From bf943dd61b99d9a9fc77a78411e85b362bbe7d28 Mon Sep 17 00:00:00 2001 From: Fechin Date: Thu, 30 May 2024 10:41:13 +0800 Subject: [PATCH] docs: adjust the color and icon --- ...uino-program.md => arduino-programming.md} | 1054 ++++++++--------- source/assets/icon/arduino-programming.svg | 4 + 2 files changed, 531 insertions(+), 527 deletions(-) rename source/_posts/{arduino-program.md => arduino-programming.md} (94%) create mode 100644 source/assets/icon/arduino-programming.svg diff --git a/source/_posts/arduino-program.md b/source/_posts/arduino-programming.md similarity index 94% rename from source/_posts/arduino-program.md rename to source/_posts/arduino-programming.md index 875b161..3a4dd54 100644 --- a/source/_posts/arduino-program.md +++ b/source/_posts/arduino-programming.md @@ -1,527 +1,527 @@ ---- -title: Arduino Programming -date: 2024-05-29 8:58:31 -background: bg-[#409096] -label: -tags: -cpp - -I/O -categories: - - Programming -intro: | - Ardunio programming cheat-sheet for I/O programming and ardunio board programming. - -plugins: - - copyCode ---- - -## Getting Started - -### Gather Necessary Materials - -- Arduino Board: Any model, such as Arduino Uno, Mega, Nano, etc. -- USB Cable: Compatible with your Arduino board (commonly USB Type-A to Type-B for Uno). -- Computer: Windows, macOS, or Linux. - -### Install the Arduino IDE - -- windows/mac/linux -- Go to the Arduino Software page. -- Download the os installer. -- Run the installer and follow the instructions. - -### Connect Your Arduino Board - -- Connect the Arduino board to your computer using the USB cable. -- The power LED on the Arduino should light up, indicating it’s receiving power. - -### Configure the Arduino IDE - -- Open the Arduino IDE. -- Select Your Board: -- Go to Tools > Board and select the model of your Arduino board (e.g., Arduino Uno). - -- Select the Port: - -- Go to Tools > Port and select the port that the Arduino is connected to (it usually shows as COMx on Windows, /dev/cu.usbmodemxxxx on macOS, and /dev/ttyUSBx on Linux). - -## Basic Structure - -### Setup and Loop - -```cpp -void setup() { - // Code here runs once -} - -void loop() { - // Code here runs repeatedly -} -``` - -### Comment - -```cpp -// Single-line comment - -/* -Multi-line -comment -*/ -``` - -### Variable - -```cpp -int ledPin = 13; // Integer -float voltage = 5.0; // Floating-point number -char letter = 'A'; // Character -String text = "Hello"; // String -``` - -### Pin Modes - -```cpp -pinMode(pin, mode); -``` - -### Digital I/O - -```cpp -digitalWrite(pin, value); -int value = digitalRead(pin); - -``` - -### Analog I/O - -```cpp -analogWrite(pin, value); -int value = analogRead(pin); - -``` - -## Serial Communication - -### Begin Serial Communication - -```cpp -Serial.begin(baudRate); -``` - -### Print to Serial Monitor - -```cpp -Serial.print(data); -Serial.println(data); -``` - -### Read from Serial Monitor - -```cpp -if (Serial.available()) { - char data = Serial.read(); -} -``` - -## Control Structures - -### If Statement - -```cpp -if (condition) { - // Code to execute if condition is true -} else { - // Code to execute if condition is false -} -``` - -### For Loop - -```cpp -for (initialization; condition; increment) { - // Code to execute -} -``` - -### While Loop - -```cpp -while (condition) { - // Code to execute -} -``` - -### Functions - -```cpp -returnType functionName(parameters) { - // Code to execute - return value; -} -``` - -## Libraries - -### Include a Library - -```cpp -#include -``` - -### Using a Library - -```cpp -#include - -Servo myServo; - -void setup() { - myServo.attach(9); // Attach servo to pin 9 -} - -void loop() { - myServo.write(90); // Set servo to 90 degrees - delay(1000); - myServo.write(0); // Set servo to 0 degrees - delay(1000); -} -``` - -## Common Functions - -### Delay - -```cpp -delay(milliseconds); - -``` - -### Millis - -```cpp -unsigned long currentTime = millis(); - -``` - -### Map - -```cpp -long outputValue = map(inputValue, fromLow, fromHigh, toLow, toHigh); - -``` - -### Random - -```cpp -long randomValue = random(max); -long randomValue = random(min, max); - -``` - -### Random Seed - -```cpp -randomSeed(analogRead(0)); // Seed from analog pin 0 - -``` - -## Sensors and Modules - -### Reading Temperature with DHT Sensor - -```cpp -#include - -#define DHTPIN 2 // Pin which is connected to the DHT sensor -#define DHTTYPE DHT11 // DHT 11 - -DHT dht(DHTPIN, DHTTYPE); - -void setup() { - Serial.begin(9600); - dht.begin(); -} - -void loop() { - float humidity = dht.readHumidity(); - float temperature = dht.readTemperature(); - - Serial.print("Humidity: "); - Serial.print(humidity); - Serial.print(" %\t"); - Serial.print("Temperature: "); - Serial.print(temperature); - Serial.println(" *C"); - - delay(2000); -} -``` - -### Blinking LED - -```cpp -const int ledPin = 13; - -void setup() { - pinMode(ledPin, OUTPUT); -} - -void loop() { - digitalWrite(ledPin, HIGH); // Turn the LED on - delay(1000); // Wait for 1 second - digitalWrite(ledPin, LOW); // Turn the LED off - delay(1000); // Wait for 1 second -} - -``` - -### Read Button Input - -```cpp -const int buttonPin = 2; // Pin where the push button is connected -const int ledPin = 13; // Pin where the LED is connected - -void setup() { - pinMode(buttonPin, INPUT); // Set the button pin as an input - pinMode(ledPin, OUTPUT); // Set the LED pin as an output -} - -void loop() { - int buttonState = digitalRead(buttonPin); // Read the state of the button - - if (buttonState == HIGH) { - digitalWrite(ledPin, HIGH); // Turn the LED on - } else { - digitalWrite(ledPin, LOW); // Turn the LED off - } -} - - -``` - -### Analog Input - -```cpp -const int potPin = A0; // Pin where the potentiometer is connected -const int ledPin = 9; // Pin where the LED is connected - -void setup() { - pinMode(ledPin, OUTPUT); // Set the LED pin as an output -} - -void loop() { - int potValue = analogRead(potPin); // Read the potentiometer value - int ledBrightness = map(potValue, 0, 1023, 0, 255); // Map the value to a range from 0 to 255 - - analogWrite(ledPin, ledBrightness); // Set the brightness of the LED - delay(10); // Small delay to make the LED change smoothly -} - - -``` - -### Serial Communication - -```cpp -void setup() { - Serial.begin(9600); // Start the serial communication at 9600 baud rate -} - -void loop() { - Serial.println("Hello, world!"); // Send a message to the serial monitor - delay(1000); // Wait for 1 second -} - - -``` - -### Temperature Sensor - -```cpp -const int tempPin = A0; // Pin where the TMP36 sensor is connected - -void setup() { - Serial.begin(9600); // Start the serial communication at 9600 baud rate -} - -void loop() { - int tempValue = analogRead(tempPin); // Read the sensor value - float voltage = tempValue * (5.0 / 1023.0); // Convert the value to voltage - float temperatureC = (voltage - 0.5) * 100; // Convert the voltage to temperature in Celsius - - Serial.print("Temperature: "); - Serial.print(temperatureC); - Serial.println(" C"); - delay(1000); // Wait for 1 second -} - - -``` - -### RGB LED Control - -```cpp -const int redPin = 9; -const int greenPin = 10; -const int bluePin = 11; - -const int potRedPin = A0; -const int potGreenPin = A1; -const int potBluePin = A2; - -void setup() { - pinMode(redPin, OUTPUT); - pinMode(greenPin, OUTPUT); - pinMode(bluePin, OUTPUT); -} - -void loop() { - int redValue = analogRead(potRedPin); - int greenValue = analogRead(potGreenPin); - int blueValue = analogRead(potBluePin); - - analogWrite(redPin, map(redValue, 0, 1023, 0, 255)); - analogWrite(greenPin, map(greenValue, 0, 1023, 0, 255)); - analogWrite(bluePin, map(blueValue, 0, 1023, 0, 255)); - - delay(10); -} - -``` - -### Ultrasonic Sensor - -```cpp -const int trigPin = 9; -const int echoPin = 10; - -void setup() { - Serial.begin(9600); - pinMode(trigPin, OUTPUT); - pinMode(echoPin, INPUT); -} - -void