column-percent: Spekter diff --git a/locales/pl.yml b/locales/pl.yml index 7a2ffee5..e98c647b 100644 --- a/locales/pl.yml +++ b/locales/pl.yml @@ -175,6 +175,7 @@ tools: finance: Finanse default: Domyślny toml: TOML + automation: Automatyzacja token-generator: title: Generator tokenów description: "Generuje losowy ciąg znaków z wybranych przez Ciebie znaków: @@ -4338,6 +4339,7 @@ tools: label-permanent: Stały title-generated-fw-command: "Wygenerowano polecenie fw:" tag-const-zone-ref: const zone = ref + tooltip-remove: Usuń z tej listy title: generator wiersza poleceń firewalld description: Generuj wiersze poleceń firewalld fortune-wheel: @@ -4355,6 +4357,11 @@ tools: tag-clear-all-options: Wyczyść wszystkie opcje tag-no-options-added-yet-add-some-options-to-start-spinning: Nie dodano jeszcze żadnych opcji. Dodaj kilka opcji, aby zacząć kręcić! tag-: ✕ + wheel-options-wheeloptions-length: Opcje kół ({0}) + spinning: Spinning... + spin-to-win: Zakręć i wygraj! + spin-the-wheel: Zakręć kołem! + checkbox-remove-winner-after-spin: Usuń zwycięzcę po obrocie fstab-generator: title: Generator FStab description: Wygeneruj wiersz /etc/fstab @@ -9288,6 +9295,11 @@ tools: label-azerty: AZERTY label-dvorak: Dvorak label-colemak: COLEMAK + title: Tester klawiatury + description: Przetestuj klawisze klawiatury i sprawdź, czy wszystkie działają + prawidłowo. Wizualna informacja zwrotna dla każdego naciśnięcia klawisza z + obsługą różnych układów klawiatury. + externalAccess: nieważny markdown-to-data: texts: label-paste-your-markdown-content: "Wklej swoją treść w formacie Markdown:" @@ -9874,6 +9886,10 @@ tools: tag-copy-json-paths: Kopiuj ścieżki JSON tag-generate-patch: Wygeneruj łatkę tag-apply-patch: Zastosuj łatkę + title: Tester poprawek Json + description: Proste narzędzie do tworzenia i testowania poprawek JSON zgodnie z + RFC 6902. Wyświetla ścieżki do obiektu JSON. + externalAccess: nieważny ping: title: Świst description: Pingowanie zestawu nazw hostów, adresów IP, CIDR lub zakresu adresów IP @@ -10206,6 +10222,137 @@ tools: description: Przetestuj głośniki i słuchawki, odtwarzając dźwięki testowe. Dostosuj głośność i sprawdź klarowność dźwięku. externalAccess: nieważny + current-loop-4-20ma-converter: + title: Konwerter 4-20 mA + description: Konwertuj prąd 4-20 mA (lub 0-20 mA) na wartość inżynierską i + odwrotnie za pomocą diagnostyki pętli NAMUR NE 43. + texts: + signal-label: Aktualny + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: Konwerter 0-10 V + description: Konwertuje napięcie 0–10 V, 2–10 V, 0–5 V, 1–5 V lub ±10 V na + wartość inżynierską i odwrotnie. + texts: + signal-label: Woltaż + label-0-10-v: 0-10 V + label-2-10-v: 2-10 V + label-0-5-v: 0-5 V + label-1-5-v: 1-5 V + label-10-v: ±10 V + analog-scaling-calculator: + title: Kalkulator skalowania analogowego + description: Skalowanie surowej wartości analogowej PLC (Siemens 0-27648, + Schneider 0-10000, 12/15/16 bitów...) do wartości inżynieryjnej i z + powrotem. + texts: + signal-label: Wartość surowa + preset-siemens-unipolar: Siemens S7 unipolarny (0 do 27648) + preset-siemens-bipolar: Siemens S7 bipolarny (-27648 do 27648) + preset-schneider: Schneider M340/M580 (0 do 10000) + preset-12-bits: 12 bitów (od 0 do 4095) + preset-15-bits: 15 bitów (od 0 do 32767) + preset-16-bits: 16 bitów (od 0 do 65535) + paste-image: + texts: + copy-image: Kopiuj obraz + copy-as-base64: Kopiuj jako base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + Twoja przeglądarka nie może zakodować {0}. Obraz zostanie pobrany jako + {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Wyjście: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Oryginał: {0}, {1}" + image-width-image-height-px: "{0} × {1} pikseli" + clear-all: Wyczyść wszystko + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} wklejono w tej sesji" + quality: "{0}%" + paste-from-clipboard: Wklej ze schowka + the-image-stays-in-your-browser-nothing-is-uploaded: Obraz pozostaje w Twojej przeglądarce. Nic nie jest przesyłane. + anywhere-on-this-page-to-paste-an-image: w dowolnym miejscu na tej stronie, aby wkleić obraz. + press: Naciskać + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: Przeglądarka nie mogła skopiować adresu URL danych base64 do schowka. + base64-data-url-copied-to-the-clipboard: Adres URL danych Base64 skopiowany do schowka + the-browser-could-not-copy-the-image-to-the-clipboard: Przeglądarka nie mogła skopiować obrazu do schowka. + image-copied-to-the-clipboard: Obraz skopiowany do schowka + the-browser-could-not-read-the-clipboard: Przeglądarka nie mogła odczytać schowka. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Przeglądarka zablokowała dostęp do schowka. Zezwól na to w ustawieniach + witryny lub naciśnij {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Twoja przeglądarka nie może odczytać obrazów ze schowka za pomocą + przycisku. Zamiast tego naciśnij {0}. + the-browser-could-not-read-the-pasted-image: Przeglądarka nie mogła odczytać wklejonego obrazu. + the-browser-could-not-convert-the-image: Przeglądarka nie mogła przekonwertować obrazu. + the-clipboard-has-no-image-copy-an-image-then-try-again: W schowku nie ma obrazu. Skopiuj obraz i spróbuj ponownie. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Wklej obraz + description: Wklej obraz ze schowka, przekonwertuj go do formatu PNG, JPEG lub + WebP i pobierz. + externalAccess: nieważny + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Konwertuj CRLF → LF + lf-endings: Zakończenia LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Przycinanie wierszy z lewej strony i ponowne łączenie akapitów w + serwisach Reddit, Discord i Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Połącz akapity w miękkiej oprawie + smart-unwrap: Inteligentne rozpakowywanie + strip-from-patches: Usuń + - {'@'}{'@'} z łatek + diff-markers: Znaczniki różnicowe + remove-common-leading-indent: Usuń wspólne wcięcie wiodące + indent: Wciąć + collapse-2-blank-lines-into-1: Zwiń 2+ puste linie w 1 + blank-lines: Puste linie + remove-end-of-line-whitespace: Usuń odstęp na końcu wiersza + trailing-space: Spacja końcowa + strip-prefixes: Usuń prefiksy ●, ○, ⏺ + bullet-markers: Markery pocisków + remove-characters: Usuń znaki ─ │ └ ┐ + box-drawing: Rysunek pudełkowy + strip-color-escape-sequences: Sekwencje ucieczki kolorów pasków + ansi-codes: Kody ANSI + strip-1-2-1-t-prefixes: Pasek 1│, 2│, prefiksy 1\\t + line-numbers: Numery linii + texts: + cleaning-options: Opcje czyszczenia + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Wyczyszczone dane wyjściowe pojawią się tutaj. + paste-fragmented-claude-code-output-here: Wklej tutaj pofragmentowany kod Claude’a… + sample: Próbka + paste: Pasta + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Kopiowanie nie + powiodło się. Wyjście zostało zaznaczone. Naciśnij Ctrl+C, aby je + skopiować. + copied-to-the-clipboard: Skopiowano do schowka. + the-clipboard-api-is-unavailable: Interfejs API schowka jest niedostępny. + copy-failed: Kopiowanie nie powiodło się + copied: Skopiowano ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} wierszy · {1} znaków · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} wierszy · {1} znaków" + title: Czyszczenie białych przestrzeni + description: "Wyczyść wyjście terminala i Claude Code: numery linii paskowych, + kody ANSI, rysunki ramek, znaczniki punktorów, znaczniki różnic i + dodatkowe odstępy." + externalAccess: nieważny + cli-banner-generator: + title: Generator banerów CLI + description: Generuj banery ASCII, Wiadomość dnia (MOTD) dla aplikacji CLI, + terminala lub routera. + externalAccess: nieważny + texts: + label-border-char: "Znak graniczny:" + placeholder-: "#" + label-width-min-20-max-200: "Szerokość (min. 20 – maks. 200):" + label-banner-text: "Tekst banera:" + placeholder-enter-motd-banner-text-here: Wpisz tutaj tekst banera MOTD... + title-generated-banner: Wygenerowany baner favoriteButton: remove: Usuń z ulubionych add: Dodaj do ulubionych @@ -10233,3 +10380,45 @@ collapsibleToolMenu: collapsing: Zawalenie się... collapse-all-tools: Zwiń wszystkie narzędzia expand-all-tools: Rozwiń wszystkie narzędzia +analogSignalConverter: + texts: + title-input: Wejście + title-parameters: Parametry + title-output: Wyjście + swap-direction: Zmień kierunek + status-ok: W zasięgu + copy-output: Skopiuj wartość wyjściową + title-reference-points: Punkty odniesienia + label-signal-type: Typ sygnału + preset-custom: Zwyczaj + label-engineering-range: Inżynieria min/max + label-engineering-unit: Jednostka inżynieryjna + placeholder-unit: Jednostka + error-signal-range: Minimalna wartość sygnału musi być niższa od maksymalnej wartości sygnału. + error-engineering-range: Minimalny koszt inżynieryjny musi być niższy od + maksymalnego kosztu inżynieryjnego. + label-engineering-value: Wartość inżynierska + label-rounded-signal: Zaokrąglone (liczba całkowita) + status-below-range: Sygnał jest poniżej zakresu. + status-above-range: Sygnał jest poza zakresem. + status-below-live-zero: Jeśli sygnał jest niższy od zera, sprawdź, czy przewód + nie jest przerwany lub czy czujnik nie jest uszkodzony. + engineering-below-range: Jeśli wartość jest poniżej zakresu inżynieryjnego, + sygnał będzie poza zakresem. + engineering-above-range: Jeśli wartość jest powyżej zakresu inżynieryjnego, + sygnał będzie poza zakresem. + loop-status-failure-low: "Niska awaria (≤ 3,6 