loop() { - long duration; - int distance; - - digitalWrite(trigPin, LOW); - delayMicroseconds(2); - digitalWrite(trigPin, HIGH); - delayMicroseconds(10); - digitalWrite(trigPin, LOW); - - duration = pulseIn(echoPin, HIGH); - distance = duration * 0.034 / 2; - - Serial.print("Distance: "); - Serial.print(distance); - Serial.println(" cm"); - delay(1000); -} -``` - -### Controlling a Servo Motor - -```cpp -#include - -Servo myServo; -const int potPin = A0; - -void setup() { - myServo.attach(9); // Attach the servo to pin 9 -} - -void loop() { - int potValue = analogRead(potPin); // Read the potentiometer value - int angle = map(potValue, 0, 1023, 0, 180); // Map the value to an angle between 0 and 180 - - myServo.write(angle); // Set the servo position - delay(15); // Small delay for the servo to reach the position -} - -``` - -### Displaying Text on an LCD - -```cpp -#include - -// Initialize the library with the numbers of the interface pins -LiquidCrystal lcd(12, 11, 5, 4, 3, 2); - -void setup() { - // Set up the LCD's number of columns and rows - lcd.begin(16, 2); - // Print a message to the LCD - lcd.print("Hello, World!"); -} - -void loop() { - // Set the cursor to column 0, line 1 (second row) - lcd.setCursor(0, 1); - // Print the number of seconds since reset - lcd.print(millis() / 1000); -} -``` - -## Wireless Communication with NRF24L01 - -### Transmitter Code - -```cpp -#include -#include -#include - -RF24 radio(9, 10); // CE, CSN pins - -const byte address[6] = "00001"; // Address - -void setup() { - radio.begin(); - radio.openWritingPipe(address); - radio.setPALevel(RF24_PA_MIN); - radio.stopListening(); -} - -void loop() { - const char text[] = "Hello"; - radio.write(&text, sizeof(text)); - delay(1000); -} -``` - -### Receiver Code - -```cpp -#include -#include -#include - -RF24 radio(9, 10); // CE, CSN pins - -const byte address[6] = "00001"; // Address - -void setup() { - Serial.begin(9600); - radio.begin(); - radio.openReadingPipe(0, address); - radio.setPALevel(RF24_PA_MIN); - radio.startListening(); -} - -void loop() { - if (radio.available()) { - char text[32] = ""; - radio.read(&text, sizeof(text)); - Serial.println(text); - } -} - -``` - -## Also Read - -- [Ardunio](https://www.arduino.cc/en/software) +--- +title: Arduino Programming +date: 2024-05-29 8:58:31 +background: bg-[#387f83] +label: +tags: -cpp + -I/O +categories: + - Programming +intro: | + Ardunio programming cheat-sheet for I/O programming and ardunio board programming. + +plugins: + - copyCode +--- + +## Getting Started + +### Gather Necessary Materials + +- Arduino Board: Any model, such as Arduino Uno, Mega, Nano, etc. +- USB Cable: Compatible with your Arduino board (commonly USB Type-A to Type-B for Uno). +- Computer: Windows, macOS, or Linux. + +### Install the Arduino IDE + +- windows/mac/linux +- Go to the Arduino Software page. +- Download the os installer. +- Run the installer and follow the instructions. + +### Connect Your Arduino Board + +- Connect the Arduino board to your computer using the USB cable. +- The power LED on the Arduino should light up, indicating it’s receiving power. + +### Configure the Arduino IDE + +- Open the Arduino IDE. +- Select Your Board: +- Go to Tools > Board and select the model of your Arduino board (e.g., Arduino Uno). + +- Select the Port: + +- Go to Tools > Port and select the port that the Arduino is connected to (it usually shows as COMx on Windows, /dev/cu.usbmodemxxxx on macOS, and /dev/ttyUSBx on Linux). + +## Basic Structure + +### Setup and Loop + +```cpp +void setup() { + // Code here runs once +} + +void loop() { + // Code here runs repeatedly +} +``` + +### Comment + +```cpp +// Single-line comment + +/* +Multi-line +comment +*/ +``` + +### Variable + +```cpp +int ledPin = 13; // Integer +float voltage = 5.0; // Floating-point number +char letter = 'A'; // Character +String text = "Hello"; // String +``` + +### Pin Modes + +```cpp +pinMode(pin, mode); +``` + +### Digital I/O + +```cpp +digitalWrite(pin, value); +int value = digitalRead(pin); + +``` + +### Analog I/O + +```cpp +analogWrite(pin, value); +int value = analogRead(pin); + +``` + +## Serial Communication + +### Begin Serial Communication + +```cpp +Serial.begin(baudRate); +``` + +### Print to Serial Monitor + +```cpp +Serial.print(data); +Serial.println(data); +``` + +### Read from Serial Monitor + +```cpp +if (Serial.available()) { + char data = Serial.read(); +} +``` + +## Control Structures + +### If Statement + +```cpp +if (condition) { + // Code to execute if condition is true +} else { + // Code to execute if condition is false +} +``` + +### For Loop + +```cpp +for (initialization; condition; increment) { + // Code to execute +} +``` + +### While Loop + +```cpp +while (condition) { + // Code to execute +} +``` + +### Functions + +```cpp +returnType functionName(parameters) { + // Code to execute + return value; +} +``` + +## Libraries + +### Include a Library + +```cpp +#include +``` + +### Using a Library + +```cpp +#include + +Servo myServo; + +void setup() { + myServo.attach(9); // Attach servo to pin 9 +} + +void loop() { + myServo.write(90); // Set servo to 90 degrees + delay(1000); + myServo.write(0); // Set servo to 0 degrees + delay(1000); +} +``` + +## Common Functions + +### Delay + +```cpp +delay(milliseconds); + +``` + +### Millis + +```cpp +unsigned long currentTime = millis(); + +``` + +### Map + +```cpp +long outputValue = map(inputValue, fromLow, fromHigh, toLow, toHigh); + +``` + +### Random + +```cpp +long randomValue = random(max); +long randomValue = random(min, max); + +``` + +### Random Seed + +```cpp +randomSeed(analogRead(0)); // Seed from analog pin 0 + +``` + +## Sensors and Modules + +### Reading Temperature with DHT Sensor + +```cpp +#include + +#define DHTPIN 2 // Pin which is connected to the DHT sensor +#define DHTTYPE DHT11 // DHT 11 + +DHT dht(DHTPIN, DHTTYPE); + +void setup() { + Serial.begin(9600); + dht.begin(); +} + +void loop() { + float humidity = dht.readHumidity(); + float temperature = dht.readTemperature(); + + Serial.print("Humidity: "); + Serial.print(humidity); + Serial.print(" %\t"); + Serial.print("Temperature: "); + Serial.print(temperature); + Serial.println(" *C"); + + delay(2000); +} +``` + +### Blinking LED + +```cpp +const int ledPin = 13; + +void setup() { + pinMode(ledPin, OUTPUT); +} + +void loop() { + digitalWrite(ledPin, HIGH); // Turn the LED on + delay(1000); // Wait for 1 second + digitalWrite(ledPin, LOW); // Turn the LED off + delay(1000); // Wait for 1 second +} + +``` + +### Read Button Input + +```cpp +const int buttonPin = 2; // Pin where the push button is connected +const int ledPin = 13; // Pin where the LED is connected + +void setup() { + pinMode(buttonPin, INPUT); // Set the button pin as an input + pinMode(ledPin, OUTPUT); // Set the LED pin as an output +} + +void loop() { + int buttonState = digitalRead(buttonPin); // Read the state of the button + + if (buttonState == HIGH) { + digitalWrite(ledPin, HIGH); // Turn the LED on + } else { + digitalWrite(ledPin, LOW); // Turn the LED off + } +} + + +``` + +### Analog Input + +```cpp +const int potPin = A0; // Pin where the potentiometer is connected +const int ledPin = 9; // Pin where the LED is connected + +void setup() { + pinMode(ledPin, OUTPUT); // Set the LED pin as an output +} + +void loop() { + int potValue = analogRead(potPin); // Read the potentiometer value + int ledBrightness = map(potValue, 0, 1023, 0, 255); // Map the value to a range from 0 to 255 + + analogWrite(ledPin, ledBrightness); // Set the brightness of the LED + delay(10); // Small delay to make the LED change smoothly +} + + +``` + +### Serial Communication + +```cpp +void setup() { + Serial.begin(9600); // Start the serial communication at 9600 baud rate +} + +void loop() { + Serial.println("Hello, world!"); // Send a message to the serial monitor + delay(1000); // Wait for 1 second +} + + +``` + +### Temperature Sensor + +```cpp +const int tempPin = A0; // Pin where the TMP36 sensor is connected + +void setup() { + Serial.begin(9600); // Start the serial communication at 9600 baud rate +} + +void loop() { + int tempValue = analogRead(tempPin); // Read the sensor value + float voltage = tempValue * (5.0 / 1023.0); // Convert the value to voltage + float temperatureC = (voltage - 0.5) * 100; // Convert the voltage to temperature in Celsius + + Serial.print("Temperature: "); + Serial.print(temperatureC); + Serial.println(" C"); + delay(1000); // Wait for 1 second +} + + +``` + +### RGB LED Control + +```cpp +const int redPin = 9; +const int greenPin = 10; +const int bluePin = 11; + +const int potRedPin = A0; +const int potGreenPin = A1; +const int potBluePin = A2; + +void setup() { + pinMode(redPin, OUTPUT); + pinMode(greenPin, OUTPUT); + pinMode(bluePin, OUTPUT); +} + +void loop() { + int redValue = analogRead(potRedPin); + int greenValue = analogRead(potGreenPin); + int blueValue = analogRead(potBluePin); + + analogWrite(redPin, map(redValue, 0, 1023, 0, 255)); + analogWrite(greenPin, map(greenValue, 0, 1023, 0, 255)); + analogWrite(bluePin, map(blueValue, 0, 1023, 0, 255)); + + delay(10); +} + +``` + +### Ultrasonic Sensor + +```cpp +const int trigPin = 9; +const int echoPin = 10; + +void setup() { + Serial.begin(9600); + pinMode(trigPin, OUTPUT); + pinMode(echoPin, INPUT); +} + +void loop() { + long duration; + int distance; + + digitalWrite(trigPin, LOW); + delayMicroseconds(2); + digitalWrite(trigPin, HIGH); + delayMicroseconds(10); + digitalWrite(trigPin, LOW); + + duration = pulseIn(echoPin, HIGH); + distance = duration * 0.034 / 2; + + Serial.print("Distance: "); + Serial.print(distance); + Serial.println(" cm"); + delay(1000); +} +``` + +### Controlling a Servo Motor + +```cpp +#include + +Servo myServo; +const int potPin = A0; + +void setup() { + myServo.attach(9); // Attach the servo to pin 9 +} + +void loop() { + int potValue = analogRead(potPin); // Read the potentiometer value + int angle = map(potValue, 0, 1023, 0, 180); // Map the value to an angle between 0 and 180 + + myServo.write(angle); // Set the servo position + delay(15); // Small delay for the servo to reach the position +} + +``` + +### Displaying Text on an LCD + +```cpp +#include + +// Initialize the library with the numbers of the interface pins +LiquidCrystal lcd(12, 11, 5, 4, 3, 2); + +void setup() { + // Set up the LCD's number of columns and rows + lcd.begin(16, 2); + // Print a message to the LCD + lcd.print("Hello, World!"); +} + +void loop() { + // Set the cursor to column 0, line 1 (second row) + lcd.setCursor(0, 1); + // Print the number of seconds since reset + lcd.print(millis() / 1000); +} +``` + +## Wireless Communication with NRF24L01 + +### Transmitter Code + +```cpp +#include +#include +#include + +RF24 radio(9, 10); // CE, CSN pins + +const byte address[6] = "00001"; // Address + +void setup() { + radio.begin(); + radio.openWritingPipe(address); + radio.setPALevel(RF24_PA_MIN); + radio.stopListening(); +} + +void loop() { + const char text[] = "Hello"; + radio.write(&text, sizeof(text)); + delay(1000); +} +``` + +### Receiver Code + +```cpp +#include +#include +#include + +RF24 radio(9, 10); // CE, CSN pins + +const byte address[6] = "00001"; // Address + +void setup() { + Serial.begin(9600); + radio.begin(); + radio.openReadingPipe(0, address); + radio.setPALevel(RF24_PA_MIN); + radio.startListening(); +} + +void loop() { + if (radio.available()) { + char text[32] = ""; + radio.read(&text, sizeof(text)); + Serial.println(text); + } +} + +``` + +## Also Read + +- [Ardunio](https://www.arduino.cc/en/software) diff --git a/source/assets/icon/arduino-programming.svg b/source/assets/icon/arduino-programming.svg new file mode 100644 index 0000000..b47b622 --- /dev/null +++ b/source/assets/icon/arduino-programming.svg @@ -0,0 +1,4 @@ + + +