mA, NAMUR NE 43): przerwana pętla, + nadajnik bez zasilania lub uszkodzony." + loop-status-uncertain-low: "Pomiędzy 3,6 i 3,8 mA: strefa niezdefiniowana, + prawdopodobne jest wystąpienie awarii (NAMUR NE 43)." + loop-status-under-range: "Poniżej zakresu (3,8 do 4 mA): pomiar jest nasycony w + dolnej części zakresu." + loop-status-over-range: "Przekroczenie zakresu (20 do 20,5 mA): pomiar jest + nasycony w górnej części zakresu." + loop-status-uncertain-high: "Pomiędzy 20,5 a 21 mA: strefa niezdefiniowana, + prawdopodobne jest wystąpienie awarii (NAMUR NE 43)." + loop-status-failure-high: "Wysoka awaria (≥ 21 mA, NAMUR NE 43): uszkodzony nadajnik lub zwarcie." + label-formula: Formuła + formula-value: wartość + formula-signal: sygnał + column-percent: Zakres diff --git a/locales/pt.yml b/locales/pt.yml index 345d4975..7ad38c5c 100644 --- a/locales/pt.yml +++ b/locales/pt.yml @@ -180,6 +180,7 @@ tools: finance: Financiar default: Padrão toml: TOML + automation: Automação csv-to-json: title: CSV para JSON description: Converte CSV para JSON com detecção automática de cabeçalhos. @@ -4329,6 +4330,7 @@ tools: label-permanent: Permanente title-generated-fw-command: "Comando fw gerado:" tag-const-zone-ref: zona constante = ref + tooltip-remove: Remover desta lista title: gerador de linha de comando firewalld description: Gerar linhas de comando do firewalld fortune-wheel: @@ -4348,6 +4350,11 @@ tools: Nenhuma opção adicionada ainda. Adicione algumas opções para começar a girar! tag-: ✕ + wheel-options-wheeloptions-length: Opções de roda ({0}) + spinning: Fiação... + spin-to-win: Gire e ganhe! + spin-the-wheel: Gire a roda! + checkbox-remove-winner-after-spin: Remova o vencedor após a rodada. fstab-generator: title: Gerador FStab description: Gerar linha /etc/fstab @@ -9330,6 +9337,11 @@ tools: label-azerty: AZERTY label-dvorak: Dvorak label-colemak: COLEMAK + title: Testador de teclado + description: Teste as teclas do seu teclado e verifique se todas estão + funcionando corretamente. Feedback visual para cada tecla pressionada, com + suporte para diferentes layouts de teclado. + externalAccess: nulo markdown-to-data: texts: label-paste-your-markdown-content: "Cole seu conteúdo em Markdown:" @@ -9922,6 +9934,10 @@ tools: tag-copy-json-paths: Copiar caminhos JSON tag-generate-patch: Gerar patch tag-apply-patch: Aplicar remendo + title: Testador de patches JSON + description: Uma ferramenta simples para criar e testar patches JSON de acordo + com a RFC 6902. E listar os caminhos de um objeto JSON. + externalAccess: nulo ping: title: Ping description: Faça ping em um conjunto de nomes de host, IPs, CIDR ou intervalos de IP. @@ -10254,6 +10270,136 @@ tools: description: Teste seus alto-falantes e fones de ouvido reproduzindo sons de teste. Ajuste o volume e verifique a clareza do áudio. externalAccess: nulo + current-loop-4-20ma-converter: + title: Conversor de 4-20 mA + description: Converta uma corrente de 4-20 mA (ou 0-20 mA) em um valor de + engenharia e vice-versa, com o diagnóstico de loop NAMUR NE 43. + texts: + signal-label: Atual + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: Conversor 0-10 V + description: Converter uma tensão de 0-10 V, 2-10 V, 0-5 V, 1-5 V ou ±10 V em um + valor de engenharia e vice-versa. + texts: + signal-label: Tensão + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Calculadora de escala analógica + description: Converter um valor analógico bruto de um PLC (Siemens 0-27648, + Schneider 0-10000, 12/15/16 bits...) para um valor de engenharia e + vice-versa. + texts: + signal-label: Valor bruto + preset-siemens-unipolar: Siemens S7 unipolar (0 a 27648) + preset-siemens-bipolar: Siemens S7 bipolar (-27648 a 27648) + preset-schneider: Schneider M340/M580 (0 a 10000) + preset-12-bits: 12 bits (0 a 4095) + preset-15-bits: 15 bits (0 a 32767) + preset-16-bits: 16 bits (0 a 65535) + paste-image: + texts: + copy-image: Copiar imagem + copy-as-base64: Copiar como base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Seu navegador não consegue codificar {0}. A imagem será baixada como {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Saída: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Original: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Limpar tudo + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} colado nesta sessão" + quality: "{0}%" + paste-from-clipboard: Colar da área de transferência + the-image-stays-in-your-browser-nothing-is-uploaded: A imagem permanece no seu navegador. Nada é carregado. + anywhere-on-this-page-to-paste-an-image: Você pode colar uma imagem em qualquer lugar desta página. + press: Imprensa + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + O navegador não conseguiu copiar o URL de dados em base64 para a área de + transferência. + base64-data-url-copied-to-the-clipboard: URL de dados Base64 copiada para a área de transferência + the-browser-could-not-copy-the-image-to-the-clipboard: O navegador não conseguiu copiar a imagem para a área de transferência. + image-copied-to-the-clipboard: Imagem copiada para a área de transferência + the-browser-could-not-read-the-clipboard: O navegador não conseguiu ler a área de transferência. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + O navegador bloqueou o acesso à área de transferência. Permita-o nas + configurações do site ou pressione {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Seu navegador não consegue ler imagens da área de transferência com um + botão. Pressione {0} em vez disso. + the-browser-could-not-read-the-pasted-image: O navegador não conseguiu ler a imagem colada. + the-browser-could-not-convert-the-image: O navegador não conseguiu converter a imagem. + the-clipboard-has-no-image-copy-an-image-then-try-again: A área de transferência está vazia. Copie uma imagem e tente novamente. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Colar imagem + description: Cole uma imagem da sua área de transferência, converta-a para PNG, + JPEG ou WebP e faça o download. + externalAccess: nulo + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Converter CRLF → LF + lf-endings: terminações LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Aparar linhas à esquerda e juntar parágrafos para Reddit, Discord e + Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Una parágrafos com quebra de linha suave. + smart-unwrap: Desembrulhar inteligente + strip-from-patches: Remover + - {'@'}{'@'} dos patches + diff-markers: Marcadores diferenciais + remove-common-leading-indent: Remover recuo inicial comum + indent: Recuar + collapse-2-blank-lines-into-1: Reduzir 2 ou mais linhas em branco para 1 + blank-lines: Linhas em branco + remove-end-of-line-whitespace: Remover espaços em branco no final da linha + trailing-space: Espaço de arrasto + strip-prefixes: Remover prefixos ●, ○, ⏺ + bullet-markers: marcadores de bala + remove-characters: Remover ─ │ └ ┐ caracteres + box-drawing: Desenho de caixa + strip-color-escape-sequences: Sequências de escape de cores em tiras + ansi-codes: Códigos ANSI + strip-1-2-1-t-prefixes: Prefixos Strip 1│, 2│, 1\\t + line-numbers: Números de linha + texts: + cleaning-options: Opções de limpeza + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: O resultado da sua limpeza aparecerá aqui. + paste-fragmented-claude-code-output-here: Cole aqui a saída fragmentada do código Claude… + sample: Amostra + paste: Colar + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: A cópia falhou. O + conteúdo está selecionado. Pressione Ctrl+C para copiá-lo. + copied-to-the-clipboard: Copiado para a área de transferência. + the-clipboard-api-is-unavailable: A API da área de transferência não está disponível. + copy-failed: Falha na cópia + copied: Copiado ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} linhas · {1} caracteres · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} linhas · {1} caracteres" + title: Limpador de espaços em branco + description: "Saída limpa do terminal e do código Claude: remoção de números de + linha, códigos ANSI, diagramas de caixa, marcadores de ponto, marcadores + de diferença e espaços em branco extras." + externalAccess: nulo + cli-banner-generator: + title: Gerador de banners CLI + description: Gere banners ASCII e Mensagens do Dia (MOTD) para seus aplicativos + de linha de comando, terminal ou roteador. + externalAccess: nulo + texts: + label-border-char: "Caractere de borda:" + placeholder-: "#" + label-width-min-20-max-200: "Largura (mín. 20 – máx. 200):" + label-banner-text: "Texto do banner:" + placeholder-enter-motd-banner-text-here: Insira aqui o texto do banner MOTD... + title-generated-banner: Banner gerado spanCopyable: copy: Copiar para a área de transferência copied: Copiado! @@ -10278,3 +10424,43 @@ collapsibleToolMenu: collapsing: Desabando... collapse-all-tools: Recolher todas as ferramentas expand-all-tools: Expandir todas as ferramentas +analogSignalConverter: + texts: + title-input: Entrada + title-parameters: Parâmetros + title-output: Saída + swap-direction: Inverter direção + status-ok: Dentro do alcance + copy-output: Copie o valor de saída. + title-reference-points: Pontos de referência + label-signal-type: Tipo de sinal + preset-custom: Personalizado + label-engineering-range: Engenharia mín./máx. + label-engineering-unit: Unidade de engenharia + placeholder-unit: Unidade + error-signal-range: O sinal mínimo deve ser menor que o sinal máximo. + error-engineering-range: O valor mínimo de engenharia deve ser inferior ao valor + máximo de engenharia. + label-engineering-value: Valor da engenharia + label-rounded-signal: Arredondado (inteiro) + status-below-range: O sinal está abaixo do alcance. + status-above-range: O sinal está acima do alcance. + status-below-live-zero: O sinal está abaixo do zero de referência; verifique se + há algum fio rompido ou sensor com defeito. + engineering-below-range: O valor está abaixo da faixa de engenharia, o sinal estará fora da faixa. + engineering-above-range: O valor está acima da faixa de engenharia, o sinal estará fora da faixa. + loop-status-failure-low: "Baixa taxa de falha (≤ 3,6 mA, NAMUR NE 43): circuito + interrompido, transmissor sem energia ou com defeito." + loop-status-uncertain-low: "Entre 3,6 e 3,8 mA: zona indefinida, é provável que + ocorra uma falha (NAMUR NE 43)." + loop-status-under-range: "Subfaixa (3,8 a 4 mA): a medição fica saturada no + limite inferior da faixa." + loop-status-over-range: "Sobrecarga (20 a 20,5 mA): a medição satura no limite superior da faixa." + loop-status-uncertain-high: "Entre 20,5 e 21 mA: zona indefinida, é provável que + ocorra uma falha (NAMUR NE 43)." + loop-status-failure-high: "Falha alta (≥ 21 mA, NAMUR NE 43): transmissor + defeituoso ou curto-circuito." + label-formula: Fórmula + formula-value: valor + formula-signal: sinal + column-percent: Faixa diff --git a/locales/ru.yml b/locales/ru.yml index 81c800c4..c2fccb6f 100644 --- a/locales/ru.yml +++ b/locales/ru.yml @@ -182,6 +182,7 @@ tools: finance: Финансы default: По умолчанию toml: ТОМЛ + automation: Автоматизация password-strength-analyser: title: Анализатор надежности пароля description: Узнайте о надежности своего пароля с помощью этого анализатора @@ -5543,6 +5544,7 @@ tools: label-permanent: Постоянный title-generated-fw-command: "Сгенерированная команда fw:" tag-const-zone-ref: константная зона = ссылка + tooltip-remove: Удалить из этого списка title: генератор командной строки firewalld description: Сгенерировать командную строку firewalld fortune-wheel: @@ -5562,6 +5564,11 @@ tools: Пока не добавлено ни одного варианта. Добавьте несколько вариантов, чтобы начать вращение! tag-: ✕ + wheel-options-wheeloptions-length: Варианты колес ({0}) + spinning: Вращение... + spin-to-win: Крутите педали и выигрывайте! + spin-the-wheel: Покрутите колесо! + checkbox-remove-winner-after-spin: Удалить победителя после вращения fstab-generator: title: Генератор FStab description: Сгенерировать строку /etc/fstab @@ -9312,6 +9319,11 @@ tools: label-azerty: АЗЕРТИ label-dvorak: ДВОРАКА label-colemak: КОЛЕМАК + title: Тестер клавиатуры + description: Проверьте работу клавиш клавиатуры и убедитесь, что все они + исправны. Визуальная обратная связь при каждом нажатии клавиши, поддержка + различных раскладок клавиатуры. + externalAccess: нулевой markdown-to-data: texts: label-paste-your-markdown-content: "Вставьте содержимое в формате Markdown:" @@ -9907,6 +9919,10 @@ tools: tag-copy-json-paths: Скопировать пути JSON tag-generate-patch: Сгенерировать патч tag-apply-patch: Применить патч + title: JSON Patch Tester + description: Простой инструмент для создания и тестирования JSON-патчей в + соответствии с RFC 6902. А также для вывода путей к JSON-объекту. + externalAccess: нулевой ping: title: Пинг description: Проверьте доступность набора имен хостов, IP-адресов, CIDR или @@ -10247,6 +10263,136 @@ tools: description: Проверьте работу колонок и наушников, воспроизведя тестовые звуки. Отрегулируйте громкость и проверьте чистоту звука. externalAccess: нулевой + current-loop-4-20ma-converter: + title: Преобразователь 4-20 мА + description: С помощью диагностической петли NAMUR NE 43 вы можете преобразовать + ток 4-20 мА (или 0-20 мА) в инженерное значение и обратно. + texts: + signal-label: Текущий + label-4-20-ma: 4-20 мА + label-0-20-ma: 0-20 мА + voltage-0-10v-converter: + title: Преобразователь 0-10 В + description: Преобразуйте напряжение 0-10 В, 2-10 В, 0-5 В, 1-5 В или ±10 В в + инженерное значение и обратно. + texts: + signal-label: Напряжение + label-0-10-v: 0-10 В + label-2-10-v: 2-10 В + label-0-5-v: 0-5 В + label-1-5-v: 1-5 В + label-10-v: ±10 В + analog-scaling-calculator: + title: Аналоговый масштабный калькулятор + description: Преобразовать исходное аналоговое значение ПЛК (Siemens 0-27648, + Schneider 0-10000, 12/15/16 бит...) в инженерное значение и обратно. + texts: + signal-label: Сырое значение + preset-siemens-unipolar: Siemens S7 однополярный (от 0 до 27648) + preset-siemens-bipolar: Siemens S7 биполярный (-27648 до 27648) + preset-schneider: Schneider M340/M580 (от 0 до 10000) + preset-12-bits: 12 бит (от 0 до 4095) + preset-15-bits: 15 бит (от 0 до 32767) + preset-16-bits: 16 бит (от 0 до 65535) + paste-image: + texts: + copy-image: Скопировать изображение + copy-as-base64: Скопировать в формате base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Ваш браузер не может закодировать {0}. Изображение загружается как {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Вывод: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Оригинал: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Очистить все + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} вставлено в эту сессию" + quality: "{0}%" + paste-from-clipboard: Вставить из буфера обмена + the-image-stays-in-your-browser-nothing-is-uploaded: Изображение остаётся в вашем браузере. Ничего не загружается. + anywhere-on-this-page-to-paste-an-image: Вставьте изображение в любое место на этой странице. + press: Нажимать + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: + Браузеру не удалось скопировать URL-адрес данных в формате base64 в + буфер обмена. + base64-data-url-copied-to-the-clipboard: URL-адрес данных Base64 скопирован в буфер обмена. + the-browser-could-not-copy-the-image-to-the-clipboard: Браузеру не удалось скопировать изображение в буфер обмена. + image-copied-to-the-clipboard: Изображение скопировано в буфер обмена + the-browser-could-not-read-the-clipboard: Браузер не смог прочитать содержимое буфера обмена. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Браузер заблокировал доступ к буферу обмена. Разрешите его в настройках + сайта или нажмите {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Ваш браузер не может считывать изображения из буфера обмена с помощью + кнопки. Вместо этого нажмите {0}. + the-browser-could-not-read-the-pasted-image: Браузер не смог прочитать вставленное изображение. + the-browser-could-not-convert-the-image: Браузеру не удалось преобразовать изображение. + the-clipboard-has-no-image-copy-an-image-then-try-again: В буфере обмена нет + изображения. Скопируйте изображение и попробуйте снова. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Вставить изображение + description: Вставьте изображение из буфера обмена, преобразуйте его в формат + PNG, JPEG или WebP и скачайте. + externalAccess: нулевой + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Преобразовать CRLF → LF + lf-endings: Окончания LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Обрезка строк по левому краю и объединение абзацев для Reddit, + Discord, Slack + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Соедините абзацы с переносом строк. + smart-unwrap: Умная распаковка + strip-from-patches: Удалить + - {'@'}{'@'} из патчей + diff-markers: Дифференциальные маркеры + remove-common-leading-indent: Удалите общий начальный отступ + indent: Отступ + collapse-2-blank-lines-into-1: Объединить 2+ пустые строки в 1 + blank-lines: Пустые строки + remove-end-of-line-whitespace: Удалите пробелы в конце строки. + trailing-space: Пространство для прицепа + strip-prefixes: Удалите префиксы ●, ○, ⏺ + bullet-markers: Маркеры-пули + remove-characters: Удалить символы ─ │ └ ┐ + box-drawing: Рисунок коробки + strip-color-escape-sequences: Последовательности выхода цвета полоски + ansi-codes: коды ANSI + strip-1-2-1-t-prefixes: Strip 1│, 2│, 1\\t prefixes + line-numbers: Номера строк + texts: + cleaning-options: Варианты уборки + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Здесь отобразится очищенный результат. + paste-fragmented-claude-code-output-here: Вставьте сюда фрагментированный код Claude… + sample: Образец + paste: Вставить + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Копирование не + удалось. Выбранный фрагмент выделен. Нажмите Ctrl+C для копирования. + copied-to-the-clipboard: Скопировано в буфер обмена. + the-clipboard-api-is-unavailable: API буфера обмена недоступен. + copy-failed: Копирование не удалось + copied: Скопировано ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} строк · {1} символов · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} строк · {1} символов" + title: Очиститель пустого пространства + description: "Чистый вывод терминала и кода Клода: номера строк, коды ANSI, + схематическое изображение прямоугольника, маркеры маркеров, маркеры + различий и лишние пробелы." + externalAccess: нулевой + cli-banner-generator: + title: Генератор баннеров CLI + description: Создавайте ASCII-баннеры и сообщения дня (MOTD) для ваших + приложений командной строки, терминала или маршрутизатора. + externalAccess: нулевой + texts: + label-border-char: "Пограничный Чар:" + placeholder-: "#" + label-width-min-20-max-200: "Ширина (мин. 20 – макс. 200):" + label-banner-text: "Текст баннера:" + placeholder-enter-motd-banner-text-here: Введите текст баннера дня здесь... + title-generated-banner: Сгенерированный баннер spanCopyable: copy: Копировать в буфер обмена copied: Скопировано! @@ -10271,3 +10417,47 @@ collapsibleToolMenu: collapsing: Обрушение... collapse-all-tools: Свернуть все инструменты expand-all-tools: Развернуть все инструменты +analogSignalConverter: + texts: + title-input: Вход + title-parameters: Параметры + title-output: Выход + swap-direction: Поменять направление + status-ok: В пределах досягаемости + copy-output: Скопируйте выходное значение + title-reference-points: Точки отсчета + label-signal-type: Тип сигнала + preset-custom: Обычай + label-engineering-range: Инженерные минимальные/максимальные значения + label-engineering-unit: Инженерное подразделение + placeholder-unit: Единица + error-signal-range: Минимальное значение сигнала должно быть ниже максимального + значения сигнала. + error-engineering-range: Минимальное значение инженерных требований должно быть + ниже максимального значения инженерных требований. + label-engineering-value: Инженерная ценность + label-rounded-signal: Округленный (целое число) + status-below-range: Сигнал находится ниже допустимого диапазона. + status-above-range: Сигнал находится выше допустимого диапазона. + status-below-live-zero: Сигнал ниже нулевого значения, проверьте наличие обрыва + провода или неисправности датчика. + engineering-below-range: Значение ниже допустимого диапазона, сигнал выйдет за + пределы допустимой зоны. + engineering-above-range: Значение превышает допустимый диапазон, сигнал выйдет + за пределы допустимой зоны. + loop-status-failure-low: "Низкий уровень отказов (≤ 3,6 мА, NAMUR NE 43): обрыв + шлейфа, отсутствие питания или неисправность передатчика." + loop-status-uncertain-low: "В диапазоне от 3,6 до 3,8 мА: неопределенная зона, + вероятен сбой (NAMUR NE 43)." + loop-status-under-range: "В нижней части диапазона (от 3,8 до 4 мА): измерение + насыщается в нижней точке диапазона." + loop-status-over-range: "Выход за пределы диапазона (20–20,5 мА): измерение + насыщается в верхней части диапазона." + loop-status-uncertain-high: "В диапазоне от 20,5 до 21 мА: неопределенная зона, + вероятен сбой (NAMUR NE 43)." + loop-status-failure-high: "Высокий уровень отказов (≥ 21 мА, NAMUR NE 43): + неисправный передатчик или короткое замыкание." + label-formula: Формула + formula-value: ценить + formula-signal: сигнал + column-percent: Диапазон diff --git a/locales/tr.yml b/locales/tr.yml index 24b86f0e..01fc5433 100644 --- a/locales/tr.yml +++ b/locales/tr.yml @@ -127,6 +127,7 @@ tools: finance: Finans default: Varsayılan toml: TOML + automation: Otomasyon password-strength-analyser: title: Şifre gücü analizi description: Şifrenin ne kadar güçlü olduğunu bu araçla birlikte analiz et ve @@ -4577,6 +4578,7 @@ tools: label-permanent: Kalıcı title-generated-fw-command: "Oluşturulan fw komutu:" tag-const-zone-ref: sabit bölge = ref + tooltip-remove: Bu listeden kaldır title: firewalld komut satırı oluşturucu description: firewalld komut satırlarını oluşturun fortune-wheel: @@ -4594,6 +4596,11 @@ tools: tag-clear-all-options: Tüm Seçenekleri Temizle tag-no-options-added-yet-add-some-options-to-start-spinning: Henüz seçenek eklenmedi. Dönmeye başlamak için birkaç seçenek ekleyin! tag-: ✕ + wheel-options-wheeloptions-length: Tekerlek Seçenekleri ({0}) + spinning: Dönüyor... + spin-to-win: Döndür ve Kazan! + spin-the-wheel: Çarkı Çevir! + checkbox-remove-winner-after-spin: Döndürme işleminden sonra kazananı kaldırın. fstab-generator: title: FStab Jeneratörü description: /etc/fstab satırını oluşturun @@ -9264,6 +9271,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Klavye Test Cihazı + description: Klavyenizin tuşlarını test edin ve tüm tuşların düzgün çalışıp + çalışmadığını kontrol edin. Farklı klavye düzenleri desteğiyle her tuş + basımı için görsel geri bildirim. + externalAccess: hükümsüz markdown-to-data: texts: label-paste-your-markdown-content: "Markdown içeriğinizi yapıştırın:" @@ -9856,6 +9868,10 @@ tools: tag-copy-json-paths: JSON yollarını kopyala tag-generate-patch: Yama oluştur tag-apply-patch: Yama uygulayın + title: JSON Yama Test Cihazı + description: RFC 6902'ye göre JSON yamaları oluşturmak ve test etmek için basit + bir araç. Ayrıca bir JSON nesnesinin yollarını listeler. + externalAccess: hükümsüz ping: title: Ping description: Bir dizi ana bilgisayar adını, IP adresini, CIDR'yi veya IP @@ -10194,6 +10210,134 @@ tools: description: Hoparlörlerinizi ve kulaklıklarınızı test etmek için test sesleri çalın. Ses seviyesini ayarlayın ve ses netliğini kontrol edin. externalAccess: hükümsüz + current-loop-4-20ma-converter: + title: 4-20 mA dönüştürücü + description: NAMUR NE 43 döngü teşhis cihazı ile 4-20 mA (veya 0-20 mA) akımını + mühendislik değerine dönüştürün ve tekrar eski haline getirin. + texts: + signal-label: Akım + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: 0-10 V dönüştürücü + description: 0-10 V, 2-10 V, 0-5 V, 1-5 V veya ±10 V gerilimini mühendislik + değerine dönüştürün ve tekrar eski haline getirin. + texts: + signal-label: Gerilim + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Analog ölçekleme hesap makinesi + description: Ham PLC analog değerini (Siemens 0-27648, Schneider 0-10000, + 12/15/16 bit...) mühendislik değerine dönüştürün ve tekrar eski haline + getirin. + texts: + signal-label: Ham değer + preset-siemens-unipolar: Siemens S7 tek kutuplu (0 - 27648) + preset-siemens-bipolar: Siemens S7 bipolar (-27648 - 27648) + preset-schneider: Schneider M340/M580 (0 - 10000) + preset-12-bits: 12 bit (0 ila 4095) + preset-15-bits: 15 bit (0 ila 32767) + preset-16-bits: 16 bit (0 ila 65535) + paste-image: + texts: + copy-image: Resmi kopyala + copy-as-base64: Base64 olarak kopyala + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Tarayıcınız {0} karakterini kodlayamıyor. Görüntü {1} olarak indiriliyor. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Çıktı: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Orijinal: {0}, {1}" + image-width-image-height-px: "{0} × {1} piksel" + clear-all: Tümünü temizle + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} bu oturuma yapıştırıldı" + quality: "{0}%" + paste-from-clipboard: Panodan yapıştır + the-image-stays-in-your-browser-nothing-is-uploaded: Görüntü tarayıcınızda kalır. Hiçbir şey yüklenmez. + anywhere-on-this-page-to-paste-an-image: Bu sayfada herhangi bir yere resim yapıştırabilirsiniz. + press: Basmak + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: Tarayıcı, base64 veri URL'sini panoya kopyalayamadı. + base64-data-url-copied-to-the-clipboard: Base64 veri URL'si panoya kopyalandı + the-browser-could-not-copy-the-image-to-the-clipboard: Tarayıcı görüntüyü panoya kopyalayamadı. + image-copied-to-the-clipboard: Görüntü panoya kopyalandı + the-browser-could-not-read-the-clipboard: Tarayıcı panoyu okuyamadı. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Tarayıcı panoya erişimi engelledi. Site ayarlarından izin verin veya {0} + tuşuna basın. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Tarayıcınız, düğme aracılığıyla panodan resim okuyamaz. Bunun yerine {0} + tuşuna basın. + the-browser-could-not-read-the-pasted-image: Tarayıcı yapıştırılan resmi okuyamadı. + the-browser-could-not-convert-the-image: Tarayıcı görüntüyü dönüştüremedi. + the-clipboard-has-no-image-copy-an-image-then-try-again: Panoda resim yok. Bir resim kopyalayın, sonra tekrar deneyin. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Resmi Yapıştır + description: Panodan bir görsel yapıştırın, PNG, JPEG veya WebP formatına + dönüştürün ve indirin. + externalAccess: hükümsüz + whitespace-cleaner: + options: + texts: + convert-crlf-lf: CRLF'yi LF'ye dönüştür + lf-endings: LF sonları + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Reddit, Discord ve Slack için satırları sola hizalayın ve paragrafları + birleştirin. + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Yumuşak dokulu paragrafları birleştirin + smart-unwrap: Akıllı açma + strip-from-patches: Yamalardan + - {'@'}{'@'} işaretini kaldırın. + diff-markers: Farklı işaretleyiciler + remove-common-leading-indent: Ortak öndeki girintiyi kaldır + indent: Girinti + collapse-2-blank-lines-into-1: 2 veya daha fazla boş satırı 1'e daraltın + blank-lines: Boş satırlar + remove-end-of-line-whitespace: Satır sonundaki boşlukları kaldırın. + trailing-space: Arkadaki boşluk + strip-prefixes: ●, ○, ⏺ öneklerini kaldırın + bullet-markers: Madde işaretleyicileri + remove-characters: ─ │ └ ┐ karakterleri kaldır + box-drawing: Kutu çizimi + strip-color-escape-sequences: Şerit renk kaçış dizileri + ansi-codes: ANSI kodları + strip-1-2-1-t-prefixes: 1│, 2│, 1\\t öneklerini kaldırın + line-numbers: Satır numaraları + texts: + cleaning-options: Temizlik seçenekleri + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Temizlenmiş çıktınız burada görünecektir. + paste-fragmented-claude-code-output-here: Parçalanmış Claude Code çıktısını buraya yapıştırın… + sample: Örnek + paste: Yapıştır + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Kopyalama başarısız + oldu. Çıktı seçildi. Kopyalamak için Ctrl+C tuşlarına basın. + copied-to-the-clipboard: Panoya kopyalandı. + the-clipboard-api-is-unavailable: Pano API'si kullanılamıyor. + copy-failed: Kopyalama başarısız oldu + copied: Kopyalandı ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} satır · {1} karakter · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} satır · {1} karakter" + title: Boşluk Temizleyici + description: "Terminal ve Claude Code çıktısını temizleyin: satır numaralarını, + ANSI kodlarını, kutu çizimlerini, madde işaretlerini, fark işaretlerini ve + gereksiz boşlukları kaldırın." + externalAccess: hükümsüz + cli-banner-generator: + title: CLI Banner Oluşturucu + description: CLI uygulamalarınız, terminaliniz veya yönlendiriciniz için ASCII + başlıklar ve Günün Mesajı (MOTD) oluşturun. + externalAccess: hükümsüz + texts: + label-border-char: "Sınır Karakteri:" + placeholder-: "#" + label-width-min-20-max-200: "Genişlik (Minimum 20 – Maksimum 200):" + label-banner-text: "Banner Metni:" + placeholder-enter-motd-banner-text-here: MOTD (Günün Mesajı) başlık metnini buraya girin... + title-generated-banner: Oluşturulan Afiş about: alltools-title: Tüm {toolsCount} Araç tools: @@ -10273,3 +10417,42 @@ collapsibleToolMenu: collapsing: Çöküyor... collapse-all-tools: Tüm Araçları Daralt expand-all-tools: Tüm Araçları Genişlet +analogSignalConverter: + texts: + title-input: Giriş + title-parameters: Parametreler + title-output: Çıktı + swap-direction: Yönü değiştir + status-ok: Menzil içinde + copy-output: Çıktı değerini kopyala + title-reference-points: Referans noktaları + label-signal-type: Sinyal türü + preset-custom: Gelenek + label-engineering-range: Mühendislik minimum/maksimum + label-engineering-unit: Mühendislik birimi + placeholder-unit: Birim + error-signal-range: Sinyal minimum değeri, sinyal maksimum değerinden düşük olmalıdır. + error-engineering-range: Mühendislik minimumu, mühendislik maksimumundan düşük olmalıdır. + label-engineering-value: Mühendislik değeri + label-rounded-signal: Yuvarlanmış (tam sayı) + status-below-range: Sinyal aralığın altında. + status-above-range: Sinyal aralığın üzerinde. + status-below-live-zero: Sinyal canlı sıfır noktasının altında, kopuk bir kablo + veya arızalı bir sensör olup olmadığını kontrol edin. + engineering-below-range: Değer mühendislik aralığının altında, sinyal aralık dışında kalacak. + engineering-above-range: Değer mühendislik aralığının üzerinde, sinyal aralık dışında olacaktır. + loop-status-failure-low: "Düşük arıza (≤ 3,6 mA, NAMUR NE 43): kopuk devre, + güçsüz veya arızalı verici." + loop-status-uncertain-low: "3,6 ile 3,8 mA arası: tanımlanmamış bölge, arıza + olasılığı yüksek (NAMUR NE 43)." + loop-status-under-range: "Ölçüm aralığının alt sınırında (3,8 ila 4 mA): ölçüm doygunluğa ulaşır." + loop-status-over-range: "Aşırı aralık (20 ila 20,5 mA): Ölçüm, aralığın üst + kısmında doyuma ulaşır." + loop-status-uncertain-high: "20,5 ile 21 mA arası: tanımlanmamış bölge, arıza + olasılığı yüksek (NAMUR NE 43)." + loop-status-failure-high: "Yüksek akım arızası (≥ 21 mA, NAMUR NE 43): Arızalı + verici veya kısa devre." + label-formula: Formül + formula-value: değer + formula-signal: sinyal + column-percent: Menzil diff --git a/locales/uk.yml b/locales/uk.yml index db116a32..0834db96 100644 --- a/locales/uk.yml +++ b/locales/uk.yml @@ -180,6 +180,7 @@ tools: finance: Фінанси default: За замовчуванням toml: TOML + automation: Автоматизація password-strength-analyser: title: Аналізатор надійності пароля description: Дізнайтеся про надійність свого пароля за допомогою цього @@ -5512,6 +5513,7 @@ tools: label-permanent: Постійний title-generated-fw-command: "Згенерована команда fw:" tag-const-zone-ref: константна зона = посилання + tooltip-remove: Видалити з цього списку title: Генератор командного рядка firewalld description: Генерація командних рядків firewalld fortune-wheel: @@ -5531,6 +5533,11 @@ tools: Поки що не додано жодних опцій. Додайте кілька опцій, щоб почати обертатися! tag-: ✕ + wheel-options-wheeloptions-length: Варіанти коліс ({0}) + spinning: Крутиться... + spin-to-win: Обертайте, щоб виграти! + spin-the-wheel: Крути колесо! + checkbox-remove-winner-after-spin: Видалити переможця після обертання fstab-generator: title: Генератор FStab description: Згенерувати рядок /etc/fstab @@ -9272,6 +9279,11 @@ tools: label-azerty: АЗЕРТІ label-dvorak: ДВОРЖАК label-colemak: КОЛЕМАК + title: Тестер клавіатури + description: Перевірте клавіші клавіатури та перевірте, чи всі вони працюють + належним чином. Візуальний зворотний зв'язок для кожного натискання + клавіші з підтримкою різних розкладок клавіатури. + externalAccess: нульовий markdown-to-data: texts: label-paste-your-markdown-content: "Вставте вміст Markdown:" @@ -9859,6 +9871,10 @@ tools: tag-copy-json-paths: Копіювати шляхи JSON tag-generate-patch: Згенерувати патч tag-apply-patch: Нанести патч + title: Тестер патчів Json + description: Простий інструмент для створення та тестування JSON-патчів + відповідно до RFC 6902. А також перелік шляхів до JSON-об'єкта. + externalAccess: нульовий ping: title: Пінг description: Здійснити ping набору імен хостів, IP-адрес, CIDR або діапазону IP-адрес @@ -10191,6 +10207,134 @@ tools: description: Перевірте свої динаміки та навушники, відтворивши тестові звуки. Відрегулюйте гучність та перевірте чіткість звуку. externalAccess: нульовий + current-loop-4-20ma-converter: + title: Перетворювач 4-20 мА + description: Перетворюйте струм 4-20 мА (або 0-20 мА) на інженерне значення та + навпаки за допомогою діагностики петлі NAMUR NE 43. + texts: + signal-label: Поточний + label-4-20-ma: 4-20 мА + label-0-20-ma: 0-20 мА + voltage-0-10v-converter: + title: Перетворювач 0-10 В + description: Перетворити напругу 0-10 В, 2-10 В, 0-5 В, 1-5 В або ±10 В на + інженерне значення та навпаки. + texts: + signal-label: Напруга + label-0-10-v: 0-10 В + label-2-10-v: 2-10 В + label-0-5-v: 0-5 В + label-1-5-v: 1-5 В + label-10-v: ±10 В + analog-scaling-calculator: + title: Аналоговий калькулятор масштабування + description: Масштабувати необроблене аналогове значення ПЛК (Siemens 0-27648, + Schneider 0-10000, 12/15/16 біт...) в інженерне значення і назад. + texts: + signal-label: Сира вартість + preset-siemens-unipolar: Siemens S7 однополярний (від 0 до 27648) + preset-siemens-bipolar: Siemens S7 біполярний (від -27648 до 27648) + preset-schneider: Шнайдер M340/M580 (від 0 до 10000) + preset-12-bits: 12 біт (від 0 до 4095) + preset-15-bits: 15 біт (від 0 до 32767) + preset-16-bits: 16 біт (від 0 до 65535) + paste-image: + texts: + copy-image: Копіювати зображення + copy-as-base64: Копіювати як base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: Ваш браузер не може закодувати {0}. Зображення завантажується як {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Вихід: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Оригінал: {0}, {1}" + image-width-image-height-px: "{0} × {1} пікселів" + clear-all: Очистити все + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} вставлено в цьому сеансі" + quality: "{0}%" + paste-from-clipboard: Вставити з буфера обміну + the-image-stays-in-your-browser-nothing-is-uploaded: Зображення залишається у вашому браузері. Нічого не завантажується. + anywhere-on-this-page-to-paste-an-image: будь-де на цій сторінці, щоб вставити зображення. + press: Преса + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: Браузеру не вдалося скопіювати URL-адресу даних base64 у буфер обміну. + base64-data-url-copied-to-the-clipboard: URL-адресу даних Base64 скопійовано в буфер обміну + the-browser-could-not-copy-the-image-to-the-clipboard: Браузеру не вдалося скопіювати зображення в буфер обміну. + image-copied-to-the-clipboard: Зображення скопійовано в буфер обміну + the-browser-could-not-read-the-clipboard: Браузер не зміг прочитати буфер обміну. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Браузер заблокував доступ до буфера обміну. Дозвольте його в + налаштуваннях сайту або натисніть {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Ваш браузер не може читати зображення з буфера обміну за допомогою + кнопки. Натисніть {0}. + the-browser-could-not-read-the-pasted-image: Браузер не зміг прочитати вставлене зображення. + the-browser-could-not-convert-the-image: Браузеру не вдалося конвертувати зображення. + the-clipboard-has-no-image-copy-an-image-then-try-again: У буфері обміну немає + зображення. Скопіюйте зображення та спробуйте ще раз. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Вставити зображення + description: Вставте зображення з буфера обміну, конвертуйте його у формат PNG, + JPEG або WebP та завантажте. + externalAccess: нульовий + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Конвертувати CRLF → LF + lf-endings: LF закінчення + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: + Обрізання рядків зліва та повторне з'єднання абзаців для Reddit, + Discord, Slack + markdown-reddit: Маркдаун / Reddit + join-soft-wrapped-paragraphs: Об'єднання абзаців з м'яким перенесенням + smart-unwrap: Розумне розгортання + strip-from-patches: Зняти + - {'@'}{'@'} з латок + diff-markers: Маркери різниць + remove-common-leading-indent: Видалити спільний початковий відступ + indent: Відступ + collapse-2-blank-lines-into-1: Згорнути 2+ порожні рядки в 1 + blank-lines: Порожні рядки + remove-end-of-line-whitespace: Видалити пробіли в кінці рядка + trailing-space: Кінцевий пробіл + strip-prefixes: Префікси Strip ●, ○, ⏺ + bullet-markers: Маркери + remove-characters: Видалити символи ─ │ └ ┐ + box-drawing: Креслення коробки + strip-color-escape-sequences: Ескейп-послідовності кольору смуги + ansi-codes: Коди ANSI + strip-1-2-1-t-prefixes: Видалити префікси 1│, 2│, 1\t + line-numbers: Номери рядків + texts: + cleaning-options: Варіанти чищення + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Ваш очищений вивід з’явиться тут. + paste-fragmented-claude-code-output-here: Вставте сюди фрагментований вивід коду Клода… + sample: Зразок + paste: Вставити + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Не вдалося + скопіювати. Вихідні дані вибрано. Натисніть Ctrl+C, щоб скопіювати їх. + copied-to-the-clipboard: Скопійовано в буфер обміну. + the-clipboard-api-is-unavailable: API буфера обміну недоступний. + copy-failed: Не вдалося скопіювати + copied: Скопійовано ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} рядків · {1} символів · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} рядків · {1} символів" + title: Очищувач пробілу + description: "Чистий вивід терміналу та коду Клода: номери ліній смуг, коди + ANSI, малювання блоків, марковані списки, маркери різниці та додаткові + пробіли." + externalAccess: нульовий + cli-banner-generator: + title: Генератор банерів CLI + description: Генеруйте ASCII-банери, повідомлення дня (MOTD) для ваших + CLI-додатків, терміналу або маршрутизатора. + externalAccess: нульовий + texts: + label-border-char: "Прикордонний символ:" + placeholder-: "#" + label-width-min-20-max-200: "Ширина (мін. 20 – макс. 200):" + label-banner-text: "Текст банера:" + placeholder-enter-motd-banner-text-here: Введіть тут текст банера MOTD... + title-generated-banner: Згенерований банер spanCopyable: copy: Копіювати в буфер обміну copied: Скопійовано! @@ -10215,3 +10359,43 @@ collapsibleToolMenu: collapsing: Згортання... collapse-all-tools: Згорнути всі інструменти expand-all-tools: Розгорнути всі інструменти +analogSignalConverter: + texts: + title-input: Вхід + title-parameters: Параметри + title-output: Вихід + swap-direction: Змінити напрямок + status-ok: У межах досяжності + copy-output: Скопіюйте вихідне значення + title-reference-points: Опорні точки + label-signal-type: Тип сигналу + preset-custom: Користувацька + label-engineering-range: Інженерні мін. / макс. + label-engineering-unit: Інженерний підрозділ + placeholder-unit: Одиниця + error-signal-range: Мінімальний сигнал має бути нижчим за максимальний сигнал. + error-engineering-range: Інженерний мінімум має бути нижчим за інженерний максимум. + label-engineering-value: Інженерне значення + label-rounded-signal: Округлене (ціле число) + status-below-range: Сигнал нижче допустимого діапазону. + status-above-range: Сигнал перевищує допустимий діапазон. + status-below-live-zero: Сигнал нижче фазного нуля, перевірте наявність обриву + дроту або несправного датчика. + engineering-below-range: Якщо значення нижче інженерного діапазону, сигнал буде + поза межами діапазону. + engineering-above-range: Якщо значення перевищує інженерний діапазон, сигнал + буде поза межами діапазону. + loop-status-failure-low: "Низький рівень збою (≤ 3,6 мА, NAMUR NE 43): обрив + петлі, вимкнений або несправний передавач." + loop-status-uncertain-low: "Між 3,6 та 3,8 мА: невизначена зона, ймовірна несправність (NAMUR NE 43)." + loop-status-under-range: "Нижче діапазону (3,8–4 мА): вимірювання насичується в + нижній частині діапазону." + loop-status-over-range: "Вихід за межі діапазону (від 20 до 20,5 мА): + вимірювання насичується у верхній частині діапазону." + loop-status-uncertain-high: "Між 20,5 та 21 мА: невизначена зона, ймовірна несправність (NAMUR NE 43)." + loop-status-failure-high: "Високий рівень збою (≥ 21 мА, NAMUR NE 43): + несправний передавач або коротке замикання." + label-formula: Формула + formula-value: значення + formula-signal: сигнал + column-percent: Діапазон diff --git a/locales/vi.yml b/locales/vi.yml index 35376e8c..8d033935 100644 --- a/locales/vi.yml +++ b/locales/vi.yml @@ -178,6 +178,7 @@ tools: finance: Tài chính default: Mặc định toml: TOML + automation: Tự động hóa password-strength-analyser: title: Bộ phân tích độ mạnh mật khẩu description: Khám phá độ mạnh của mật khẩu của bạn với công cụ phân tích độ mạnh @@ -4850,6 +4851,7 @@ tools: label-permanent: Vĩnh viễn title-generated-fw-command: "Đã tạo lệnh fw:" tag-const-zone-ref: vùng hằng số = tham chiếu + tooltip-remove: Xóa khỏi danh sách này title: trình tạo dòng lệnh firewalld description: Tạo các dòng lệnh firewalld fortune-wheel: @@ -4869,6 +4871,11 @@ tools: Chưa có tùy chọn nào được thêm vào. Hãy thêm một số tùy chọn để bắt đầu quay! tag-: ✕ + wheel-options-wheeloptions-length: Tùy chọn bánh xe ({0}) + spinning: Đang quay... + spin-to-win: Quay để trúng thưởng! + spin-the-wheel: Quay bánh xe may mắn! + checkbox-remove-winner-after-spin: Loại bỏ người thắng cuộc sau khi quay fstab-generator: title: Trình tạo FStab description: Tạo dòng /etc/fstab @@ -9235,6 +9242,11 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: Kiểm tra bàn phím + description: Kiểm tra các phím trên bàn phím của bạn và đảm bảo tất cả các phím + hoạt động bình thường. Hiển thị phản hồi trực quan cho mỗi lần nhấn phím, + hỗ trợ nhiều bố cục bàn phím khác nhau. + externalAccess: vô giá trị markdown-to-data: texts: label-paste-your-markdown-content: "Dán nội dung Markdown của bạn vào đây:" @@ -9824,6 +9836,10 @@ tools: tag-copy-json-paths: Sao chép đường dẫn JSON tag-generate-patch: Tạo bản vá tag-apply-patch: Áp dụng miếng vá + title: Trình kiểm thử bản vá Json + description: Một công cụ đơn giản để tạo và kiểm tra các bản vá JSON theo RFC + 6902. Và liệt kê các đường dẫn của một đối tượng JSON. + externalAccess: vô giá trị ping: title: Ping description: Ping một tập hợp các tên máy chủ, địa chỉ IP, CIDR hoặc dải địa chỉ IP. @@ -10160,6 +10176,133 @@ tools: description: Kiểm tra loa và tai nghe bằng cách phát thử âm thanh. Điều chỉnh âm lượng và kiểm tra độ rõ nét của âm thanh. externalAccess: vô giá trị + current-loop-4-20ma-converter: + title: Bộ chuyển đổi 4-20 mA + description: Chuyển đổi dòng điện 4-20 mA (hoặc 0-20 mA) thành giá trị kỹ thuật + và ngược lại bằng chức năng chẩn đoán vòng lặp NAMUR NE 43. + texts: + signal-label: Hiện hành + label-4-20-ma: 4-20 mA + label-0-20-ma: 0-20 mA + voltage-0-10v-converter: + title: Bộ chuyển đổi 0-10 V + description: Chuyển đổi điện áp 0-10 V, 2-10 V, 0-5 V, 1-5 V hoặc ±10 V thành + giá trị kỹ thuật và ngược lại. + texts: + signal-label: Điện áp + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: Máy tính tỷ lệ tương tự + description: Chuyển đổi giá trị analog thô của PLC (Siemens 0-27648, Schneider + 0-10000, 12/15/16 bit...) thành giá trị kỹ thuật và ngược lại. + texts: + signal-label: Giá trị thô + preset-siemens-unipolar: Siemens S7 đơn cực (0 đến 27648) + preset-siemens-bipolar: Siemens S7 lưỡng cực (-27648 đến 27648) + preset-schneider: Schneider M340/M580 (0 đến 10000) + preset-12-bits: 12 bit (0 đến 4095) + preset-15-bits: 15 bit (0 đến 32767) + preset-16-bits: 16 bit (0 đến 65535) + paste-image: + texts: + copy-image: Sao chép hình ảnh + copy-as-base64: Sao chép dưới dạng base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: + Trình duyệt của bạn không thể mã hóa {0}. Hình ảnh được tải xuống dưới + dạng {1}. + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: "Kết quả đầu ra: {0}, {1}" + original-gettypelabel-image-source-type-formatbytes-image-source-size: "Nguyên bản: {0}, {1}" + image-width-image-height-px: "{0} × {1} px" + clear-all: Xóa tất cả + images-length-images-length-1-image-images-pasted-in-this-session: "{0} {1} được dán trong phiên này" + quality: "{0}%" + paste-from-clipboard: Dán từ clipboard + the-image-stays-in-your-browser-nothing-is-uploaded: Hình ảnh vẫn hiển thị trên + trình duyệt của bạn. Không có gì được tải lên cả. + anywhere-on-this-page-to-paste-an-image: Bạn có thể dán hình ảnh vào bất kỳ vị trí nào trên trang này. + press: Nhấn + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: Trình duyệt không thể sao chép URL dữ liệu base64 vào clipboard. + base64-data-url-copied-to-the-clipboard: URL dữ liệu Base64 đã được sao chép vào clipboard + the-browser-could-not-copy-the-image-to-the-clipboard: Trình duyệt không thể sao chép hình ảnh vào clipboard. + image-copied-to-the-clipboard: Hình ảnh đã được sao chép vào clipboard + the-browser-could-not-read-the-clipboard: Trình duyệt không thể đọc dữ liệu từ clipboard. + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: + Trình duyệt đã chặn quyền truy cập clipboard. Hãy cho phép quyền này + trong cài đặt trang web hoặc nhấn {0}. + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: + Trình duyệt của bạn không thể đọc hình ảnh từ clipboard bằng nút bấm. + Thay vào đó, hãy nhấn {0}. + the-browser-could-not-read-the-pasted-image: Trình duyệt không thể đọc được hình ảnh đã dán. + the-browser-could-not-convert-the-image: Trình duyệt không thể chuyển đổi hình ảnh. + the-clipboard-has-no-image-copy-an-image-then-try-again: Bộ nhớ tạm không có hình ảnh. Hãy sao chép một hình ảnh, rồi thử lại. + ctrl-v: Ctrl + V + v: ⌘ + V + title: Dán hình ảnh + description: Sao chép hình ảnh từ clipboard, chuyển đổi sang định dạng PNG, JPEG + hoặc WebP, rồi tải xuống. + externalAccess: vô giá trị + whitespace-cleaner: + options: + texts: + convert-crlf-lf: Chuyển đổi CRLF → LF + lf-endings: Kết thúc LF + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: Cắt bớt dòng và nối lại đoạn văn cho Reddit, Discord, Slack. + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: Nối các đoạn văn được bao bọc mềm + smart-unwrap: Mở gói thông minh + strip-from-patches: Xóa dấu + - {'@'}{'@'} khỏi các bản vá + diff-markers: Dấu hiệu khác biệt + remove-common-leading-indent: Loại bỏ khoảng thụt lề đầu dòng thông thường + indent: Thụt lề + collapse-2-blank-lines-into-1: Thu gọn 2 dòng trống trở lên thành 1 dòng. + blank-lines: Dòng trống + remove-end-of-line-whitespace: Xóa khoảng trắng cuối dòng + trailing-space: Khoảng trống phía sau + strip-prefixes: Loại bỏ các tiền tố ●, ○, ⏺ + bullet-markers: Dấu hiệu viên đạn + remove-characters: Xóa các ký tự ─ │ └ ┐ + box-drawing: Bản vẽ hộp + strip-color-escape-sequences: Chuỗi thoát màu dải + ansi-codes: Mã ANSI + strip-1-2-1-t-prefixes: Loại bỏ các tiền tố 1│, 2│, 1\\t + line-numbers: Số dòng + texts: + cleaning-options: Các lựa chọn làm sạch + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: Kết quả đã được làm sạch sẽ hiển thị ở đây. + paste-fragmented-claude-code-output-here: Dán đoạn mã Claude Code đã được phân mảnh vào đây… + sample: Vật mẫu + paste: Dán + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: Sao chép thất bại. Đã chọn tệp đầu ra. Nhấn Ctrl+C để sao chép. + copied-to-the-clipboard: Đã sao chép vào clipboard. + the-clipboard-api-is-unavailable: API Clipboard hiện không khả dụng. + copy-failed: Sao chép thất bại + copied: Đã sao chép ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: "{0} dòng · {1} ký tự · −{2}%" + stats-value-inputlines-lines-stats-value-inputchars-chars: "{0} dòng · {1} ký tự" + title: Công cụ dọn dẹp khoảng trắng + description: "Làm sạch đầu ra của thiết bị đầu cuối và mã Claude: loại bỏ số + dòng, mã ANSI, hình vẽ hộp, dấu chấm đầu dòng, dấu khác biệt và khoảng + trắng thừa." + externalAccess: vô giá trị + cli-banner-generator: + title: Công cụ tạo banner CLI + description: Tạo banner ASCII, thông báo trong ngày (MOTD) cho các ứng dụng dòng + lệnh, thiết bị đầu cuối hoặc bộ định tuyến của bạn. + externalAccess: vô giá trị + texts: + label-border-char: "Ký tự viền:" + placeholder-: "#" + label-width-min-20-max-200: "Chiều rộng (Tối thiểu 20 – Tối đa 200):" + label-banner-text: "Văn bản trên biểu ngữ:" + placeholder-enter-motd-banner-text-here: Nhập nội dung banner MOTD vào đây... + title-generated-banner: Biểu ngữ được tạo spanCopyable: copy: Sao chép vào bảng tạm copied: Đã sao chép! @@ -10184,3 +10327,45 @@ collapsibleToolMenu: collapsing: Sụp đổ... collapse-all-tools: Thu gọn tất cả công cụ expand-all-tools: Mở rộng tất cả công cụ +analogSignalConverter: + texts: + title-input: Đầu vào + title-parameters: Thông số + title-output: Đầu ra + swap-direction: Đổi hướng + status-ok: Trong phạm vi + copy-output: Sao chép giá trị đầu ra + title-reference-points: Điểm tham chiếu + label-signal-type: Loại tín hiệu + preset-custom: Phong tục + label-engineering-range: Kỹ thuật tối thiểu/tối đa + label-engineering-unit: Đơn vị kỹ thuật + placeholder-unit: Đơn vị + error-signal-range: Giá trị tín hiệu tối thiểu phải thấp hơn giá trị tín hiệu tối đa. + error-engineering-range: Giá trị tối thiểu trong kỹ thuật phải thấp hơn giá trị + tối đa trong kỹ thuật. + label-engineering-value: Giá trị kỹ thuật + label-rounded-signal: Làm tròn (số nguyên) + status-below-range: Tín hiệu nằm ngoài phạm vi cho phép. + status-above-range: Tín hiệu nằm ngoài phạm vi cho phép. + status-below-live-zero: Tín hiệu thấp hơn mức 0 chuẩn, hãy kiểm tra xem có dây + dẫn bị đứt hoặc cảm biến bị lỗi không. + engineering-below-range: Giá trị này nằm dưới phạm vi kỹ thuật, tín hiệu sẽ bị + lệch khỏi phạm vi cho phép. + engineering-above-range: Giá trị này vượt quá phạm vi kỹ thuật, tín hiệu sẽ nằm + ngoài phạm vi cho phép. + loop-status-failure-low: "Lỗi thấp (≤ 3,6 mA, NAMUR NE 43): mạch bị đứt, không + có nguồn điện hoặc bộ phát bị lỗi." + loop-status-uncertain-low: "Trong khoảng từ 3,6 đến 3,8 mA: vùng không xác định, + có khả năng xảy ra lỗi (NAMUR NE 43)." + loop-status-under-range: "Dưới ngưỡng (3,8 đến 4 mA): phép đo bị bão hòa ở mức + thấp nhất của phạm vi." + loop-status-over-range: "Vượt quá phạm vi (20 đến 20,5 mA): phép đo bị bão hòa ở + mức cao nhất của phạm vi." + loop-status-uncertain-high: "Trong khoảng từ 20,5 đến 21 mA: vùng không xác + định, có khả năng xảy ra lỗi (NAMUR NE 43)." + loop-status-failure-high: "Lỗi cao (≥ 21 mA, NAMUR NE 43): bộ phát bị lỗi hoặc ngắn mạch." + label-formula: Công thức + formula-value: giá trị + formula-signal: tín hiệu + column-percent: Phạm vi diff --git a/locales/zh-TW.yml b/locales/zh-TW.yml index b132b549..9a74cb34 100644 --- a/locales/zh-TW.yml +++ b/locales/zh-TW.yml @@ -4154,6 +4154,7 @@ tools: label-permanent: 永久 title-generated-fw-command: 生成的防火牆命令: tag-const-zone-ref: const zone = ref + tooltip-remove: 從清單中移除 title: firewalld 命令列生成器 description: 生成 firewalld 命令列 fortune-wheel: @@ -4171,6 +4172,11 @@ tools: tag-clear-all-options: 清空所有選項 tag-no-options-added-yet-add-some-options-to-start-spinning: 尚未新增選項,請新增一些選項開始旋轉! tag-: ✕ + wheel-options-wheeloptions-length: 車輪選項({0}) + spinning: 旋轉… + spin-to-win: 旋轉贏大獎! + spin-the-wheel: 轉動輪盤! + checkbox-remove-winner-after-spin: 旋轉結束後移除中獎者 fstab-generator: title: /etc/fstab 生成器 description: 生成 /etc/fstab 行 @@ -4971,6 +4977,7 @@ tools: finance: 金融 default: 預設 toml: TOML + automation: 自動化 websocket-tester: title: WebSocket 測試工具 description: 測試 WebSocket 連線 @@ -8880,6 +8887,9 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: 鍵盤測試器 + description: 測試鍵盤按鍵,檢查所有按鍵是否正常運作。每次按鍵都有視覺回饋,並支援不同的鍵盤佈局。 + externalAccess: 無效的 markdown-to-data: texts: label-paste-your-markdown-content: 貼上您的 Markdown 內容: @@ -9453,6 +9463,9 @@ tools: tag-copy-json-paths: 複製 JSON 路徑 tag-generate-patch: 生成補丁 tag-apply-patch: 應用補丁 + title: JSON 補丁測試器 + description: 一個用於建立和測試符合 RFC 6902 規範的 JSON 修補程式的簡單工具,並可列出 JSON 物件的路徑。 + externalAccess: 無效的 ping: title: Ping description: Ping 一組主機名稱、IP 位址、CIDR 或 IP 位址範圍 @@ -9759,9 +9772,155 @@ tools: title: 聲音測試儀 description: 播放測試音頻,測試揚聲器和耳機。調整音量並檢查音訊清晰度。 externalAccess: 無效的 + current-loop-4-20ma-converter: + title: 4-20 mA 轉換器 + description: 使用 NAMUR NE 43 迴路診斷,將 4-20 mA(或 0-20 mA)電流轉換為工程值,反之亦然。 + texts: + signal-label: 目前的 + label-4-20-ma: 4-20毫安 + label-0-20-ma: 0-20毫安 + voltage-0-10v-converter: + title: 0-10V轉換器 + description: 將 0-10 V、2-10 V、0-5 V、1-5 V 或 ±10 V 電壓轉換為工程值,反之亦然。 + texts: + signal-label: 電壓 + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: 模擬縮放計算器 + description: 將原始 PLC 模擬值(西門子 0-27648,施耐德 0-10000,12/15/16 位元…)轉換為工程值,反之亦然。 + texts: + signal-label: 原始值 + preset-siemens-unipolar: 西門子 S7 單極(0 至 27648) + preset-siemens-bipolar: 西門子 S7 雙極型(-27648 至 27648) + preset-schneider: 施耐德 M340/M580(0 至 10000) + preset-12-bits: 12 位元(0 到 4095) + preset-15-bits: 15 位元(0 到 32767) + preset-16-bits: 16 位元(0 到 65535) + paste-image: + texts: + copy-image: 複製影像 + copy-as-base64: 複製為 base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: 您的瀏覽器無法對 {0} 進行編碼。圖像將以 {1} 的形式下載。 + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: 輸出:{0},{1} + original-gettypelabel-image-source-type-formatbytes-image-source-size: 原文:{0},{1} + image-width-image-height-px: "{0} × {1} 像素" + clear-all: 全部清除 + images-length-images-length-1-image-images-pasted-in-this-session: 本次會話中貼了 {0} {1} + quality: "{0}%" + paste-from-clipboard: 從剪貼簿貼上 + the-image-stays-in-your-browser-nothing-is-uploaded: 圖片會保留在您的瀏覽器中,不會上傳任何內容。 + anywhere-on-this-page-to-paste-an-image: 您可以在此頁面的任何位置貼上圖片。 + press: 按 + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: 瀏覽器無法將 base64 資料 URL 複製到剪貼簿。 + base64-data-url-copied-to-the-clipboard: Base64 資料 URL 已複製到剪貼簿 + the-browser-could-not-copy-the-image-to-the-clipboard: 瀏覽器無法將圖像複製到剪貼簿。 + image-copied-to-the-clipboard: 圖片已複製到剪貼簿 + the-browser-could-not-read-the-clipboard: 瀏覽器無法讀取剪貼簿內容。 + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: 瀏覽器已阻止剪貼簿存取。請在網站設定中允許訪問,或按 {0}。 + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: 您的瀏覽器無法透過按鈕讀取剪貼簿中的圖像。請改用 {0}。 + the-browser-could-not-read-the-pasted-image: 瀏覽器無法讀取貼上的圖片。 + the-browser-could-not-convert-the-image: 瀏覽器無法轉換圖像。 + the-clipboard-has-no-image-copy-an-image-then-try-again: 剪貼簿中沒有圖片。請複製一張圖片,然後重試。 + ctrl-v: Ctrl + V + v: ⌘ + V + title: 貼上圖片 + description: 從剪貼簿貼上映像,將其轉換為 PNG、JPEG 或 WebP 格式,然後下載。 + externalAccess: 無效的 + whitespace-cleaner: + options: + texts: + convert-crlf-lf: 將 CRLF 轉換為 LF + lf-endings: LF結尾 + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: 為 Reddit、Discord 和 Slack 修剪左側行並重新合併段落 + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: 合併軟環繞段落 + smart-unwrap: 智慧解包 + strip-from-patches: 從補丁中剝離 + - {'@'}{'@'} + diff-markers: 差異標記 + remove-common-leading-indent: 移除常見的行前縮排 + indent: 縮排 + collapse-2-blank-lines-into-1: 將 2 個或多個空白行合併為 1 個空白行。 + blank-lines: 空白行 + remove-end-of-line-whitespace: 刪除行尾空格 + trailing-space: 尾隨空間 + strip-prefixes: 去掉 ●、○、⏺ 前綴 + bullet-markers: 子彈標記 + remove-characters: 移除 ─ │ └ ┐ 字符 + box-drawing: 盒子圖 + strip-color-escape-sequences: 條紋顏色轉義序列 + ansi-codes: ANSI 程式碼 + strip-1-2-1-t-prefixes: 去除 1│、2│、1\\t 前綴 + line-numbers: 行號 + texts: + cleaning-options: 清潔選項 + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: 清理後的輸出結果將顯示在此。 + paste-fragmented-claude-code-output-here: 請將零散的 Claude Code 輸出貼到這裡… + sample: 樣本 + paste: 貼上 + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: 複製失敗。輸出內容已被選取。請按 Ctrl+C 進行複製。 + copied-to-the-clipboard: 已複製到剪貼簿。 + the-clipboard-api-is-unavailable: 剪貼簿 API 不可用。 + copy-failed: 複製失敗 + copied: 已複製 ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: 0 行 · 1 個字元 · -2% + stats-value-inputlines-lines-stats-value-inputchars-chars: 0 行 · 1 個字符 + title: 空白清理器 + description: 清除終端機和 Claude 程式碼輸出:移除行號、ANSI 程式碼、方塊圖形、項目符號標記、差異標記和額外空白。 + externalAccess: 無效的 + cli-banner-generator: + title: CLI 橫幅產生器 + description: 為您的 CLI 應用程式、終端機或路由器產生 ASCII 橫幅、每日訊息 (MOTD)。 + externalAccess: 無效的 + texts: + label-border-char: 邊框字元: + placeholder-: "#" + label-width-min-20-max-200: 寬度(最小 20 – 最大 200): + label-banner-text: 橫幅文字: + placeholder-enter-motd-banner-text-here: 在此輸入每日比賽橫幅文字… + title-generated-banner: 產生的橫幅 collapsibleToolMenu: text: expanding: 正在展開…… collapsing: 正在收起…… collapse-all-tools: 收起所有工具 expand-all-tools: 展開所有工具 +analogSignalConverter: + texts: + title-input: 輸入 + title-parameters: 參數 + title-output: 輸出 + swap-direction: 交換方向 + status-ok: 在範圍內 + copy-output: 複製輸出值 + title-reference-points: 參考點 + label-signal-type: 訊號類型 + preset-custom: 風俗 + label-engineering-range: 工程最小值/最大值 + label-engineering-unit: 工程單元 + placeholder-unit: 單元 + error-signal-range: 訊號的最小值必須小於訊號的最大值。 + error-engineering-range: 工程最小值必須小於工程最大值。 + label-engineering-value: 工程價值 + label-rounded-signal: 四捨五入(整數) + status-below-range: 訊號強度低於檢測範圍。 + status-above-range: 訊號強度超出範圍。 + status-below-live-zero: 訊號低於零點,請檢查是否有斷線或感知器故障。 + engineering-below-range: 該值低於工程範圍,訊號將超出範圍。 + engineering-above-range: 該值超出工程範圍,訊號將超出範圍。 + loop-status-failure-low: 低故障(≤ 3.6 mA,NAMUR NE 43):迴路斷開、變送器未通電或變送器故障。 + loop-status-uncertain-low: 電流介於 3.6 mA 和 3.8 mA 之間:未定義區域,可能發生故障(NAMUR NE 43)。 + loop-status-under-range: 量程不足(3.8 至 4 mA):測量量程底部達到飽和。 + loop-status-over-range: 超量程(20 至 20.5 mA):測量在量程上限處達到飽和。 + loop-status-uncertain-high: 介於 20.5 和 21 mA 之間:未定義區域,可能發生故障(NAMUR NE 43)。 + loop-status-failure-high: 高故障(≥ 21 mA,NAMUR NE 43):變送器故障或短路。 + label-formula: 公式 + formula-value: 價值 + formula-signal: 訊號 + column-percent: 範圍 diff --git a/locales/zh.yml b/locales/zh.yml index 9eff90f1..0d0507e2 100644 --- a/locales/zh.yml +++ b/locales/zh.yml @@ -4159,6 +4159,7 @@ tools: label-permanent: 永久 title-generated-fw-command: 生成的防火墙命令: tag-const-zone-ref: const zone = ref + tooltip-remove: 从列表中移除 title: firewalld 命令行生成器 description: 生成 firewalld 命令行 fortune-wheel: @@ -4176,6 +4177,11 @@ tools: tag-clear-all-options: 清空所有选项 tag-no-options-added-yet-add-some-options-to-start-spinning: 尚未添加选项,请添加一些选项开始旋转! tag-: ✕ + wheel-options-wheeloptions-length: 车轮选项({0}) + spinning: 旋转…… + spin-to-win: 旋转赢大奖! + spin-the-wheel: 转动轮盘! + checkbox-remove-winner-after-spin: 旋转结束后移除中奖者 fstab-generator: title: /etc/fstab 生成器 description: 生成 /etc/fstab 行 @@ -4976,6 +4982,7 @@ tools: finance: 金融 default: 默认 toml: TOML + automation: 自动化 websocket-tester: title: WebSocket 测试工具 description: 测试 WebSocket 连接 @@ -8888,6 +8895,9 @@ tools: label-azerty: AZERTY label-dvorak: DVORAK label-colemak: COLEMAK + title: 键盘测试器 + description: 测试键盘按键,检查所有按键是否正常工作。每次按键都有视觉反馈,并支持不同的键盘布局。 + externalAccess: 无效的 markdown-to-data: texts: label-paste-your-markdown-content: 粘贴您的 Markdown 内容: @@ -9461,6 +9471,9 @@ tools: tag-copy-json-paths: 复制 JSON 路径 tag-generate-patch: 生成补丁 tag-apply-patch: 应用补丁 + title: JSON 补丁测试器 + description: 一个用于创建和测试符合 RFC 6902 规范的 JSON 补丁的简单工具,并可列出 JSON 对象的路径。 + externalAccess: 无效的 ping: title: Ping description: Ping 一组主机名、IP 地址、CIDR 或 IP 地址范围 @@ -9767,9 +9780,155 @@ tools: title: 声音测试仪 description: 播放测试音频,测试扬声器和耳机。调节音量并检查音频清晰度。 externalAccess: 无效的 + current-loop-4-20ma-converter: + title: 4-20 mA 转换器 + description: 使用 NAMUR NE 43 回路诊断,将 4-20 mA(或 0-20 mA)电流转换为工程值,反之亦然。 + texts: + signal-label: 当前的 + label-4-20-ma: 4-20毫安 + label-0-20-ma: 0-20毫安 + voltage-0-10v-converter: + title: 0-10V转换器 + description: 将 0-10 V、2-10 V、0-5 V、1-5 V 或 ±10 V 电压转换为工程值,反之亦然。 + texts: + signal-label: 电压 + label-0-10-v: 0-10V + label-2-10-v: 2-10V + label-0-5-v: 0-5V + label-1-5-v: 1-5V + label-10-v: ±10V + analog-scaling-calculator: + title: 模拟缩放计算器 + description: 将原始 PLC 模拟值(西门子 0-27648,施耐德 0-10000,12/15/16 位……)转换为工程值,反之亦然。 + texts: + signal-label: 原始值 + preset-siemens-unipolar: 西门子 S7 单极(0 至 27648) + preset-siemens-bipolar: 西门子 S7 双极型(-27648 至 27648) + preset-schneider: 施耐德 M340/M580(0 至 10000) + preset-12-bits: 12 位(0 到 4095) + preset-15-bits: 15 位(0 到 32767) + preset-16-bits: 16 位(0 到 65535) + paste-image: + texts: + copy-image: 复制图像 + copy-as-base64: 复制为 base64 + getoutputextension-image: .{0} + your-browser-cannot-encode-outputformats-image-outputformat-label-the-image-downloads-as-gettypelabel-image-output-type: 您的浏览器无法对 {0} 进行编码。图像将以 {1} 的形式下载。 + formatsizedelta-originalsize-image-source-size-outputsize-image-output-size: ({0}) + output-gettypelabel-image-output-type-formatbytes-image-output-size: 输出:{0},{1} + original-gettypelabel-image-source-type-formatbytes-image-source-size: 原文:{0},{1} + image-width-image-height-px: "{0} × {1} 像素" + clear-all: 全部清除 + images-length-images-length-1-image-images-pasted-in-this-session: 本次会话中粘贴了 {0} {1} + quality: "{0}%" + paste-from-clipboard: 从剪贴板粘贴 + the-image-stays-in-your-browser-nothing-is-uploaded: 图片会保留在您的浏览器中,不会上传任何内容。 + anywhere-on-this-page-to-paste-an-image: 您可以在此页面的任何位置粘贴图片。 + press: 按 + the-browser-could-not-copy-the-base64-data-url-to-the-clipboard: 浏览器无法将 base64 数据 URL 复制到剪贴板。 + base64-data-url-copied-to-the-clipboard: Base64 数据 URL 已复制到剪贴板 + the-browser-could-not-copy-the-image-to-the-clipboard: 浏览器无法将图像复制到剪贴板。 + image-copied-to-the-clipboard: 图片已复制到剪贴板 + the-browser-could-not-read-the-clipboard: 浏览器无法读取剪贴板内容。 + the-browser-blocked-clipboard-access-allow-it-in-the-site-settings-or-press-pasteshortcut: 浏览器已阻止剪贴板访问。请在网站设置中允许访问,或按 {0}。 + your-browser-cannot-read-images-from-the-clipboard-with-a-button-press-pasteshortcut-instead: 您的浏览器无法通过按钮读取剪贴板中的图像。请改用 {0}。 + the-browser-could-not-read-the-pasted-image: 浏览器无法读取粘贴的图片。 + the-browser-could-not-convert-the-image: 浏览器无法转换图像。 + the-clipboard-has-no-image-copy-an-image-then-try-again: 剪贴板中没有图片。请复制一张图片,然后重试。 + ctrl-v: Ctrl + V + v: ⌘ + V + title: 粘贴图片 + description: 从剪贴板粘贴图像,将其转换为 PNG、JPEG 或 WebP 格式,然后下载。 + externalAccess: 无效的 + whitespace-cleaner: + options: + texts: + convert-crlf-lf: 将 CRLF 转换为 LF + lf-endings: LF结尾 + left-trim-lines-and-rejoin-paragraphs-for-reddit-discord-slack: 为 Reddit、Discord 和 Slack 修剪左侧行并重新合并段落 + markdown-reddit: Markdown / Reddit + join-soft-wrapped-paragraphs: 合并软环绕段落 + smart-unwrap: 智能解包 + strip-from-patches: 从补丁中剥离 + - {'@'}{'@'} + diff-markers: 差异标记 + remove-common-leading-indent: 移除常见的行前缩进 + indent: 缩进 + collapse-2-blank-lines-into-1: 将 2 个或更多空行合并为 1 个空行。 + blank-lines: 空白行 + remove-end-of-line-whitespace: 删除行尾空格 + trailing-space: 尾随空间 + strip-prefixes: 去掉 ●、○、⏺ 前缀 + bullet-markers: 子弹标记 + remove-characters: 移除 ─ │ └ ┐ 字符 + box-drawing: 盒子图 + strip-color-escape-sequences: 条纹颜色转义序列 + ansi-codes: ANSI 代码 + strip-1-2-1-t-prefixes: 去除 1│、2│、1\\t 前缀 + line-numbers: 行号 + texts: + cleaning-options: 清洁选项 + ctrl-a-ctrl-c: ⌘/Ctrl+A · Ctrl+C + your-cleaned-output-will-appear-here: 清理后的输出结果将显示在此处。 + paste-fragmented-claude-code-output-here: 请将零散的 Claude Code 输出粘贴到这里…… + sample: 样本 + paste: 粘贴 + copy-failed-the-output-is-selected-press-ctrl-c-to-copy-it: 复制失败。输出内容已被选中。请按 Ctrl+C 进行复制。 + copied-to-the-clipboard: 已复制到剪贴板。 + the-clipboard-api-is-unavailable: 剪贴板 API 不可用。 + copy-failed: 复制失败 + copied: 已复制 ✓ + stats-value-outputlines-lines-stats-value-outputchars-chars-stats-value-savedpercent: 0 行 · 1 个字符 · -2% + stats-value-inputlines-lines-stats-value-inputchars-chars: 0 行 · 1 个字符 + title: 空格清理器 + description: 清除终端和 Claude 代码输出:去除行号、ANSI 代码、方框图形、项目符号标记、差异标记和额外空白。 + externalAccess: 无效的 + cli-banner-generator: + title: CLI 横幅生成器 + description: 为您的 CLI 应用程序、终端或路由器生成 ASCII 横幅、每日消息 (MOTD)。 + externalAccess: 无效的 + texts: + label-border-char: 边框字符: + placeholder-: "#" + label-width-min-20-max-200: 宽度(最小 20 – 最大 200): + label-banner-text: 横幅文字: + placeholder-enter-motd-banner-text-here: 在此输入每日比赛横幅文字…… + title-generated-banner: 生成的横幅 collapsibleToolMenu: text: expanding: 正在展开…… collapsing: 正在收起…… collapse-all-tools: 收起所有工具 expand-all-tools: 展开所有工具 +analogSignalConverter: + texts: + title-input: 输入 + title-parameters: 参数 + title-output: 输出 + swap-direction: 交换方向 + status-ok: 在范围内 + copy-output: 复制输出值 + title-reference-points: 参考点 + label-signal-type: 信号类型 + preset-custom: 风俗 + label-engineering-range: 工程最小值/最大值 + label-engineering-unit: 工程单元 + placeholder-unit: 单元 + error-signal-range: 信号的最小值必须小于信号的最大值。 + error-engineering-range: 工程最小值必须小于工程最大值。 + label-engineering-value: 工程价值 + label-rounded-signal: 四舍五入(整数) + status-below-range: 信号强度低于检测范围。 + status-above-range: 信号强度超出范围。 + status-below-live-zero: 信号低于零点,请检查是否有断线或传感器故障。 + engineering-below-range: 该值低于工程范围,信号将超出范围。 + engineering-above-range: 该值超出工程范围,信号将超出范围。 + loop-status-failure-low: 低故障(≤ 3.6 mA,NAMUR NE 43):回路断开、变送器未通电或变送器故障。 + loop-status-uncertain-low: 电流介于 3.6 mA 和 3.8 mA 之间:未定义区域,可能发生故障(NAMUR NE 43)。 + loop-status-under-range: 量程不足(3.8 至 4 mA):测量在量程底部达到饱和。 + loop-status-over-range: 超量程(20 至 20.5 mA):测量在量程上限处达到饱和。 + loop-status-uncertain-high: 介于 20.5 和 21 mA 之间:未定义区域,可能发生故障(NAMUR NE 43)。 + loop-status-failure-high: 高故障(≥ 21 mA,NAMUR NE 43):变送器故障或短路。 + label-formula: 公式 + formula-value: 价值 + formula-signal: 信号 + column-percent: 范围 diff --git a/src/tools/cli-banner-generator/cli-banner-generator.vue b/src/tools/cli-banner-generator/cli-banner-generator.vue index bb675023..c33a0e49 100644 --- a/src/tools/cli-banner-generator/cli-banner-generator.vue +++ b/src/tools/cli-banner-generator/cli-banner-generator.vue @@ -1,6 +1,9 @@